---------------------------------------------------------- RV10-List Digest Archive --- Total Messages Posted Wed 03/02/11: 31 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 06:29 AM - Airworthiness Certificate (Strasnuts) 2. 06:48 AM - Re: Airworthiness Certificate (Kelly McMullen) 3. 06:49 AM - Re: Airworthiness Certificate (Tim Olson) 4. 06:52 AM - Re: Airworthiness Certificate (Marcus Cooper) 5. 06:54 AM - Re: Airworthiness Certificate (Alan Mekler MD) 6. 07:02 AM - Re: Airworthiness Certificate (Seano) 7. 07:03 AM - Re: Airworthiness Certificate (Bob Leffler) 8. 07:21 AM - Re: Airworthiness Certificate (Tim Olson) 9. 07:24 AM - Re: sun n fun (Geoff Combs) 10. 07:26 AM - Re: Airworthiness Certificate (Ross Wendell) 11. 07:49 AM - Re: Airworthiness Certificate (John Jessen) 12. 07:54 AM - Re: Airworthiness Certificate (John J) 13. 08:46 AM - Re: Airworthiness Certificate (Deems Davis) 14. 09:22 AM - Re: Airworthiness Certificate (Robin Marks) 15. 09:39 AM - Re: Airworthiness Certificate (Jeff Carpenter) 16. 09:40 AM - Re: Airworthiness Certificate (Seano) 17. 10:46 AM - Re: Airworthiness Certificate (Byron) 18. 11:43 AM - Re: Airworthiness Certificate (Robin Marks) 19. 01:18 PM - Re: Airworthiness Certificate (Scott Schmidt) 20. 01:31 PM - Re: Airworthiness Certificate (Seano) 21. 03:03 PM - Re: Airworthiness Certificate (Linn Walters) 22. 03:42 PM - Re: Airworthiness Certificate (Phil Barnette) 23. 04:29 PM - Re: Airworthiness Certificate (Robin Marks) 24. 04:39 PM - Re: sun n fun (ivankris) 25. 04:51 PM - Re: Airworthiness Certificate (Phil Barnette) 26. 05:51 PM - Re: Airworthiness Certificate (Seano) 27. 07:48 PM - Re: Airworthiness Certificate (David Leikam) 28. 08:58 PM - FS: Nearly Completed RV-10 Project (DFW) (2eyedocs) 29. 09:31 PM - Re: Airworthiness Certificate (Rick Lark) 30. 09:43 PM - Re: Airworthiness Certificate (Rick Lark) 31. 10:04 PM - Re: Airworthiness Certificate (Robin Marks) ________________________________ Message 1 _____________________________________ Time: 06:29:40 AM PST US Subject: RV10-List: Airworthiness Certificate From: "Strasnuts" After two years of building slow kit number 40936 I finally received my airworthiness certificate. Inspection went well even though I had my DAR and the FAA there. The FAA was there inspecting the DAR. I guess this happens twice a year and I was the lucky recipient. Five hours for the inspection. I had to cap off a couple wires I ran for future use and that was it. Pictures coming soon. -------- Cust. #40936 RV-10 SB Fuselage N801VR reserved Read this topic online here: http://forums.matronics.com/viewtopic.php?p=332478#332478 ________________________________ Message 2 _____________________________________ Time: 06:48:35 AM PST US Subject: Re: RV10-List: Airworthiness Certificate From: Kelly McMullen Congratulations Sean. Time to get all the test flight plans prepared, to be ready for the day the weather gods decide will be right for the first flight. On Wed, Mar 2, 2011 at 7:26 AM, Strasnuts wrote: > > After two years of building slow kit number 40936 I finally received my airworthiness certificate. Inspection went well even though I had my DAR and the FAA there. The FAA was there inspecting the DAR. I guess this happens twice a year and I was the lucky recipient. Five hours for the inspection. I had to cap off a couple wires I ran for future use and that was it. Pictures coming soon. > > -------- > Cust. #40936 > RV-10 SB Fuselage > N801VR reserved > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=332478#332478 > > ________________________________ Message 3 _____________________________________ Time: 06:49:40 AM PST US From: Tim Olson Subject: Re: RV10-List: Airworthiness Certificate When you get your flyoff area designated, let me know. I may be flying through the area soon, and I'll plot it on a chart and just steer completely clear. :) Tim Olson - RV-10 N104CD do not archive On 3/2/2011 8:26 AM, Strasnuts wrote: > --> RV10-List message posted by: "Strasnuts" > > After two years of building slow kit number 40936 I finally received my airworthiness certificate. Inspection went well even though I had my DAR and the FAA there. The FAA was there inspecting the DAR. I guess this happens twice a year and I was the lucky recipient. Five hours for the inspection. I had to cap off a couple wires I ran for future use and that was it. Pictures coming soon. > > -------- > Cust. #40936 > RV-10 SB Fuselage > N801VR reserved > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=332478#332478 > > ________________________________ Message 4 _____________________________________ Time: 06:52:22 AM PST US From: "Marcus Cooper" Subject: RE: RV10-List: Airworthiness Certificate Congratulations!!! Excellent work to survive the dual inspection so well. Have fun flying, Marcus 40286 - anxious to cross the 500hr mark Do not archive -----Original Message----- From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Strasnuts Sent: Wednesday, March 02, 2011 9:26 AM Subject: RV10-List: Airworthiness Certificate After two years of building slow kit number 40936 I finally received my airworthiness certificate. Inspection went well even though I had my DAR and the FAA there. The FAA was there inspecting the DAR. I guess this happens twice a year and I was the lucky recipient. Five hours for the inspection. I had to cap off a couple wires I ran for future use and that was it. Pictures coming soon. -------- Cust. #40936 RV-10 SB Fuselage N801VR reserved Read this topic online here: http://forums.matronics.com/viewtopic.php?p=332478#332478 ________________________________ Message 5 _____________________________________ Time: 06:54:40 AM PST US Subject: Re: RV10-List: Airworthiness Certificate From: Alan Mekler MD Sean, Congratulations! Alan Sent from my iPhone On Mar 2, 2011, at 9:26 AM, "Strasnuts" wrote: > > After two years of building slow kit number 40936 I finally received my airworthiness certificate. Inspection went well even though I had my DAR and the FAA there. The FAA was there inspecting the DAR. I guess this happens twice a year and I was the lucky recipient. Five hours for the inspection. I had to cap off a couple wires I ran for future use and that was it. Pictures coming soon. > > -------- > Cust. #40936 > RV-10 SB Fuselage > N801VR reserved > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=332478#332478 > > > > > > > > > > ________________________________ Message 6 _____________________________________ Time: 07:02:54 AM PST US Subject: Re: RV10-List: Airworthiness Certificate From: Seano I want to fly even though the windows are masked for priming the cabin cover. I'm glad I have synthetic vision ;) stay clear Tim! Sent from my iPhone On Mar 2, 2011, at 7:46, Tim Olson wrote: > > When you get your flyoff area designated, let me know. I may be > flying through the area soon, and I'll plot it on a chart > and just steer completely clear. :) > > Tim Olson - RV-10 N104CD > do not archive > > > On 3/2/2011 8:26 AM, Strasnuts wrote: >> --> RV10-List message posted by: "Strasnuts" >> >> After two years of building slow kit number 40936 I finally received my airworthiness certificate. Inspection went well even though I had my DAR and the FAA there. The FAA was there inspecting the DAR. I guess this happens twice a year and I was the lucky recipient. Five hours for the inspection. I had to cap off a couple wires I ran for future use and that was it. Pictures coming soon. >> >> -------- >> Cust. #40936 >> RV-10 SB Fuselage >> N801VR reserved >> >> >> >> >> Read this topic online here: >> >> http://forums.matronics.com/viewtopic.php?p=332478#332478 >> >> >> >> >> >> >> >> >> >> > > > > ________________________________ Message 7 _____________________________________ Time: 07:03:58 AM PST US Subject: Re: RV10-List: Airworthiness Certificate From: Bob Leffler Great news! Congrats!!!! Bob Sent from my iPhone On Mar 2, 2011, at 9:26 AM, "Strasnuts" wrote: > ________________________________ Message 8 _____________________________________ Time: 07:21:56 AM PST US From: Tim Olson Subject: Re: RV10-List: Airworthiness Certificate It's just like flying on a frosty day...no big deal. Scrape clear one area about 3" x 3" on your windshield and you're good to go. We do it all the time up here in the winter, and heck, my car doesn't even have synthetic vision. Tim Olson - RV-10 N104CD do not archive On 3/2/2011 8:57 AM, Seano wrote: > --> RV10-List message posted by: Seano > > I want to fly even though the windows are masked for priming the cabin cover. I'm glad I have synthetic vision ;) stay clear Tim! > > Sent from my iPhone > > On Mar 2, 2011, at 7:46, Tim Olson wrote: > >> --> RV10-List message posted by: Tim Olson >> >> When you get your flyoff area designated, let me know. I may be >> flying through the area soon, and I'll plot it on a chart >> and just steer completely clear. :) >> >> Tim Olson - RV-10 N104CD >> do not archive >> >> >> On 3/2/2011 8:26 AM, Strasnuts wrote: >>> --> RV10-List message posted by: "Strasnuts" >>> >>> After two years of building slow kit number 40936 I finally received my airworthiness certificate. Inspection went well even though I had my DAR and the FAA there. The FAA was there inspecting the DAR. I guess this happens twice a year and I was the lucky recipient. Five hours for the inspection. I had to cap off a couple wires I ran for future use and that was it. Pictures coming soon. >>> >>> -------- >>> Cust. #40936 >>> RV-10 SB Fuselage >>> N801VR reserved >>> >>> >>> >>> >>> Read this topic online here: >>> >>> http://forums.matronics.com/viewtopic.php?p=332478#332478 >>> >>> >>> >>> >>> >>> >>> >>> >>> >>> >> >> >> >> > > ________________________________ Message 9 _____________________________________ Time: 07:24:15 AM PST US From: "Geoff Combs" Subject: RE: RV10-List: sun n fun Greg I'll be there with my RV-10 the 29-31 maybe longer. Geoff Geoff Combs President 614-834-5227p 614-834-5230f www.aerosportmodeling.com _____ From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Jesse Saint Sent: Tuesday, March 01, 2011 7:57 PM Subject: Re: RV10-List: sun n fun I'll be at the Maverick booth right next to Van's all week. Stop by when going by Van's. Jesse Saint I-TEC, Inc. jesse@itecusa.org www.itecusa.org www.mavericklsa.com C: 352-427-0285 O: 352-465-4545 F: 815-377-3694 Sent from my iPhone On Mar 1, 2011, at 7:34 PM, Don McDonald wrote: I plan to be there in our RV... but it's the land base one. Leaving the 10 at home. Will look for you. Don McDonald _____ From: greghale Sent: Tue, March 1, 2011 5:46:39 PM Subject: RV10-List: sun n fun ghale5224@aol.com> Just wandering if anybody is going to be a Sun N Fun this year. I plan to take the -10 and will be there the 29-31. Greg... -------- Greg Hale rv10 -- N210KH www.nwacaptain.com Read this topic online here: http://forums.matronics.com/viewtopic.php?p=332421#332421 ================================== ref="http://www.matronics.com/Navigator?RV10-List">http://www.matronics.com/ Navigator?RV10-List ================================== ums.matronics.com">http://forums.matronics.com ================================== http://www.matronics.com/contribution">http://www.matronics.com/contribution ================================== ________________________________ Message 10 ____________________________________ Time: 07:26:33 AM PST US From: "Ross Wendell" Subject: Re: RV10-List: Airworthiness Certificate Congrats! Sent via DROID on Verizon Wireless -----Original message----- From: Strasnuts Sent: Wed, Mar 2, 2011 14:26:28 GMT+00:00 Subject: RV10-List: Airworthiness Certificate After two years of building slow kit number 40936 I finally received my airworthiness certificate. Inspection went well even though I had my DAR and the FAA there. The FAA was there inspecting the DAR. I guess this happens twice a year and I was the lucky recipient. Five hours for the inspection. I had to cap off a couple wires I ran for future use and that was it. Pictures coming soon. -------- Cust. #40936 RV-10 SB Fuselage N801VR reserved Read this topic online here: http://forums.matronics.com/viewtopic.php?p=332478#332478 ________________________________ Message 11 ____________________________________ Time: 07:49:42 AM PST US From: John Jessen Subject: Re: RV10-List: Airworthiness Certificate Nice. Only two years and essentially no squeaks! Congratulations! ...via phone On Mar 2, 2011, at 6:26 AM, "Strasnuts" wrote: > > After two years of building slow kit number 40936 I finally received my airworthiness certificate. Inspection went well even though I had my DAR and the FAA there. The FAA was there inspecting the DAR. I guess this happens twice a year and I was the lucky recipient. Five hours for the inspection. I had to cap off a couple wires I ran for future use and that was it. Pictures coming soon. > > -------- > Cust. #40936 > RV-10 SB Fuselage > N801VR reserved > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=332478#332478 > > > > > > > > > > ________________________________ Message 12 ____________________________________ Time: 07:54:56 AM PST US From: "John J" Subject: RE: RV10-List: Airworthiness Certificate Squawks! Just love this autocorrect function. ...via phone -----Original Message----- From: John Jessen [mailto:n212pj@gmail.com] Sent: Wednesday, March 02, 2011 7:46 AM Subject: Re: RV10-List: Airworthiness Certificate Nice. Only two years and essentially no squeaks! Congratulations! ...via phone On Mar 2, 2011, at 6:26 AM, "Strasnuts" wrote: > > After two years of building slow kit number 40936 I finally received my airworthiness certificate. Inspection went well even though I had my DAR and the FAA there. The FAA was there inspecting the DAR. I guess this happens twice a year and I was the lucky recipient. Five hours for the inspection. I had to cap off a couple wires I ran for future use and that was it. Pictures coming soon. > > -------- > Cust. #40936 > RV-10 SB Fuselage > N801VR reserved > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=332478#332478 > > > > > > > > > > ________________________________ Message 13 ____________________________________ Time: 08:46:39 AM PST US From: Deems Davis Subject: Re: RV10-List: Airworthiness Certificate Nice job Whistler ! Way to go ! Deems On 3/2/2011 7:26 AM, Strasnuts wrote: > --> RV10-List message posted by: "Strasnuts" > > After two years of building slow kit number 40936 I finally received my airworthiness certificate. Inspection went well even though I had my DAR and the FAA there. The FAA was there inspecting the DAR. I guess this happens twice a year and I was the lucky recipient. Five hours for the inspection. I had to cap off a couple wires I ran for future use and that was it. Pictures coming soon. > > -------- > Cust. #40936 > RV-10 SB Fuselage > N801VR reserved > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=332478#332478 > > -- Deems Davis ________________________________ Message 14 ____________________________________ Time: 09:22:09 AM PST US From: Robin Marks Subject: RE: RV10-List: Airworthiness Certificate RV10-List: Airworthiness Certificate Two years is really fast to build a standard 10 kit but then I realized bot h Strasnuts & Seano were building together so apparently you had plenty of help! Great work. You have made a beautiful plane. As a point of personal privilege we were also signed off yesterday for the 8A. The difference was about a 30 minute inspection followed by an hour of paperwork and hangar flying. I think the inspection went quickly because th e DAR had inspected 3 of our other RV=92s. The down side is a 40 hour fly-of f because of the P-Mag. Darn I had another Mag on the shelf. The other bummer is we received the typical 25 mile area but because we are situated near th e state line that we cannot cross we essentially have half the flight area. Robin Do Not Archive *From:* owner-rv10-list-server@matronics.com [mailto: owner-rv10-list-server@matronics.com] *On Behalf Of *Strasnuts *Sent:* Wednesday, March 02, 2011 6:26 AM *To:* rv10-list@matronics.com *Subject:* RV10-List: Airworthiness Certificate After two years of building slow kit number 40936 I finally received my airworthiness certificate. Inspection went well even though I had my DAR and the FAA there. The FAA was there inspecting the DAR. I guess this happens twice a year and I was the lucky recipient. Five hours for the inspection. I had to cap off a couple wires I ran for future use and that was it. Pictures coming soon. -------- Cust. #40936 RV-10 SB Fuselage N801VR reserved Read this topic online here: http://forums.matronics.com/viewtopic.php?p=332478#332478 ------------------------------ No virus found in this message. Checked by AVG - www.avg.com ________________________________ Message 15 ____________________________________ Time: 09:39:39 AM PST US From: Jeff Carpenter Subject: Re: RV10-List: Airworthiness Certificate Congrats Sean... Jeff Carpenter 40304... keeping the dream alive (just barely) On Mar 2, 2011, at 6:26 AM, Strasnuts wrote: > > After two years of building slow kit number 40936 I finally received > my airworthiness certificate. Inspection went well even though I > had my DAR and the FAA there. The FAA was there inspecting the > DAR. I guess this happens twice a year and I was the lucky > recipient. Five hours for the inspection. I had to cap off a > couple wires I ran for future use and that was it. Pictures coming > soon. > > -------- > Cust. #40936 > RV-10 SB Fuselage > N801VR reserved > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=332478#332478 > > ________________________________ Message 16 ____________________________________ Time: 09:40:37 AM PST US Subject: Re: RV10-List: Airworthiness Certificate From: Seano Thanks Robin, You were much faster with your 8 weren't you! Strasnuts was a big help. He is sooo smart, handsome too! I forgot to mention I received the 25 hour fly off. :) Sent from my iPhone On Mar 2, 2011, at 10:10, Robin Marks wrote: > Two years is really fast to build a standard 10 kit but then I realized bo th Strasnuts & Seano were building together so apparently you had plenty of h elp! > > Great work. You have made a beautiful plane. > > As a point of personal privilege we were also signed off yesterday for the 8A. The difference was about a 30 minute inspection followed by an hour of p aperwork and hangar flying. I think the inspection went quickly because the D AR had inspected 3 of our other RV=99s. The down side is a 40 hour fl y-off because of the P-Mag. Darn I had another Mag on the shelf. The other b ummer is we received the typical 25 mile area but because we are situated ne ar the state line that we cannot cross we essentially have half the flight a rea. > > > > Robin > > Do Not Archive > > > > From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@ matronics.com] On Behalf Of Strasnuts > Sent: Wednesday, March 02, 2011 6:26 AM > To: rv10-list@matronics.com > Subject: RV10-List: Airworthiness Certificate > > > > > After two years of building slow kit number 40936 I finally received my ai rworthiness certificate. Inspection went well even though I had my DAR and t he FAA there. The FAA was there inspecting the DAR. I guess this happens t wice a year and I was the lucky recipient. Five hours for the inspection. I had to cap off a couple wires I ran for future use and that was it. Pictur es coming soon. > > -------- > Cust. #40936 > RV-10 SB Fuselage > N801VR reserved > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=332478#332478 > as List Un/Subscription, > //www.matronics.com/Navigator?RV10-List">http://www.matronics.com/Navigato r?RV10-List > ttp://forums.matronics.com">http://forums.matronics.com > -Matt Dralle, List Admin. > ======================= > > > > No virus found in this message. > Checked by AVG - www.avg.com > Version: 10.0.120 > > > ========================== ========= ========================== ========= ========================== ========= ========================== ========= > ________________________________ Message 17 ____________________________________ Time: 10:46:28 AM PST US Subject: Re: RV10-List: Airworthiness Certificate From: "Byron" Great to hear! Makes my 5 year build sound a lot longer. Anxious to hear about the first flight. Byron N253RV Phase 1 ------Original Message------ From: Strasnuts Sender: owner-rv10-list-server@matronics.com ReplyTo: rv10-list@matronics.com Subject: RV10-List: Airworthiness Certificate Sent: Mar 2, 2011 9:26 AM After two years of building slow kit number 40936 I finally received my airworthiness certificate. Inspection went well even though I had my DAR and the FAA there. The FAA was there inspecting the DAR. I guess this happens twice a year and I was the lucky recipient. Five hours for the inspection. I had to cap off a couple wires I ran for future use and that was it. Pictures coming soon. -------- Cust. #40936 RV-10 SB Fuselage N801VR reserved Read this topic online here: http://forums.matronics.com/viewtopic.php?p=332478#332478 Sent from my Verizon Wireless BlackBerry ________________________________ Message 18 ____________________________________ Time: 11:43:27 AM PST US From: Robin Marks Subject: RE: RV10-List: Airworthiness Certificate I purchased the 8A partially built with the engine hung as another builder abandoned the project. Something about a irreconcilable differences. We still had to back track a fair amount to do things our way but it definitel y was a leg up. That and Stein=92s magic plus no doors and heck they almost build themselves. Congratulations on the 25 hour fly off. Good news all the way around. Robin Do Not archive *From:* owner-rv10-list-server@matronics.com [mailto: owner-rv10-list-server@matronics.com] *On Behalf Of *Seano *Sent:* Wednesday, March 02, 2011 9:38 AM *To:* rv10-list@matronics.com *Subject:* Re: RV10-List: Airworthiness Certificate Thanks Robin, You were much faster with your 8 weren't you! Strasnuts was a big help. He is sooo smart, handsome too! I forgot to mention I received the 25 hour fly off. :) Sent from my iPhone On Mar 2, 2011, at 10:10, Robin Marks wrote: Two years is really fast to build a standard 10 kit but then I realized bot h Strasnuts & Seano were building together so apparently you had plenty of help! Great work. You have made a beautiful plane. As a point of personal privilege we were also signed off yesterday for the 8A. The difference was about a 30 minute inspection followed by an hour of paperwork and hangar flying. I think the inspection went quickly because th e DAR had inspected 3 of our other RV=92s. The down side is a 40 hour fly-of f because of the P-Mag. Darn I had another Mag on the shelf. The other bummer is we received the typical 25 mile area but because we are situated near th e state line that we cannot cross we essentially have half the flight area. Robin Do Not Archive *From:* owner-rv10-list-server@matronics.com [mailto: owner-rv10-list-server@matronics.com] *On Behalf Of *Strasnuts *Sent:* Wednesday, March 02, 2011 6:26 AM *To:* rv10-list@matronics.com *Subject:* RV10-List: Airworthiness Certificate After two years of building slow kit number 40936 I finally received my airworthiness certificate. Inspection went well even though I had my DAR and the FAA there. The FAA was there inspecting the DAR. I guess this happens twice a year and I was the lucky recipient. Five hours for the inspection. I had to cap off a couple wires I ran for future use and that was it. Pictures coming soon. -------- Cust. #40936 RV-10 SB Fuselage N801VR reserved Read this topic online here: http://forums.matronics.com/viewtopic.php?p=332478#332478 as List Un/Subscription, //www.matronics.com/Navigator?RV10-List"> http://www.matronics.com/Navigator?RV10-List ttp://forums.matronics.com">http://forums.matronics.com -Matt Dralle, List Admin. ======================= ------------------------------ No virus found in this message. Checked by AVG - www.avg.com Version: 10.0.120 * * * * *======================== ===========* *ref="http://www.matronics.com/Navigator?RV10-List">http://www.matronics. com/Navigator?RV10-List* *======================== ===========* *ums.matronics.com">http://forums.matronics.com* *======================== ===========* *http://www.matronics.com/contribution">http://www.matronics.com/contributi on* *======================== ===========* * * * * * * ===========* ===========* ===========* ===========* * * ------------------------------ No virus found in this message. Checked by AVG - www.avg.com ________________________________ Message 19 ____________________________________ Time: 01:18:11 PM PST US From: Scott Schmidt Subject: Re: RV10-List: Airworthiness Certificate Sean did a great job and had amazing discipline to work on the plane. It will be fun to watch it fly for the first time. -Scott Sent from my iPhone On Mar 2, 2011, at 7:26 AM, "Strasnuts" wrote: > > After two years of building slow kit number 40936 I finally received my airworthiness certificate. Inspection went well even though I had my DAR and the FAA there. The FAA was there inspecting the DAR. I guess this happens twice a year and I was the lucky recipient. Five hours for the inspection. I had to cap off a couple wires I ran for future use and that was it. Pictures coming soon. > > -------- > Cust. #40936 > RV-10 SB Fuselage > N801VR reserved > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=332478#332478 > > > > > > > > > > ________________________________ Message 20 ____________________________________ Time: 01:31:41 PM PST US Subject: Re: RV10-List: Airworthiness Certificate From: Seano I've got so much to do at home now I may just keep flying into the sunset on that first flight. Can I get to Mexico on one tank? I guess that's not in my phase 1 area. Sent from my iPhone On Mar 2, 2011, at 14:13, Scott Schmidt wrote: > > Sean did a great job and had amazing discipline to work on the plane. > > It will be fun to watch it fly for the first time. > > -Scott > > Sent from my iPhone > > On Mar 2, 2011, at 7:26 AM, "Strasnuts" wrote: > >> >> After two years of building slow kit number 40936 I finally received my airworthiness certificate. Inspection went well even though I had my DAR and the FAA there. The FAA was there inspecting the DAR. I guess this happens twice a year and I was the lucky recipient. Five hours for the inspection. I had to cap off a couple wires I ran for future use and that was it. Pictures coming soon. >> >> -------- >> Cust. #40936 >> RV-10 SB Fuselage >> N801VR reserved >> >> >> >> >> Read this topic online here: >> >> http://forums.matronics.com/viewtopic.php?p=332478#332478 >> >> >> >> >> >> >> >> >> >> > > > > > ________________________________ Message 21 ____________________________________ Time: 03:03:49 PM PST US From: Linn Walters Subject: RE: RV10-List: Airworthiness Certificate First I'd heard of the state line thingy. Was that spelled out in the paperwork??? Where did that come from??? Linn On 3/2/2011 12:10 PM, Robin Marks wrote: > > Two years is really fast to build a standard 10 kit but then I > realized both Strasnuts & Seano were building together so apparently > you had plenty of help! > > Great work. You have made a beautiful plane. > > As a point of personal privilege we were also signed off yesterday for > the 8A. The difference was about a 30 minute inspection followed by an > hour of paperwork and hangar flying. I think the inspection went > quickly because the DAR had inspected 3 of our other RV=92s. The down > side is a 40 hour fly-off because of the P-Mag. Darn I had another Mag > on the shelf. The other bummer is we received the typical 25 mile area > but because we are situated near the state line that we cannot cross > we essentially have half the flight area. > > Robin > > Do Not Archive > > *From:*owner-rv10-list-server@matronics.com > > [mailto:owner-rv10-list-server@matronics.com > ] *On Behalf Of *Strasnuts > *Sent:* Wednesday, March 02, 2011 6:26 AM > *To:* rv10-list@matronics.com > *Subject:* RV10-List: Airworthiness Certificate > > > > > After two years of building slow kit number 40936 I finally received > my airworthiness certificate. Inspection went well even though I had > my DAR and the FAA there. The FAA was there inspecting the DAR. I > guess this happens twice a year and I was the lucky recipient. Five > hours for the inspection. I had to cap off a couple wires I ran for > future use and that was it. Pictures coming soon. > > -------- > Cust. #40936 > RV-10 SB Fuselage > N801VR reserved > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=332478#332478 > as List Un/Subscription, > //www.matronics.com/Navigator?RV10-List">http://www.matronics.com/Navig ator?RV10-List > ttp://forums.matronics.com">http://forums.matronics.com > -Matt Dralle, List Admin. > ======================== > > > ----------------------------------------------------------------------- - > > No virus found in this message. > Checked by AVG - www.avg.com > Version: 10.0.120 > > * > =========== =========== =========== =========== > > * ________________________________ Message 22 ____________________________________ Time: 03:42:46 PM PST US From: Phil Barnette Subject: Re: RV10-List: Airworthiness Certificate ...and so humble!! Hee Hee I can sure attest to this plane being a work of heart. Had opportunity to lo ok at it during the frantic lead up to inspection. Strong, strong work! Phil Barnette Salt Lake City Sent from my iPhone On Mar 2, 2011, at 10:37 AM, Seano wrote: > Thanks Robin, > You were much faster with your 8 weren't you! > > Strasnuts was a big help. He is sooo smart, handsome too! > > I forgot to mention I received the 25 hour fly off. :) > > > Sent from my iPhone > ________________________________ Message 23 ____________________________________ Time: 04:29:35 PM PST US From: Robin Marks Subject: RE: RV10-List: Airworthiness Certificate RV10-List: Airworthiness Certificate We had to comply for 3 other RV=92s so we didn=92t really bother to ask thi s time. Sorry no additional detail. Robin *From:* owner-rv10-list-server@matronics.com [mailto: owner-rv10-list-server@matronics.com] *On Behalf Of *Linn Walters *Sent:* Wednesday, March 02, 2011 2:58 PM *To:* rv10-list@matronics.com *Subject:* RE: RV10-List: Airworthiness Certificate First I'd heard of the state line thingy. Was that spelled out in the paperwork??? Where did that come from??? Linn On 3/2/2011 12:10 PM, Robin Marks wrote: Two years is really fast to build a standard 10 kit but then I realized bot h Strasnuts & Seano were building together so apparently you had plenty of help! Great work. You have made a beautiful plane. As a point of personal privilege we were also signed off yesterday for the 8A. The difference was about a 30 minute inspection followed by an hour of paperwork and hangar flying. I think the inspection went quickly because th e DAR had inspected 3 of our other RV=92s. The down side is a 40 hour fly-of f because of the P-Mag. Darn I had another Mag on the shelf. The other bummer is we received the typical 25 mile area but because we are situated near th e state line that we cannot cross we essentially have half the flight area. Robin Do Not Archive *From:* owner-rv10-list-server@matronics.com [mailto: owner-rv10-list-server@matronics.com] *On Behalf Of *Strasnuts *Sent:* Wednesday, March 02, 2011 6:26 AM *To:* rv10-list@matronics.com *Subject:* RV10-List: Airworthiness Certificate After two years of building slow kit number 40936 I finally received my airworthiness certificate. Inspection went well even though I had my DAR and the FAA there. The FAA was there inspecting the DAR. I guess this happens twice a year and I was the lucky recipient. Five hours for the inspection. I had to cap off a couple wires I ran for future use and that was it. Pictures coming soon. -------- Cust. #40936 RV-10 SB Fuselage N801VR reserved Read this topic online here: http://forums.matronics.com/viewtopic.php?p=332478#332478 as List Un/Subscription, //www.matronics.com/Navigator?RV10-List"> http://www.matronics.com/Navigator?RV10-List ttp://forums.matronics.com">http://forums.matronics.com -Matt Dralle, List Admin. ======================= ------------------------------ No virus found in this message. Checked by AVG - www.avg.com Version: 10.0.120 * * * * *om/Navigator?RV10-List">http://www.matronics.com/Navigator?RV10-List* *s.com">http://forums.matronics.com* *om/contribution">http://www.matronics.com/contribution* * * * * * * ===========* ===========* ===========* ===========* * * ------------------------------ No virus found in this message. Checked by AVG - www.avg.com ________________________________ Message 24 ____________________________________ Time: 04:39:52 PM PST US Subject: RV10-List: Re: sun n fun From: "ivankris" Yes I am going to be there as well in my newly painted airplane, Mar 29-31. The plan is for me to meet up with Geoff and go together from his place in Ohio. -------- Ivan K. www.ivankristensen.com Builder # 40838 Flying (90 hrs.) C-GMDV Read this topic online here: http://forums.matronics.com/viewtopic.php?p=332570#332570 ________________________________ Message 25 ____________________________________ Time: 04:51:45 PM PST US From: Phil Barnette Subject: Re: RV10-List: Airworthiness Certificate Or work of art- as case may be. Damn grammar checker... Sent from my iPhone On Mar 2, 2011, at 4:35 PM, Phil Barnette wrote: > ...and so humble!! Hee Hee > > I can sure attest to this plane being a work of heart. Had opportunity to l ook at it during the frantic lead up to inspection. > > Strong, strong work! > > Phil Barnette > Salt Lake City > > Sent from my iPhone > > On Mar 2, 2011, at 10:37 AM, Seano wrote: > >> Thanks Robin, >> You were much faster with your 8 weren't you! >> >> Strasnuts was a big help. He is sooo smart, handsome too! >> >> I forgot to mention I received the 25 hour fly off. :) >> >> >> Sent from my iPhone >> > > ========================== ========= ========================== ========= ========================== ========= ========================== ========= > ________________________________ Message 26 ____________________________________ Time: 05:51:23 PM PST US Subject: Re: RV10-List: Airworthiness Certificate From: Seano The whole build was frantic! It was sure nice having Scott's sweet plane next to me to reference. I can't imagine building one of the early ones without this huge support gro up Sent from my iPhone > ________________________________ Message 27 ____________________________________ Time: 07:48:02 PM PST US From: David Leikam Subject: Re: RV10-List: Airworthiness Certificate Make that two in one day. I got my blessing at about 7pm this evening. Just waiting for a calm day now. Congrads to you Sean and may you have an uneventful first flight. David Leikam RV10 N89DA On Mar 2, 2011, at 7:48 PM, Seano wrote: > The whole build was frantic! > It was sure nice having Scott's sweet plane next to me to reference. > I can't imagine building one of the early ones without this huge support group > > Sent from my iPhone >> > > > 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D > 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D > 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D > 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D > ________________________________ Message 28 ____________________________________ Time: 08:58:32 PM PST US Subject: RV10-List: FS: Nearly Completed RV-10 Project (DFW) From: "2eyedocs" <2eyedocs@gmail.com> Excellent workmanship throughout with professional assistance from an A&P. Kit includes many extras including new Hartzell Constant Speed 2 blade metal Prop, new Vetterman exhaust for Lycoming IO-540, all Position Lights and Strobes, Antennas, Safety-Trim speed sensitive controller, FWF kit with Throttle Quadrant, etc., etc. Metal work completed including Controls (Yoke, Ailerons, Elevator, Rudder, etc.), Fuel tanks, Fuel Lines, Gear, Brakes and Brake Lines and kit Interior. Most Fiberglass work completed including Cabin top mated to fuse, Doors installed and fitted, Wing Tips, Rudder Tip, etc. Wiring to wings and fuse completed to Wing Tip Lighting, AP servos, Heated Pitot, etc. Wheel Pants and Gear Fairing are not competed. Heated Pitot installed and plumbed, Static Ports installed and currently working on static plumbing to the panel. You will have personal choice on buying Avionics, Engine and Interior Finish-Out. Excellent Opportunity!! Get a major head start towards First Flight with a wonderful aircraft for close to the price of parts. Asking $79,000, willing to negotiate. Contact Mark at 2eyedocs@gmail.com or 817-915-7294. Some pics may be seen at: https://picasaweb.google.com/2eyedocs/RV10Build# Partial Inventory List Attached: Read this topic online here: http://forums.matronics.com/viewtopic.php?p=332592#332592 Attachments: http://forums.matronics.com//files/rv_10__kit_inventory_list_148.pdf ________________________________ Message 29 ____________________________________ Time: 09:31:58 PM PST US From: Rick Lark Subject: Re: RV10-List: Airworthiness Certificate Wow Sean, congrats on the C of A.- I'm #40956 and I'm working on the wing s.- Can't imagine how you accomplished your build so fast.- Well done.. .......Rick --- On Wed, 3/2/11, Strasnuts wrote: From: Strasnuts Subject: RV10-List: Airworthiness Certificate Received: Wednesday, March 2, 2011, 2:26 PM After two years of building slow kit number 40936 I finally received my air worthiness certificate.- Inspection went well even though I had my DAR an d the FAA there.- The FAA was there inspecting the DAR.- I guess this h appens twice a year and I was the lucky recipient.- Five hours for the in spection.- I had to cap off a couple wires I ran for future use and that was it.- Pictures coming soon. -------- Cust. #40936 RV-10 SB Fuselage N801VR reserved Read this topic online here: http://forums.matronics.com/viewtopic.php?p=332478#332478 le, List Admin. =0A=0A ________________________________ Message 30 ____________________________________ Time: 09:43:08 PM PST US From: Rick Lark Subject: Re: RV10-List: Airworthiness Certificate Well done as well David.- What's your build #? - Rick #40956 (slow...slow.... build) --- On Thu, 3/3/11, David Leikam wrote: From: David Leikam Subject: Re: RV10-List: Airworthiness Certificate Received: Thursday, March 3, 2011, 3:44 AM Make that two in one day. -I got my blessing at about 7pm this evening. -Just waiting for a calm day now. Congrads to you Sean and may you have an uneventful first flight. David Leikam RV10- N89DA On Mar 2, 2011, at 7:48 PM, Seano wrote: The whole build was frantic! - It was sure nice having Scott's sweet plane next to me to reference.- I can't imagine building one of the early ones without this huge support gr oup- Sent from my iPhone 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D href="x-msg://534/3D%22http://www.matronics.com/Navigator?RV10-List%22">h ttp://www.matronics.com/Navigator?RV10-List 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D href="x-msg://534/3D%22http://forums.matronics.com%22">http://forums.matr onics.com 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D href="x-msg://534/3D%22http://www.matronics.com/contribution%22">http://w ww.matronics.com/contribution 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D =0A=0A ________________________________ Message 31 ____________________________________ Time: 10:04:37 PM PST US From: Robin Marks Subject: RE: RV10-List: Airworthiness Certificate Way to go David. I am sure your build to top drawer too! Send photos / vide o of your first flight. I started flying RV=92s not that long ago when there were ~2,500 on Van=92s Hobbs Meter. 3 days ago it was 7,200. It=92s now 7,206. Amazing. Robin Do Not Archive *From:* owner-rv10-list-server@matronics.com [mailto: owner-rv10-list-server@matronics.com] *On Behalf Of *David Leikam *Sent:* Wednesday, March 02, 2011 7:44 PM *To:* rv10-list@matronics.com *Subject:* Re: RV10-List: Airworthiness Certificate Make that two in one day. I got my blessing at about 7pm this evening. Just waiting for a calm day now. Congrads to you Sean and may you have an uneventful first flight. David Leikam RV10 N89DA On Mar 2, 2011, at 7:48 PM, Seano wrote: The whole build was frantic! It was sure nice having Scott's sweet plane next to me to reference. I can't imagine building one of the early ones without this huge support group Sent from my iPhone * * * * * * *3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D* *href="x-msg://534/3D%22http://www.matronics.com/Navigator?RV10-List%22"> http://www.matronics.com/Navigator?RV10-List* *3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D* *href="x-msg://534/3D%22http://forums.matronics.com%22">http://forums.mat ronics.com* *3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D* *href="x-msg://534/3D%22http://www.matronics.com/contribution%22">http:// www.matronics.com/contribution* *3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D* * * * * * * ===========* ===========* ===========* ===========* * * ------------------------------ No virus found in this message. Checked by AVG - www.avg.com ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message rv10-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/RV10-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/rv10-list Browse Digests http://www.matronics.com/digest/rv10-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.