---------------------------------------------------------- RV10-List Digest Archive --- Total Messages Posted Fri 06/03/11: 6 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 08:09 AM - Re: Nose Wheel Noise (Lew Gallagher) 2. 03:49 PM - fuel pressure sender VDO360003 (DLM) 3. 07:13 PM - Re: fuel pressure sender VDO360003 (dmaib@me.com) 4. 07:47 PM - Re: Re: fuel pressure sender VDO360003 (DLM) 5. 08:45 PM - Re: Re: fuel pressure sender VDO360003 (DLM) 6. 11:14 PM - Re: Quick Build fuselage (landing gear fittings) (dhmoose) ________________________________ Message 1 _____________________________________ Time: 08:09:31 AM PST US From: "Lew Gallagher" Subject: Re: RV10-List: Nose Wheel Noise Hey Mike, I would suspect the big washers that sit on top of the fork. Others have said that when they wear in, the left right torq needs to be reset, so I went ahead and polished the mating surfaces and greased them before installing on Wes's plane and setting the torq -- haven't had any squeak but still checked and reset torq after about a year of flying. Later, - Lew ----- Original Message ----- From: "Michael Kraus" Sent: Thursday, June 02, 2011 10:43 PM Subject: RV10-List: Nose Wheel Noise > > > Does anyone else's nose wheel make noise when steering (left and right > motion, not rotary motion). I have greased it thru the zerk fitting and > tried a few other things which help, but only for a short time. Are > others seeing this? Any ideas how to fix? My next step is a full > disassembly and re- grease it all up..... > > Thanks > -Mike Kraus ________________________________ Message 2 _____________________________________ Time: 03:49:35 PM PST US From: "DLM" Subject: RV10-List: fuel pressure sender VDO360003 Has any one had one of these fail? usual install is with GRT EIS 6000. When it fails, does it sense zero for high scale? mine has become flaky with a few occasions of slightly high pressure followed by a duration of flight normal range. I have the replacement in the spare parts box in the baggage area but waiting to install. Total time is 429. ________________________________ Message 3 _____________________________________ Time: 07:13:35 PM PST US Subject: RV10-List: Re: fuel pressure sender VDO360003 From: "dmaib@me.com" I am at home and can't confirm the part number, but I recently replaced my fuel pressure sender for the second time after about 370 hours. The first one started acting flaky at about 170 hours. Both times the symptoms were occasional spikes of very high fuel pressure. GRT tells me this is common and sent me a replacement right away, both times. Changing the sender takes about five minutes and does not require "breaking" any fuel lines if installed using the stock Van's manifold. I don't remember the cost, but seem to remember it was in the $40 range. Maybe less. -------- David Maib RV-10 #40559 Read this topic online here: http://forums.matronics.com/viewtopic.php?p=341996#341996 ________________________________ Message 4 _____________________________________ Time: 07:47:10 PM PST US From: "DLM" Subject: Re: RV10-List: Re: fuel pressure sender VDO360003 Sounds like mine; we will see how long it goes. The part number is available online for about $29 shipped. It is a German part distributed in USA by JEGS a car "extras" site. ----- Original Message ----- From: Sent: Friday, June 03, 2011 7:07 PM Subject: RV10-List: Re: fuel pressure sender VDO360003 > > I am at home and can't confirm the part number, but I recently replaced my > fuel pressure sender for the second time after about 370 hours. The first > one started acting flaky at about 170 hours. Both times the symptoms were > occasional spikes of very high fuel pressure. GRT tells me this is common > and sent me a replacement right away, both times. Changing the sender > takes about five minutes and does not require "breaking" any fuel lines if > installed using the stock Van's manifold. > I don't remember the cost, but seem to remember it was in the $40 range. > Maybe less. > > -------- > David Maib > RV-10 #40559 > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=341996#341996 > > > ________________________________ Message 5 _____________________________________ Time: 08:45:00 PM PST US From: "DLM" Subject: Re: RV10-List: Re: fuel pressure sender VDO360003 http://www.summitracing.com/parts/VDO-360003/ also. ----- Original Message ----- From: "DLM" Sent: Friday, June 03, 2011 7:43 PM Subject: Re: RV10-List: Re: fuel pressure sender VDO360003 > > Sounds like mine; we will see how long it goes. The part number is > available online for about $29 shipped. It is a German part distributed in > USA by JEGS a car "extras" site. > ----- Original Message ----- > From: > To: > Sent: Friday, June 03, 2011 7:07 PM > Subject: RV10-List: Re: fuel pressure sender VDO360003 > > >> >> I am at home and can't confirm the part number, but I recently replaced >> my fuel pressure sender for the second time after about 370 hours. The >> first one started acting flaky at about 170 hours. Both times the >> symptoms were occasional spikes of very high fuel pressure. GRT tells me >> this is common and sent me a replacement right away, both times. Changing >> the sender takes about five minutes and does not require "breaking" any >> fuel lines if installed using the stock Van's manifold. >> I don't remember the cost, but seem to remember it was in the $40 range. >> Maybe less. >> >> -------- >> David Maib >> RV-10 #40559 >> >> >> >> >> Read this topic online here: >> >> http://forums.matronics.com/viewtopic.php?p=341996#341996 >> >> >> >> >> >> >> >> >> >> > > > ________________________________ Message 6 _____________________________________ Time: 11:14:26 PM PST US Subject: RV10-List: Re: Quick Build fuselage (landing gear fittings) From: "dhmoose" Dave, Thanks for the pictures. It's always nice to get the visual! Today, it was front floors but the baggage/rear floors are around the corner. I'm excited to get to the conduit. Thanks again, David -------- David Halmos RV-10 builder #41059 Empennage complete! QB fuselage under construction Read this topic online here: http://forums.matronics.com/viewtopic.php?p=342019#342019 ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message rv10-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/RV10-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/rv10-list Browse Digests http://www.matronics.com/digest/rv10-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.