---------------------------------------------------------- RV10-List Digest Archive --- Total Messages Posted Sat 07/16/11: 7 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 03:08 AM - Re: Spacers under windows (Rodger Todd) 2. 07:36 PM - Cleaning Cannulas (n277dl) 3. 07:49 PM - Re: Cleaning Cannulas (Kelly McMullen) 4. 08:08 PM - Re: Cleaning Cannulas (Robin Marks) 5. 08:47 PM - Re: Cleaning Cannulas (Rene) 6. 09:14 PM - OSH camping (DLM) 7. 09:18 PM - OSH camping (DLM) ________________________________ Message 1 _____________________________________ Time: 03:08:01 AM PST US From: Rodger Todd Subject: Re: RV10-List: Spacers under windows Geoff, - Where can we overseas types get Lord adhesives; their website doesn't provi de that info? - Many thanks, - Rodger In storm cast Oz --- On Fri, 15/7/11, g.combs wrote: From: g.combs Subject: Re: RV10-List: Spacers under windows Phil acetone is very bad for acrylic. I would avoid the Weld on and use Lord -urethane adhesive. Stronger than Weld on and you get a longer cure time And you can clean the oozing off with Enamel reducer. Ppg dt 870 is what I used. Will not hurt the acrylic Geoff Sent from my iPhone Geoff On Jul 15, 2011, at 11:59 AM, Phillip Perry wrote: Thanks for the feedback.- One last question. What can I use to wipe off wet Weld-on?- I'm thinking I'll wipe the oozin g off with acetone on the interior and exterior sides. Is there something that works better? Phil On Thu, Jul 14, 2011 at 2:36 PM, Pascal wrote: The purpose of the spacers is to fill a gap. Sounds like that is not your i ssue. Leave it I say! - - From: Phillip Perry Sent: Thursday, July 14, 2011 8:55 AM Subject: Re: RV10-List: Spacers under windows - I guess everyone used spacers - huh?? :) On Wed, Jul 13, 2011 at 10:10 PM, Phil Perry wrote: Life got in the way for a bit but I'm back on track building and airplane a gain....... Curious to know how many people installed washers under their plexiglas at the time they were installed.- Mine sit proud enough as it is and I'd rea lly prefer not to use them if possible.- Any results from those who didn' t use them and how long have you been flying? Hope to catch some of you at Osh this year.... Phil arget="_blank">http://www.matronics.com/Navigator?RV10-List http://forums.matronics.com le, List Admin. ="_blank">http://www.matronics.com/contribution href="http://www.matronics.com/Navigator?RV10-List">http://www.matronics. com/Navigator?RV10-List href="http://forums.matronics.com">http://forums.matronics.com href="http://www.matronics.com/contribution">http://www.matronics.com/c get="_blank">http://www.matronics.com/Navigator?RV10-List tp://forums.matronics.com _blank">http://www.matronics.com/contribution 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D ________________________________ Message 2 _____________________________________ Time: 07:36:22 PM PST US Subject: RV10-List: Cleaning Cannulas From: "n277dl" For those of you that regularly use O2, how do you clean the cannulas? I purchased a portable Aerox system for the 7A 4-5 years ago when my son flew it out to Las Vagas but I have never used it. I'm thinking of giving the O2 a try in the -10 to see how well my wife and I can tolerate the cannulas and they need a good cleaning before we give O2 a try. Doug 180 hrs in year one. What a great plane! -------- Doug "Fools" are always more creative than process people and will always find ways to ruin a perfectly good set of processes. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=346717#346717 ________________________________ Message 3 _____________________________________ Time: 07:49:24 PM PST US Subject: Re: RV10-List: Cleaning Cannulas From: Kelly McMullen I use 91% isopropyl alcohol. Would use pure if there was a handy source. Just good rub down with the alcohol with cotton swab or paper towel. Qtip would probably be best. On Sat, Jul 16, 2011 at 7:33 PM, n277dl wrote: > > For those of you that regularly use O2, how do you clean the cannulas? > > I purchased a portable Aerox system for the 7A 4-5 years ago when my son > flew it out to Las Vagas but I have never used it. > > I'm thinking of giving the O2 a try in the -10 to see how well my wife and > I can tolerate the cannulas and they need a good cleaning before we give O2 > a try. > > Doug > > 180 hrs in year one. What a great plane! > > -------- > Doug > "Fools" are always more creative than process people and will always find > ways to ruin a perfectly good set of processes. > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=346717#346717 > > ________________________________ Message 4 _____________________________________ Time: 08:08:20 PM PST US From: Robin Marks Subject: Re: RV10-List: Cleaning Cannulas I have been on O2 11 hours in the last 2 days. Really helps with freshness and alertness. 13,500 CA to Atlanta and beyond. Robin Sent from my iPad2. On Jul 16, 2011, at 10:55 PM, Kelly McMullen wrote: I use 91% isopropyl alcohol. Would use pure if there was a handy source. Just good rub down with the alcohol with cotton swab or paper towel. Qtip would probably be best. On Sat, Jul 16, 2011 at 7:33 PM, n277dl wrote: > > For those of you that regularly use O2, how do you clean the cannulas? > > I purchased a portable Aerox system for the 7A 4-5 years ago when my son > flew it out to Las Vagas but I have never used it. > > I'm thinking of giving the O2 a try in the -10 to see how well my wife and > I can tolerate the cannulas and they need a good cleaning before we give O2 > a try. > > Doug > > 180 hrs in year one. What a great plane! > > -------- > Doug > "Fools" are always more creative than process people and will always find > ways to ruin a perfectly good set of processes. > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=346717#346717 > > > ========== > arget="_blank">http://www.matronics.com/Navigator?RV10-List > ========== > http://forums.matronics.com > ========== > le, List Admin. > ="_blank">http://www.matronics.com/contribution > ========== > > * * ________________________________ Message 5 _____________________________________ Time: 08:47:06 PM PST US From: "Rene" Subject: RE: RV10-List: Cleaning Cannulas When asked what the best thing in my airplane is......I say the O2 system. 12 hours on O2 in the past two weeks. I use alcohol swabs to clean them off.......but have ones assigned to the family and only clean the "spares" that other people use. Rene' 801-721-6080 -----Original Message----- From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of n277dl Sent: Saturday, July 16, 2011 8:33 PM Subject: RV10-List: Cleaning Cannulas For those of you that regularly use O2, how do you clean the cannulas? I purchased a portable Aerox system for the 7A 4-5 years ago when my son flew it out to Las Vagas but I have never used it. I'm thinking of giving the O2 a try in the -10 to see how well my wife and I can tolerate the cannulas and they need a good cleaning before we give O2 a try. Doug 180 hrs in year one. What a great plane! -------- Doug "Fools" are always more creative than process people and will always find ways to ruin a perfectly good set of processes. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=346717#346717 ________________________________ Message 6 _____________________________________ Time: 09:14:49 PM PST US From: "DLM" Subject: RV10-List: OSH camping Anyone in the RV10 area have room on your campsite for a 5 x 7 tent ? I just got an opportuniy to fly to OSH in a Grumman Albatross HU-16B arriving July 24-25 and departing July 31. Not certain of the ride yet. want to look at the aircraft and read about the type. ________________________________ Message 7 _____________________________________ Time: 09:18:36 PM PST US From: "DLM" Subject: RV10-List: OSH camping My 10 went to Arlington this year and is in the hangar awaiting the repaired Trutrak Digiflite VSGV. David N46007 ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message rv10-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/RV10-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/rv10-list Browse Digests http://www.matronics.com/digest/rv10-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.