---------------------------------------------------------- RV10-List Digest Archive --- Total Messages Posted Sun 07/17/11: 12 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 07:18 AM - Re: Spacers under windows (g.combs) 2. 10:04 AM - Re: Cleaning Cannulas (Jim Berry) 3. 01:23 PM - Re: Re: Cleaning Cannulas (John Gonzalez) 4. 02:26 PM - Circuit Diagram Software (John MacCallum) 5. 02:39 PM - Re: Cleaning Cannulas (Bob Turner) 6. 05:57 PM - Re: OSH camp conditions report (Ron B.) 7. 06:11 PM - Re: OSH camping (DLM) 8. 06:50 PM - Re: OSH camping (Robin Marks) 9. 07:31 PM - Re: OSH camping (DLM) 10. 07:40 PM - Second Ride In 7.5 Years (David Hertner) 11. 08:03 PM - Re: Re: OSH camp conditions report (Tim Olson) 12. 08:07 PM - Re: OSH camping (Bob Kaufmann) ________________________________ Message 1 _____________________________________ Time: 07:18:51 AM PST US Subject: Re: RV10-List: Spacers under windows From: "g.combs" Rodger I will check into this and let you know. Geoff Sent from my iPad On Jul 16, 2011, at 6:05 AM, Rodger Todd wrote: > Geoff, > > Where can we overseas types get Lord adhesives; their website doesn't prov ide that info? > > Many thanks, > > Rodger > In storm cast Oz > --- On Fri, 15/7/11, g.combs wrote: > > From: g.combs > Subject: Re: RV10-List: Spacers under windows > To: "rv10-list@matronics.com" > Date: Friday, 15 July, 2011, 20:02 > > Phil acetone is very bad for acrylic. > I would avoid the Weld on and use > Lord urethane adhesive. Stronger than > Weld on and you get a longer cure time > And you can clean the oozing off with > Enamel reducer. Ppg dt 870 is what > I used. Will not hurt the acrylic > Geoff > > Sent from my iPhone Geoff > > > On Jul 15, 2011, at 11:59 AM, Phillip Perry wrote: > >> Thanks for the feedback. One last question. >> >> What can I use to wipe off wet Weld-on? I'm thinking I'll wipe the oozin g off with acetone on the interior and exterior sides. >> >> Is there something that works better? >> >> Phil >> >> >> >> >> >> >> On Thu, Jul 14, 2011 at 2:36 PM, Pascal wrote: >> The purpose of the spacers is to fill a gap. Sounds like that is not your issue. Leave it I say! >> >> >> From: Phillip Perry >> Sent: Thursday, July 14, 2011 8:55 AM >> To: rv10-list@matronics.com >> Subject: Re: RV10-List: Spacers under windows >> >> I guess everyone used spacers - huh?? >> >> :) >> >> >> >> >> On Wed, Jul 13, 2011 at 10:10 PM, Phil Perry wrote : >> >> Life got in the way for a bit but I'm back on track building and airplane again....... >> >> Curious to know how many people installed washers under their plexiglas a t the time they were installed. Mine sit proud enough as it is and I'd real ly prefer not to use them if possible. Any results from those who didn't us e them and how long have you been flying? >> >> Hope to catch some of you at Osh this year.... >> >> Phil >> >> ========== >> arget="_blank">http://www.matronics.com/Navigator?RV10-List >> ========== >> http://forums.matronics.com >> ========== >> le, List Admin. >> ="_blank">http://www.matronics.com/contribution >> ========== >> >> >> >> >> >> >> href="http://www.matronics.com/Navigator?RV10-List">http://www.matronic s.com/Navigator?RV10-List >> href="http://forums.matronics.com">http://forums.matronics.com >> href="http://www.matronics.com/contribution">http://www.matronics.com/c >> >> >> get="_blank">http://www.matronics.com/Navigator?RV10-List >> tp://forums.matronics.com >> _blank">http://www.matronics.com/contribution >> >> >> >> >> > > > 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > List > 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > > > 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > > > ========================== ========= ========================== ========= ========================== ========= ========================== ========= > ________________________________ Message 2 _____________________________________ Time: 10:04:26 AM PST US Subject: RV10-List: Re: Cleaning Cannulas From: "Jim Berry" Unless you are sharing cannulas with someone who has Tb or HIV, alcohol is perfectly adequate. Jim Berry N15JB Read this topic online here: http://forums.matronics.com/viewtopic.php?p=346778#346778 ________________________________ Message 3 _____________________________________ Time: 01:23:53 PM PST US From: John Gonzalez Subject: RE: RV10-List: Re: Cleaning Cannulas Clorehexidine Peridex or Cidex would work well and can be purchased from a dental supply house. Use a Q-tip and a paper towel. With all cleaning methods=2C be careful that you do not get the solution be tween the thin ballon inside the rubber housing. If the ballon ends up stic king to the outside housing the ballon will not deflate when you inhale and you will not be getting the O2. Running nose=2C food=2C or Gatoraid will do the same thing causing it to stick to the housing. > Subject: RV10-List: Re: Cleaning Cannulas > From: jimberry@qwest.net > Date: Sun=2C 17 Jul 2011 10:01:24 -0700 > To: rv10-list@matronics.com > > > Unless you are sharing cannulas with someone who has Tb or HIV=2C alcohol is perfectly adequate. > > Jim Berry > N15JB > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=346778#346778 > > > > > > > =========== =========== =========== =========== > > > ________________________________ Message 4 _____________________________________ Time: 02:26:16 PM PST US From: "John MacCallum" Subject: RV10-List: Circuit Diagram Software G'day all, It's time for me to actually make up some circuit diagrams for my RV10. Can someone suggest a good software package that has The required symbols etc for Aeronautical use and doesn't cost the earth ? Cheers John MacCallum Builder # 41016 VH-DUU ________________________________ Message 5 _____________________________________ Time: 02:39:44 PM PST US Subject: RV10-List: Re: Cleaning Cannulas From: "Bob Turner" drug store alcohol. We have the Aerox cannulas too, and I can say you will love them. They are so non-intrusive that I frequently don't even both to take it off until after I've landed. My wife used to get headaches above 10,000'; just a few wiffs of oxygen and she is good as new. -------- Bob Turner RV-10 QB Read this topic online here: http://forums.matronics.com/viewtopic.php?p=346800#346800 ________________________________ Message 6 _____________________________________ Time: 05:57:39 PM PST US Subject: RV10-List: Re: OSH camp conditions report From: "Ron B." Tim Making plans for our first time flying into Oshkosh. We tried for Sun n Fun this spring but only made it to South Carolina, LUCKLY. We cannot leave before next Sunday afternoon at the earliest. I would like to arrive at Oshkosh early in the morning to avoid the mad rush and get situated. That being said it would have to be Tuesday morning. I would like to camp near the other RV-10s , any chance that might happen? Any tips/help would be greatly appreciated. Ron in Nova Scotia Read this topic online here: http://forums.matronics.com/viewtopic.php?p=346822#346822 ________________________________ Message 7 _____________________________________ Time: 06:11:41 PM PST US From: "DLM" Subject: Re: RV10-List: OSH camping Just to confirm I will need a tent spot for the week from 7/24 through 7/30. The aircraft will be parked in the War Bird section N10019; the 19th Grumman HU16B Albatross produced in 1951. R1820 radial engines of 1475 HP each. It will be the gray ghost until it returns to the Grumman factory for a repaint. My phone is 480-626-4048 if you have extra space. ----- Original Message ----- From: DLM To: rv10-list@matronics.com Sent: Saturday, July 16, 2011 9:16 PM Subject: RV10-List: OSH camping My 10 went to Arlington this year and is in the hangar awaiting the repaired Trutrak Digiflite VSGV. David N46007 ________________________________ Message 8 _____________________________________ Time: 06:50:54 PM PST US Subject: Re: RV10-List: OSH camping From: Robin Marks i'd camp in the Albatross! Do Not Archive [image: Grumman HU-16B Albatross Military Aircraft] On Sun, Jul 17, 2011 at 9:08 PM, DLM wrote: > ** > Just to confirm I will need a tent spot for the week from 7/24 through > 7/30. The aircraft will be parked in the War Bird section N10019; the 19th > Grumman HU16B Albatross produced in 1951. R1820 radial engines of 1475 HP > each. It will be the gray ghost until it returns to the Grumman factory for > a repaint. My phone is 480-626-4048 if you have extra space. > > ----- Original Message ----- > *From:* DLM > *To:* rv10-list@matronics.com > *Sent:* Saturday, July 16, 2011 9:16 PM > *Subject:* RV10-List: OSH camping > > My 10 went to Arlington this year and is in the hangar awaiting the > repaired Trutrak Digiflite VSGV. > > David N46007 > > * > > href="http://www.matronics.com/Navigator?RV10-List">http://www.matronics.com/Navigator?RV10-List > href="http://forums.matronics.com">http://forums.matronics.com > href="http://www.matronics.com/contribution">http://www.matronics.com/c* > > * > > * > > ________________________________ Message 9 _____________________________________ Time: 07:31:52 PM PST US From: "DLM" Subject: Re: RV10-List: OSH camping I will have to see whether that is an option; but alas the relief tube will be draining where others walk. ----- Original Message ----- From: Robin Marks To: rv10-list@matronics.com Sent: Sunday, July 17, 2011 6:48 PM Subject: Re: RV10-List: OSH camping i'd camp in the Albatross! Do Not Archive On Sun, Jul 17, 2011 at 9:08 PM, DLM wrote: Just to confirm I will need a tent spot for the week from 7/24 through 7/30. The aircraft will be parked in the War Bird section N10019; the 19th Grumman HU16B Albatross produced in 1951. R1820 radial engines of 1475 HP each. It will be the gray ghost until it returns to the Grumman factory for a repaint. My phone is 480-626-4048 if you have extra space. ----- Original Message ----- From: DLM To: rv10-list@matronics.com Sent: Saturday, July 16, 2011 9:16 PM Subject: RV10-List: OSH camping My 10 went to Arlington this year and is in the hangar awaiting the repaired Trutrak Digiflite VSGV. David N46007 href="http://www.matronics.com/Navigator?RV10-List">http://www.matronic s.com/Navigator?RV10-List href="http://forums.matronics.com">http://forums.matronics.com href="http://www.matronics.com/contribution">http://www.matronics.com/c get="_blank">http://www.matronics.com/Navigator?RV10-List tp://forums.matronics.com _blank">http://www.matronics.com/contribution ________________________________ Message 10 ____________________________________ Time: 07:40:18 PM PST US From: David Hertner Subject: RV10-List: Second Ride In 7.5 Years Hi Everyone, Just want to give a big THANKS!!! to Ivan Kristensen for giving my son Thomas and I a wonderful flight in his beautiful bird this evening. This is only the second flight for me in an RV-10 and the first for Thomas. Both of us were astounded at the quality of flight and the roominess of the plane. Thank You Ivan for a most needed motivational flight so late in my lengthy construction. Dave and Thomas Hertner Just about to put fuel in the tanks. #40164 * * ________________________________ Message 11 ____________________________________ Time: 08:03:20 PM PST US From: Tim Olson Subject: Re: RV10-List: Re: OSH camp conditions report Hi Ron, It's great to have people flying in from far away. It's always interesting to talk to the folks who traveled a ways to get there. Regarding camping by the other RV-10 folks, this year there isn't any RV-10 group site arrangement. So nobody has coordinated any sort of camping sites. I've got mine already, and I know some other people will show up throughout the coming week, but this year it's basically every man for themselves. I'm not sure what next year will bring, but I think we grew past the manageable group camping arrangements, so I'm not too sure it'll happen. This doesn't mean you can't camp, of course, but you're unlikely to be camping next to other RV-10 folks without making pre-arrangements before they stake their sites. Now if you're talking about camping with your plane, you may end up by other RV-10's in that case....but the homebuilt camping is generally pretty disorganized by make/model. You'd likely be close to plenty of RV-10 guys, but they park them as they bring them in so you never know. OSH is just one big "winging it" time! Tim Olson - RV-10 N104CD do not archive On 7/17/2011 7:54 PM, Ron B. wrote: > --> RV10-List message posted by: "Ron B." > > Tim Making plans for our first time flying into Oshkosh. We tried for > Sun n Fun this spring but only made it to South Carolina, LUCKLY. We > cannot leave before next Sunday afternoon at the earliest. I would > like to arrive at Oshkosh early in the morning to avoid the mad rush > and get situated. That being said it would have to be Tuesday > morning. I would like to camp near the other RV-10s , any chance that > might happen? Any tips/help would be greatly appreciated. Ron in Nova > Scotia > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=346822#346822 > > ________________________________ Message 12 ____________________________________ Time: 08:07:40 PM PST US From: Bob Kaufmann Subject: RE: RV10-List: OSH camping That's why God made buckets. From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of DLM Sent: Sunday, July 17, 2011 8:28 PM Subject: Re: RV10-List: OSH camping I will have to see whether that is an option; but alas the relief tube will be draining where others walk. ----- Original Message ----- From: Robin Marks Sent: Sunday, July 17, 2011 6:48 PM Subject: Re: RV10-List: OSH camping i'd camp in the Albatross! Do Not Archive Grumman HU-16B Albatross Military Aircraft On Sun, Jul 17, 2011 at 9:08 PM, DLM wrote: Just to confirm I will need a tent spot for the week from 7/24 through 7/30. The aircraft will be parked in the War Bird section N10019; the 19th Grumman HU16B Albatross produced in 1951. R1820 radial engines of 1475 HP each. It will be the gray ghost until it returns to the Grumman factory for a repaint. My phone is 480-626-4048 if you have extra space. ----- Original Message ----- From: DLM Sent: Saturday, July 16, 2011 9:16 PM Subject: RV10-List: OSH camping My 10 went to Arlington this year and is in the hangar awaiting the repaired Trutrak Digiflite VSGV. David N46007 href="http://www.matronics.com/Navigator?RV10-List">http://www.matronics.com /Navigator?RV10-List href="http://forums.matronics.com">http://forums.matronics.com href="http://www.matronics.com/contribution">http://www.matronics.com/c get="_blank">http://www.matronics.com/Navigator?RV10-List tp://forums.matronics.com _blank">http://www.matronics.com/contribution href="http://www.matronics.com/Navigator?RV10-List">http://www.matronics.com /Navigator?RV10-List href="http://forums.matronics.com">http://forums.matronics.com href="http://www.matronics.com/contribution">http://www.matronics.com/c ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message rv10-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/RV10-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/rv10-list Browse Digests http://www.matronics.com/digest/rv10-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.