Today's Message Index:
----------------------
1. 07:13 AM - transducers (Chris Hukill)
2. 07:41 AM - Re: transducers (Michael Kraus)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
The picture in the plans show that the oil and fuel pressure
transducers that attach to the manifold mounted on the firewall have
the transducers pointed down. The transducers that came with my Dynon
are to large in diameter to mount that way. The ones shown look to be
smaller diameter. Does anyone know what transducers are pictured in the
plans and if they are compatible with the Dynon Skyview?
Chris Hukill
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
I have the SkyView in my -10. I used their transducers and have them pointed forward.
Plenty of room. You are correct, they will not fit vertical. Let me
know if you want a picture and I can dig one up.
-Mike Kraus
Sent from my iPhone
On Aug 6, 2011, at 9:58 AM, Chris Hukill <cjhukill@cox.net> wrote:
>
> The picture in the plans show that the oil and fuel pressure transducers that
attach to the manifold mounted on the firewall have the transducers pointed down.
The transducers that came with my Dynon are to large in diameter to mount
that way. The ones shown look to be smaller diameter. Does anyone know what transducers
are pictured in the plans and if they are compatible with the Dynon
Skyview?
> Chris Hukill
>
>
>
>
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|