---------------------------------------------------------- RV10-List Digest Archive --- Total Messages Posted Mon 08/15/11: 12 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 02:23 PM - Tools for sale (Gary Specketer) 2. 04:12 PM - Modified Van's air box (Carl Froehlich) 3. 04:20 PM - Paint air water separator (Carl Froehlich) 4. 04:21 PM - Re: Tools for sale (Roxanne and Mike Lefever) 5. 04:47 PM - Re: Tools for sale (Rob Kermanj) 6. 04:59 PM - Re: Tools for sale (Dick Gurleys) 7. 05:04 PM - Re: Tools for sale (Dick Gurleys) 8. 08:09 PM - Final NTSB report on Todd Swezey's accident (Rob Kochman) 9. 09:40 PM - tips on panel hole layout and cutting (jayb) 10. 10:08 PM - Re: tips on panel hole layout and cutting (Sean S. Blair) 11. 10:20 PM - Re: tips on panel hole layout and cutting (Sean S. Blair) 12. 10:32 PM - Re: tips on panel hole layout and cutting (Sean S. Blair) ________________________________ Message 1 _____________________________________ Time: 02:23:07 PM PST US From: "Gary Specketer" Subject: RV10-List: Tools for sale RE: RV10-List: Re: External Brake Lines - crackMy friend died this spring and I am charged with selling his tools. They can be seen here https://picasaweb.google.com/gspecketer/RonSStuff?authkey=Gv1sRgCM6ChfP d---NtAE# If any are of interest, contact me Gary Specketer gspecketer@hotmail.com 770-403-3450 ________________________________ Message 2 _____________________________________ Time: 04:12:19 PM PST US From: "Carl Froehlich" Subject: RV10-List: Modified Van's air box I found that the Van's air box can be easily modified to handle the larger K&N E-1000 filter. Photo attached. This air box is made for the James Cowl. Also note the .032 aluminum plate and air filter brackets in the bottom of the air box. On my RV-8A I found the air filter wears away the bottom fiberglass, and the bottom of the air filter tends to lose its shape with time (the bottom diameter gets smaller). The plate also makes the alternate air door fabrication easier. Carl ________________________________ Message 3 _____________________________________ Time: 04:20:37 PM PST US From: "Carl Froehlich" Subject: RV10-List: Paint air water separator For those of you doing your own painting, attached photo is a water separator that I find to work well. When painting I add a few blocks of ice to the water. In the photo the red hose is air in, the orange hose is air out. The drain valve is connected at the bottom of the vertical PVC pipe. The vertical pipe acts as a water collector. Carl ________________________________ Message 4 _____________________________________ Time: 04:21:21 PM PST US From: Roxanne and Mike Lefever Subject: RE: RV10-List: Tools for sale Gary looks like there are 9 plastic trays plus one bag that contain various pop rivets=2C screws=2C nuts washers etc...................I would take al l 10 of these if they are still availble. From: speckter@comcast.net Subject: RV10-List: Tools for sale RE: RV10-List: Re: External Brake Lines - crack My friend died this spring and I am charged with selling his tools. They can be seen here https://picasaweb.google.com/gspecketer/RonSStuff?authkey=Gv1sRgCM6ChfPd- --NtAE# If any are of interest=2C contact me Gary Specketer gspecketer@hotmail.com 770-403-3450 ________________________________ Message 5 _____________________________________ Time: 04:47:26 PM PST US Subject: Re: RV10-List: Tools for sale From: Rob Kermanj I will take. The river squeezed, nut plates nut sand s drills. Tell me how t o pay. Thanks. Rob Kermanj Sent from my iPad On Aug 15, 2011, at 5:19 PM, "Gary Specketer" wrote: > My friend died this spring and I am charged with selling his tools. They c an be seen here > > https://picasaweb.google.com/gspecketer/RonSStuff?authkey=Gv1sRgCM6ChfPd ---NtAE# > > If any are of interest, contact me > > Gary Specketer > gspecketer@hotmail.com > 770-403-3450 > > ========================== ========= ========================== ========= ========================== ========= ========================== ========= > ________________________________ Message 6 _____________________________________ Time: 04:59:49 PM PST US From: Dick Gurleys Subject: Re: RV10-List: Tools for sale I will take the rivet nut squeezed Sent from my iPad On Aug 15, 2011, at 7:47 PM, Rob Kermanj wrote: > I will take. The river squeezed, nut plates nut sand s drills. Tell me ho w to pay. Thanks. > > Rob Kermanj > Sent from my iPad > > On Aug 15, 2011, at 5:19 PM, "Gary Specketer" wrote : > >> My friend died this spring and I am charged with selling his tools. They can be seen here >> >> https://picasaweb.google.com/gspecketer/RonSStuff?authkey=Gv1sRgCM6ChfP d---NtAE# >> >> If any are of interest, contact me >> >> Gary Specketer >> gspecketer@hotmail.com >> 770-403-3450 >> >> >> > > 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > ________________________________ Message 7 _____________________________________ Time: 05:04:42 PM PST US Subject: Re: RV10-List: Tools for sale From: Dick Gurleys Sent from my iPad On Aug 15, 2011, at 7:58 PM, Dick Gurleys wrote: > I will take the rivet nut squeezer and mandrels. Let me know how to pay Dick Gurley > > Sent from my iPad > > On Aug 15, 2011, at 7:47 PM, Rob Kermanj wrote: > >> I will take. The river squeezed, nut plates nut sand s drills. Tell me h ow to pay. Thanks. >> >> Rob Kermanj >> Sent from my iPad >> >> On Aug 15, 2011, at 5:19 PM, "Gary Specketer" wrot e: >> >>> My friend died this spring and I am charged with selling his tools. The y can be seen here >>> >>> https://picasaweb.google.com/gspecketer/RonSStuff?authkey=Gv1sRgCM6Chf Pd---NtAE# >>> >>> If any are of interest, contact me >>> >>> Gary Specketer >>> gspecketer@hotmail.com >>> 770-403-3450 >>> >>> >>> >> >> 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D >> ________________________________ Message 8 _____________________________________ Time: 08:09:24 PM PST US Subject: RV10-List: Final NTSB report on Todd Swezey's accident From: Rob Kochman http://dms.ntsb.gov/aviation/AccidentReports/mm04tyq440db21b4iuke52qe1/X08152011120000.pdf Not very enlightening. -Rob -- Rob Kochman RV-10 Flying since March 2011 Woodinville, WA http://kochman.net/N819K ________________________________ Message 9 _____________________________________ Time: 09:40:10 PM PST US Subject: RV10-List: tips on panel hole layout and cutting From: "jayb" Does anyone know of a good tutorial for panel layout / cutting? I understand that Kitplanes May 2006 issue had a good article, but sadly I don't have it. I'm especially interested in how to cut the combo hole for Altimeter w/ knob. I found a panel layout template and mounting hole jig in ACS. Anyone know if those are worth the $$? I'm comfortable using a fly cutter for the four 2.25" steam gauges. However, it seems that accuracy is required for screw holes on gauges and EFISes. Any tips, tricks, time savers or pointers to further information is appreciated! Cheers, Jay Read this topic online here: http://forums.matronics.com/viewtopic.php?p=349594#349594 ________________________________ Message 10 ____________________________________ Time: 10:08:38 PM PST US From: "Sean S. Blair" Subject: Re: RV10-List: tips on panel hole layout and cutting Jay, I hear there are several companies that will waterjet or CNC your panel to perfection.=C2- You should be able to use panel planning software and sen d the file for the cut.=C2- Stein may offer this service. Sean Blair RV-7=C2- ----- Original Message ----- From: "jayb" Sent: Monday, August 15, 2011 10:34:22 PM Subject: RV10-List: tips on panel hole layout and cutting Does anyone know of a good tutorial for panel layout / cutting? I understan d that Kitplanes May 2006 issue had a good article, but sadly I don't have it. I'm especially interested in how to cut the combo hole for Altimeter w/ kno b. I found a panel layout template and mounting hole jig in ACS. Anyone kno w if those are worth the $$? I'm comfortable using a fly cutter for the four 2.25" steam gauges. However , it seems that accuracy is required for screw holes on gauges and EFISes. Any tips, tricks, time savers or pointers to further information is appreci ated! Cheers, Jay Read this topic online here: http://forums.matronics.com/viewtopic.php?p=349594#349594 =========== =========== MS - =========== e - =C2- =C2- =C2- =C2- =C2--Matt Dralle, List Admin. =========== ________________________________ Message 11 ____________________________________ Time: 10:20:23 PM PST US From: "Sean S. Blair" Subject: Re: RV10-List: tips on panel hole layout and cutting A few options: http://www.aircraftspruce.com/catalog/pspages/panelplanner.php http://www.frontpanelexpress.com/products/showcase/instrument-panels/index. html Sean Blair RV-7 ----- Original Message ----- From: "jayb" Sent: Monday, August 15, 2011 10:34:22 PM Subject: RV10-List: tips on panel hole layout and cutting Does anyone know of a good tutorial for panel layout / cutting? I understan d that Kitplanes May 2006 issue had a good article, but sadly I don't have it. I'm especially interested in how to cut the combo hole for Altimeter w/ kno b. I found a panel layout template and mounting hole jig in ACS. Anyone kno w if those are worth the $$? I'm comfortable using a fly cutter for the four 2.25" steam gauges. However , it seems that accuracy is required for screw holes on gauges and EFISes. Any tips, tricks, time savers or pointers to further information is appreci ated! Cheers, Jay Read this topic online here: http://forums.matronics.com/viewtopic.php?p=349594#349594 =========== =========== MS - =========== e - =C2- =C2- =C2- =C2- =C2--Matt Dralle, List Admin. =========== ________________________________ Message 12 ____________________________________ Time: 10:32:00 PM PST US From: "Sean S. Blair" Subject: Re: RV10-List: tips on panel hole layout and cutting ....and another idea at VAF: http://www.vansairforce.com/community/showthread.php?t=75053&highlight= panel+design+software Sean Blair RV-7 ----- Original Message ----- From: "Sean S. Blair" Sent: Monday, August 15, 2011 11:13:42 PM Subject: Re: RV10-List: tips on panel hole layout and cutting A few options: =C2- http://www.aircraftspruce.com/catalog/pspages/panelplanner.php =C2- http://www.frontpanelexpress.com/products/showcase/instrument-panels/index. html Sean Blair RV-7 =C2- ----- Original Message ----- From: "jayb" Sent: Monday, August 15, 2011 10:34:22 PM Subject: RV10-List: tips on panel hole layout and cutting Does anyone know of a good tutorial for panel layout / cutting? I understan d that Kitplanes May 2006 issue had a good article, but sadly I don't have it. I'm especially interested in how to cut the combo hole for Altimeter w/ kno b. I found a panel layout template and mounting hole jig in ACS. Anyone kno w if those are worth the $$? I'm comfortable using a fly cutter for the four 2.25" steam gauges. However , it seems that accuracy is required for screw holes on gauges and EFISes. Any tips, tricks, time savers or pointers to further information is appreci ated! Cheers, Jay Read this topic online here: http://forums.matronics.com/viewtopic.php?p=349594#349594 nbsp; =C2- =C2- =C2- =C2- =C2- =C2- =C2- =C2- =C2--Matt D ============== == ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message rv10-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/RV10-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/rv10-list Browse Digests http://www.matronics.com/digest/rv10-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.