---------------------------------------------------------- RV10-List Digest Archive --- Total Messages Posted Fri 09/02/11: 4 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 07:48 AM - Re: Precision Airmotive fuel injection - flow divider and the ca (AirMike) 2. 08:11 AM - Re: Re: Precision Airmotive fuel injection - flow divider and the ca (Jesse Saint) 3. 08:21 AM - Re: parking brake valve (rv10flyer) 4. 10:45 AM - Re: Re: Precision Airmotive fuel injection - flow divider and the ca (David Leikam) ________________________________ Message 1 _____________________________________ Time: 07:48:06 AM PST US Subject: RV10-List: Re: Precision Airmotive fuel injection - flow divider and the ca From: "AirMike" Lean of peak - is that the procedure where one converts fuel savings into profits for cylinder/valve manufacturers ? -------- See you OSH '11 Q/B - flying 1 yr+ Read this topic online here: http://forums.matronics.com/viewtopic.php?p=351252#351252 ________________________________ Message 2 _____________________________________ Time: 08:11:14 AM PST US Subject: Re: RV10-List: Re: Precision Airmotive fuel injection - flow divider and the ca From: Jesse Saint No, Lean of Peak is the procedure where one converts profits for Oil Companies into more flying time for RV-10 owners. It's a really cool process! do not archive Jesse Saint Saint Aviation, Inc. jesse@saintaviation.com C: 352-427-0285 F: 815-377-3694 On Sep 2, 2011, at 10:42 AM, AirMike wrote: > > Lean of peak - is that the procedure where one converts fuel savings into profits for cylinder/valve manufacturers ? > > -------- > See you OSH '11 > Q/B - flying 1 yr+ > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=351252#351252 > > > > > > > > > > ________________________________ Message 3 _____________________________________ Time: 08:21:28 AM PST US Subject: RV10-List: Re: parking brake valve From: "rv10flyer" Thanks Dave...I can put my 1000 psi gage away as I was going to test that. Patrick, If i was going to air/nitrogen pressure test the system, I would disconnect lines at tee ftg on back side of reservoir as I would not want to blow it up. Install a tee ftg between the two open ends and connect to a regulated air/nitrogen source. Pressurize to 100 psi with an accurate gage attached. Shut everything off and monitor pres gage for a few hours. If pres goes down a lb or so then stabilizes you are ok. If it continues to drop get out your soap bubble solution. Make sure you did not use ez turn/fuel lube as it may not withstand the 800 psi later on. I may just bleed them and pass on the pres test, have not decided. -------- Wayne Gillispie, A&P 5/93, PPC 10/08 Bldr# 40983SB Cowling then time to get baffled. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=351256#351256 ________________________________ Message 4 _____________________________________ Time: 10:45:38 AM PST US Subject: Re: RV10-List: Re: Precision Airmotive fuel injection - flow divider and the ca From: David Leikam Actually it's the opposite. David Leikam RV10 Flying On Sep 2, 2011, at 9:42 AM, AirMike wrote: > > Lean of peak - is that the procedure where one converts fuel savings into profits for cylinder/valve manufacturers ? > > -------- > See you OSH '11 > Q/B - flying 1 yr+ > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=351252#351252 > > > > > > > > > > ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message rv10-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/RV10-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/rv10-list Browse Digests http://www.matronics.com/digest/rv10-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.