---------------------------------------------------------- RV10-List Digest Archive --- Total Messages Posted Tue 09/13/11: 19 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 10:22 AM - Re: YIO-540 airflow performance injectors (rv10flyer) 2. 10:35 AM - Re: Workbench size? (EdKranz) 3. 10:51 AM - Re: YIO-540 airflow performance injectors (Bob Turner) 4. 12:48 PM - Re: YIO-540 airflow performance injectors (rv10flyer) 5. 01:34 PM - Re: Re: YIO-540 airflow performance injectors (Don McDonald) 6. 02:02 PM - Re: YIO-540 airflow performance injectors (rv10flyer) 7. 02:57 PM - Re: Re: YIO-540 airflow performance injectors (Don McDonald) 8. 03:55 PM - Re: Re: Workbench size? (William DeLacey) 9. 04:17 PM - Trip East (Deems Davis) 10. 05:04 PM - Re: Trip East (Jack Phillips) 11. 05:06 PM - Re: Trip East (Richard Bibb) 12. 05:08 PM - Re: Trip East (Carl Froehlich) 13. 05:15 PM - Re: Trip East (Bill Watson) 14. 05:16 PM - Re: Trip East (Bill Watson) 15. 05:42 PM - Re: Trip East (David McNeill) 16. 07:24 PM - Re: Trip East (Kelly McMullen) 17. 08:17 PM - Re: Trip East (John Cox) 18. 08:32 PM - Re: Trip East (DLM) 19. 09:04 PM - Re: Trip East (Jim Beyer) ________________________________ Message 1 _____________________________________ Time: 10:22:46 AM PST US Subject: RV10-List: Re: YIO-540 airflow performance injectors From: "rv10flyer" Mine have single bands, which are .028". -------- Wayne Gillispie, A&P 5/93, PPC 10/08 Bldr# 40983SB Baffles then fuel/oil/exhaust. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=352160#352160 ________________________________ Message 2 _____________________________________ Time: 10:35:34 AM PST US Subject: RV10-List: Re: Workbench size? From: "EdKranz" Thanks for all the great advice! I decided to go with two 32" x 60" tables on wheels, with 3/4" MDF tops, with 4" overhangs on all sides... on wheels. I got them both built over the weekend, and between the two new benches, and my existing built in 10' bench, I'm hoping to have enough room. I think they're going to work really well. Now that that's done, I guess it's on to the tool collecting stage! Read this topic online here: http://forums.matronics.com/viewtopic.php?p=352165#352165 ________________________________ Message 3 _____________________________________ Time: 10:51:43 AM PST US Subject: RV10-List: Re: YIO-540 airflow performance injectors From: "Bob Turner" Okay, I"m confused. I have a copy of an Airflow manual which says one band is .022, no band is .028". Maybe the manual is out of date? Or just incorrect? -------- Bob Turner RV-10 QB Read this topic online here: http://forums.matronics.com/viewtopic.php?p=352169#352169 ________________________________ Message 4 _____________________________________ Time: 12:48:56 PM PST US Subject: RV10-List: Re: YIO-540 airflow performance injectors From: "rv10flyer" Sorry, mine are about .023" not .028". I plan on balancing next year. They start out small don't they. -------- Wayne Gillispie, A&P 5/93, PPC 10/08 Bldr# 40983SB Baffles then fuel/oil/exhaust. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=352177#352177 ________________________________ Message 5 _____________________________________ Time: 01:34:06 PM PST US From: Don McDonald Subject: Re: RV10-List: Re: YIO-540 airflow performance injectors Nope.... stock is .028...... my only adjustment was changing out the .028 f or a .0265 in the #4 cylinder.- What I can tell you is that when you're d oing the LOP test... do it on a couple (several) of different days, with di fferent wind directions, and different temps, power settings, altitudes.... it all seems to matter... then just when you think you've got it, it'll ch ange a little on you.- Also, rather than trying to write down all the gph and temp settings, just take a digtal pic every 10th of a gallon.=0ADon Mc Donald=0AFlying this wonderful machine!=0A=0AFrom: rv10flyer =0ATo: rv10-list@matronics.com=0ASent: Tuesday, September 13, 2011 2:44 PM=0ASubject: RV10-List: Re: YIO-540 airflow performance injector com>=0A=0ASorry, mine are about .023" not .028". I plan on balancing next y ear. They start out small don't they.=0A=0A--------=0AWayne Gillispie, A&am p;P 5/93, PPC 10/08=0ABldr# 40983SB Baffles then fuel/oil/exhaust.=0A=0A=0A =0A=0ARead this topic online here:=0A=0Ahttp://forums.matronics.com/viewtop - - - - - - - - - - - - -Matt Dralle, List Admin. ==== ________________________________ Message 6 _____________________________________ Time: 02:02:46 PM PST US Subject: RV10-List: Re: YIO-540 airflow performance injectors From: "rv10flyer" Must have been where I came up with .028". I also have new YIO-540 and it has .022-.023" nozzles. Mfr is Precision Airmotive, LLC. Smaller nozzles keep the pressure up for better atomization. -------- Wayne Gillispie, A&P 5/93, PPC 10/08 Bldr# 40983SB Baffles then fuel/oil/exhaust. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=352186#352186 ________________________________ Message 7 _____________________________________ Time: 02:57:55 PM PST US From: Don McDonald Subject: Re: RV10-List: Re: YIO-540 airflow performance injectors Not sure how much better it can get... I cruise with TAS around 190mph burn ing between 8.8 and 10 gph.=0ADon-=0A=0AFrom: rv10flyer =0ATo: rv10-list@matronics.com=0ASent: Tuesday, September 13, 201 1 4:00 PM=0ASubject: RV10-List: Re: YIO-540 airflow performance injectors om>=0A=0AMust have been where I came up with .028". I also have new YIO-540 and it has .022-.023" nozzles. Mfr is Precision Airmotive, LLC. Smaller no zzles keep the pressure up for better atomization.=0A=0A--------=0AWayne Gi llispie, A&P 5/93, PPC 10/08=0ABldr# 40983SB Baffles then fuel/oil/exha ust.=0A=0A=0A=0A=0ARead this topic online here:=0A=0Ahttp://forums.matronic - - - - - - - - - - - - - - - -Matt Dralle, L ======= ________________________________ Message 8 _____________________________________ Time: 03:55:52 PM PST US Subject: Re: RV10-List: Re: Workbench size? From: William DeLacey A useful addition I use is a pair of 4"x4" by four foot beams carpeted on top for each bench. Use a 1"x2" piece and a lag bolt to clip the beams to the bench top overhang. Move them where ever you need them, makes the bench 4 foot wide temporarily and allows chips and tools to be below the part, wing or stab. In addition, I have four 4"x4" by two foot carpeted pieces. Use them between the 4' beams for support. You can insert them and remove at will. On Sep 13, 2011, at 10:32 AM, EdKranz wrote: > > Thanks for all the great advice! > > I decided to go with two 32" x 60" tables on wheels, with 3/4" MDF tops, with 4" overhangs on all sides... on wheels. > > I got them both built over the weekend, and between the two new benches, and my existing built in 10' bench, I'm hoping to have enough room. I think they're going to work really well. > > Now that that's done, I guess it's on to the tool collecting stage! > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=352165#352165 > > > > > > > > > > > ________________________________ Message 9 _____________________________________ Time: 04:17:42 PM PST US From: "Deems Davis" Subject: RV10-List: Trip East Judy and I are heading out to the EastCoast from DVT. We are leaving Thurs am. and plan to o'nite in Branson Mo. weather permitting, Then on into Greenville NC. On Fri. We will spend the weekend with our son and daughter in law and then head to FRG on Mon. We've made the trip from DVT -OSH-FRG a couple of times and have a good idea of the what to see and expect on the 'northen' route, but with our son recently locating in NC it gives us an opportunity to make the trip a bigger loop this time. So since the east coast is not my stomping ground I thought I'd ping this group for input. We are definitely going to make a visit to 1st Flight either by air or land. While we are there. My son also informs me that we HAVE to do some NC BarBQ while we are there. Other than that we'd love any suggestions, particularly for fuel/rest stops & FBO's. Deems N519PJ deemsrv10.com ________________________________ Message 10 ____________________________________ Time: 05:04:23 PM PST US From: "Jack Phillips" Subject: RE: RV10-List: Trip East For NC Barbeque (or any barbeque for that matter), you can't do any better than the Pik N Pig, right on the airport at Carthage, NC (5NC3). It is about 45 nm southwest of Raleigh-Durham (KRDU). Here's a video about it: http://www.wral.com/news/local/video/6056117/#/vid6056117 Note: The Pik N Pig is closed on Mondays, and they don't take credit cards. Cash or check only. Jack Phillips #40610 Wings Raleigh, NC _____ From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Deems Davis Sent: Tuesday, September 13, 2011 7:15 PM Subject: RV10-List: Trip East Judy and I are heading out to the EastCoast from DVT. We are leaving Thurs am. and plan to o'nite in Branson Mo. weather permitting, Then on into Greenville NC. On Fri. We will spend the weekend with our son and daughter in law and then head to FRG on Mon. We've made the trip from DVT -OSH-FRG a couple of times and have a good idea of the what to see and expect on the 'northen' route, but with our son recently locating in NC it gives us an opportunity to make the trip a bigger loop this time. So since the east coast is not my stomping ground I thought I'd ping this group for input. We are definitely going to make a visit to 1st Flight either by air or land. While we are there. My son also informs me that we HAVE to do some NC BarBQ while we are there. Other than that we'd love any suggestions, particularly for fuel/rest stops & FBO's. Deems N519PJ deemsrv10.com ________________________________ Message 11 ____________________________________ Time: 05:06:15 PM PST US From: "Richard Bibb" Subject: RE: RV10-List: Trip East If you've never been Williamsburg, VA is a must see. Colonial Williamsburg is a short cab ride from KJGG and the airport has a very good airport sandwich shop on the field. Short flight from Greenville area. Richard Bibb N104HB in progress _____ From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Deems Davis Sent: Tuesday, September 13, 2011 7:15 PM Subject: RV10-List: Trip East Judy and I are heading out to the EastCoast from DVT. We are leaving Thurs am. and plan to o'nite in Branson Mo. weather permitting, Then on into Greenville NC. On Fri. We will spend the weekend with our son and daughter in law and then head to FRG on Mon. We've made the trip from DVT -OSH-FRG a couple of times and have a good idea of the what to see and expect on the 'northen' route, but with our son recently locating in NC it gives us an opportunity to make the trip a bigger loop this time. So since the east coast is not my stomping ground I thought I'd ping this group for input. We are definitely going to make a visit to 1st Flight either by air or land. While we are there. My son also informs me that we HAVE to do some NC BarBQ while we are there. Other than that we'd love any suggestions, particularly for fuel/rest stops & FBO's. Deems N519PJ deemsrv10.com ________________________________ Message 12 ____________________________________ Time: 05:08:00 PM PST US From: "Carl Froehlich" Subject: RE: RV10-List: Trip East Some quick suggestions: - Tangier Island (TGI). Need about 3 hours to see everything. A real step back in time and great crab cakes. - Ocean City (OXB). - Fuel; o ONX - Currituck County Regional Airport Currituck, NC o ECG - Elizabeth City Coast Guard Air Station/Regional Airport Elizabeth City, NC o XSA - Tappahannock-Essex County Airport Tappahannock, VA if you find yourself a little west of direct. Carl Dogwood Airpark (VA42) From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Deems Davis Sent: Tuesday, September 13, 2011 7:15 PM Subject: RV10-List: Trip East Judy and I are heading out to the EastCoast from DVT. We are leaving Thurs am. and plan to o'nite in Branson Mo. weather permitting, Then on into Greenville NC. On Fri. We will spend the weekend with our son and daughter in law and then head to FRG on Mon. We've made the trip from DVT -OSH-FRG a couple of times and have a good idea of the what to see and expect on the 'northen' route, but with our son recently locating in NC it gives us an opportunity to make the trip a bigger loop this time. So since the east coast is not my stomping ground I thought I'd ping this group for input. We are definitely going to make a visit to 1st Flight either by air or land. While we are there. My son also informs me that we HAVE to do some NC BarBQ while we are there. Other than that we'd love any suggestions, particularly for fuel/rest stops & FBO's. Deems N519PJ deemsrv10.com ________________________________ Message 13 ____________________________________ Time: 05:15:52 PM PST US From: Bill Watson Subject: Re: RV10-List: Trip East Well, Pik-n-Pig is a must - 5NC3 - Carthage. The best in fly-in NC-style barbecue. Saturday's at noon is often an RV fly-in but open for lunch and dinner all week except Mondays. I'd love to rendevous if you just share a day and time. Now that I'm flying.... I have a life again .... I think. Bill " 1.5 hours to Phase 2 and the smile just keeps getting wider" Watson - Durham NC On 9/13/2011 7:14 PM, Deems Davis wrote: > > Judy and I are heading out to the EastCoast from DVT. We are leaving > Thurs am. and plan to o'nite in Branson Mo. weather permitting, Then > on into Greenville NC. On Fri. We will spend the weekend with our son > and daughter in law and then head to FRG on Mon. We've made the trip > from DVT -OSH-FRG a couple of times and have a good idea of the what > to see and expect on the 'northen' route, but with our son recently > locating in NC it gives us an opportunity to make the trip a bigger > loop this time. > > So since the east coast is not my stomping ground I thought I'd ping > this group for input. We are definitely going to make a visit to 1st > Flight either by air or land. While we are there. My son also informs > me that we HAVE to do some NC BarBQ while we are there. Other than > that we'd love any suggestions, particularly for fuel/rest stops & FBO's. > > Deems > > N519PJ > > deemsrv10.com > > ________________________________ Message 14 ____________________________________ Time: 05:16:25 PM PST US From: Bill Watson Subject: Re: RV10-List: Trip East You beat me! do not archive On 9/13/2011 8:00 PM, Jack Phillips wrote: > > For NC Barbeque (or any barbeque for that matter), you can't do any > better than the Pik N Pig, right on the airport at Carthage, NC > (5NC3). It is about 45 nm southwest of Raleigh-Durham (KRDU). Here's > a video about it: > http://www.wral.com/news/local/video/6056117/#/vid6056117 > > Note: The Pik N Pig is closed on Mondays, and they don't take credit > cards. Cash or check only. > > Jack Phillips > > #40610 Wings > > Raleigh, NC > > ------------------------------------------------------------------------ > > *From:*owner-rv10-list-server@matronics.com > [mailto:owner-rv10-list-server@matronics.com] *On Behalf Of *Deems Davis > *Sent:* Tuesday, September 13, 2011 7:15 PM > *To:* rv10-list@matronics.com > *Subject:* RV10-List: Trip East > > Judy and I are heading out to the EastCoast from DVT. We are leaving > Thurs am. and plan to o'nite in Branson Mo. weather permitting, Then > on into Greenville NC. On Fri. We will spend the weekend with our son > and daughter in law and then head to FRG on Mon. We've made the trip > from DVT -OSH-FRG a couple of times and have a good idea of the what > to see and expect on the 'northen' route, but with our son recently > locating in NC it gives us an opportunity to make the trip a bigger > loop this time. > > So since the east coast is not my stomping ground I thought I'd ping > this group for input. We are definitely going to make a visit to 1st > Flight either by air or land. While we are there. My son also informs > me that we HAVE to do some NC BarBQ while we are there. Other than > that we'd love any suggestions, particularly for fuel/rest stops & FBO's. > > Deems > > N519PJ > > deemsrv10.com > > * * > * * > ** > ** > ** > *http://www.matronics.com/Navigator?RV10-List* > ** > ** > *http://forums.matronics.com* > ** > ** > *http://www.matronics.com/contribution* > * * > * > > > * ________________________________ Message 15 ____________________________________ Time: 05:42:59 PM PST US Subject: Re: RV10-List: Trip East From: David McNeill In Branson the show to see is the Presley show ( not Elvis). Sent from my iPad On Sep 13, 2011, at 16:14, "Deems Davis" wrote: > Judy and I are heading out to the EastCoast from DVT. We are leaving Thu rs am. and plan to o=99nite in Branson Mo. weather permitting, Then on into Greenville NC. On Fri. We will spend the weekend with our son and daug hter in law and then head to FRG on Mon. We=99ve made the trip from DV T -OSH-FRG a couple of times and have a good idea of the what to see and exp ect on the =98northen=99 route, but with our son recently locati ng in NC it gives us an opportunity to make the trip a bigger loop this time .. > > So since the east coast is not my stomping ground I thought I=99d pi ng this group for input. We are definitely going to make a visit to 1st Flig ht either by air or land. While we are there. My son also informs me that we HAVE to do some NC BarBQ while we are there. Other than that we=99d l ove any suggestions, particularly for fuel/rest stops & FBO=99s. > > > > Deems > > N519PJ > > deemsrv10.com > > > ========================== ========= ========================== ========= ========================== ========= ========================== ========= > ________________________________ Message 16 ____________________________________ Time: 07:24:21 PM PST US From: Kelly McMullen Subject: Re: RV10-List: Trip East Depending on weather, you might consider southern route. Hot Springs AR is one potential stop. Or you can just follow I-10 to I-20 to I-30 to I-40 all the way to Knoxville, then aim south a bit for NC. If you do planned route, Springfield Branson FBO is pretty good and has a self serve at one end of the field, IIRC. I don't know anything about the new Branson airport. Depending on whether you plan on non-stop or not, Borger, BGD is a good fuel stop...I prefer it to Dalhart, although Dalhart is acceptable as well. On 9/13/2011 5:14 PM, Deems Davis wrote: > > Judy and I are heading out to the EastCoast from DVT. We are leaving > Thurs am. and plan to onite in Branson Mo. weather permitting, Then > on into Greenville NC. On Fri. We will spend the weekend with our son > and daughter in law and then head to FRG on Mon. Weve made the trip > from DVT -OSH-FRG a couple of times and have a good idea of the what > to see and expect on the northen route, but with our son recently > locating in NC it gives us an opportunity to make the trip a bigger > loop this time. > > So since the east coast is not my stomping ground I thought Id ping > this group for input. We are definitely going to make a visit to 1st > Flight either by air or land. While we are there. My son also informs > me that we HAVE to do some NC BarBQ while we are there. Other than > that wed love any suggestions, particularly for fuel/rest stops & FBOs. > > Deems > > N519PJ > > deemsrv10.com > > * > > > * ________________________________ Message 17 ____________________________________ Time: 08:17:54 PM PST US Subject: Re: RV10-List: Trip East From: John Cox Stop by Spartanburg - Airflow Performance and visit Don. The BMW plant was interesting then you could take in the Carolinas as a pair. On Sep 13, 2011 4:23 PM, "Deems Davis" wrote: > Judy and I are heading out to the EastCoast from DVT. We are leaving Thurs > am. and plan to o'nite in Branson Mo. weather permitting, Then on into > Greenville NC. On Fri. We will spend the weekend with our son and daughter > in law and then head to FRG on Mon. We've made the trip from DVT -OSH-FRG a > couple of times and have a good idea of the what to see and expect on the > 'northen' route, but with our son recently locating in NC it gives us an > opportunity to make the trip a bigger loop this time. > > So since the east coast is not my stomping ground I thought I'd ping this > group for input. We are definitely going to make a visit to 1st Flight > either by air or land. While we are there. My son also informs me that we > HAVE to do some NC BarBQ while we are there. Other than that we'd love any > suggestions, particularly for fuel/rest stops & FBO's. > > > Deems > > N519PJ > > deemsrv10.com > ________________________________ Message 18 ____________________________________ Time: 08:32:47 PM PST US From: "DLM" Subject: RE: RV10-List: Trip East KBBG is a brand new facility last year; new runways, ILS, etc. I used the FBO there; rental cars are available at the terminal adjacent. -----Original Message----- From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Kelly McMullen Sent: Tuesday, September 13, 2011 7:21 PM Subject: Re: RV10-List: Trip East Depending on weather, you might consider southern route. Hot Springs AR is one potential stop. Or you can just follow I-10 to I-20 to I-30 to I-40 all the way to Knoxville, then aim south a bit for NC. If you do planned route, Springfield Branson FBO is pretty good and has a self serve at one end of the field, IIRC. I don't know anything about the new Branson airport. Depending on whether you plan on non-stop or not, Borger, BGD is a good fuel stop...I prefer it to Dalhart, although Dalhart is acceptable as well. On 9/13/2011 5:14 PM, Deems Davis wrote: > > Judy and I are heading out to the EastCoast from DVT. We are leaving > Thurs am. and plan to o'nite in Branson Mo. weather permitting, Then > on into Greenville NC. On Fri. We will spend the weekend with our son > and daughter in law and then head to FRG on Mon. We've made the trip > from DVT -OSH-FRG a couple of times and have a good idea of the what > to see and expect on the 'northen' route, but with our son recently > locating in NC it gives us an opportunity to make the trip a bigger > loop this time. > > So since the east coast is not my stomping ground I thought I'd ping > this group for input. We are definitely going to make a visit to 1st > Flight either by air or land. While we are there. My son also informs > me that we HAVE to do some NC BarBQ while we are there. Other than > that we'd love any suggestions, particularly for fuel/rest stops & FBO's. > > Deems > > N519PJ > > deemsrv10.com > > * > > > * ________________________________ Message 19 ____________________________________ Time: 09:04:13 PM PST US From: Jim Beyer Subject: Re: RV10-List: Trip East QWxzbyBjb25zaWRlciBzdG9wcGluZyBhdCBHYXN0b24ncyBSZXNvcnQgaW4gQXJrYW5zYXMsIEJl YXVtb250IEhvdGVsIGluIEthbnNhcywgb3IgTGFtYmVydCdzIENhZmUgaW4gU3ByaW5nZmllbGQs IE1pc3NvdXJpLiAgQWxsIGdyZWF0IHBsYWNlcyB0byBlYXQuICBIYXZlIGZ1biEgIEJlc3QsIEpp bQoKCgpTZW50IHZpYSBEcm9pZFgyIG9uIFZlcml6b24gV2lyZWxlc3PihKIKCi0tLS0tT3JpZ2lu YWwgbWVzc2FnZS0tLS0tCkZyb206IERlZW1zIERhdmlzIDxkZWVtc2RhdmlzQGNveC5uZXQ+ClRv OiBydjEwLWxpc3RAbWF0cm9uaWNzLmNvbQpTZW50OiBUdWUsIFNlcCAxMywgMjAxMSAyMzoyMzo0 NyBHTVQrMDA6MDAKU3ViamVjdDogUlYxMC1MaXN0OiBUcmlwIEVhc3QKCkp1ZHkgYW5kIEkgYXJl IGhlYWRpbmcgb3V0IHRvIHRoZSBFYXN0Q29hc3QgIGZyb20gRFZULiAgV2UgYXJlIGxlYXZpbmcg VGh1cnMKYW0uIGFuZCBwbGFuIHRvIG8nbml0ZSBpbiBCcmFuc29uIE1vLiB3ZWF0aGVyIHBlcm1p dHRpbmcsIFRoZW4gb24gaW50bwpHcmVlbnZpbGxlIE5DLiBPbiBGcmkuIFdlIHdpbGwgc3BlbmQg dGhlIHdlZWtlbmQgd2l0aCBvdXIgc29uIGFuZCBkYXVnaHRlcgppbiBsYXcgYW5kIHRoZW4gaGVh ZCB0byBGUkcgb24gTW9uLiBXZSd2ZSBtYWRlIHRoZSB0cmlwIGZyb20gRFZUIC1PU0gtRlJHIGEK Y291cGxlIG9mIHRpbWVzIGFuZCBoYXZlIGEgZ29vZCBpZGVhIG9mIHRoZSB3aGF0IHRvIHNlZSBh bmQgZXhwZWN0IG9uIHRoZQonbm9ydGhlbicgcm91dGUsIGJ1dCB3aXRoIG91ciBzb24gcmVjZW50 bHkgbG9jYXRpbmcgaW4gTkMgaXQgZ2l2ZXMgdXMgYW4Kb3Bwb3J0dW5pdHkgdG8gbWFrZSB0aGUg dHJpcCBhIGJpZ2dlciBsb29wIHRoaXMgdGltZS4KClNvIHNpbmNlIHRoZSBlYXN0IGNvYXN0IGlz IG5vdCBteSBzdG9tcGluZyBncm91bmQgSSB0aG91Z2h0IEknZCBwaW5nIHRoaXMKZ3JvdXAgZm9y IGlucHV0LiBXZSBhcmUgZGVmaW5pdGVseSBnb2luZyB0byBtYWtlIGEgdmlzaXQgdG8gMXN0IEZs aWdodAplaXRoZXIgYnkgYWlyIG9yIGxhbmQuIFdoaWxlIHdlIGFyZSB0aGVyZS4gTXkgc29uIGFs c28gaW5mb3JtcyBtZSB0aGF0IHdlCkhBVkUgdG8gZG8gc29tZSBOQyBCYXJCUSB3aGlsZSB3ZSBh cmUgdGhlcmUuICBPdGhlciB0aGFuIHRoYXQgd2UnZCBsb3ZlIGFueQpzdWdnZXN0aW9ucywgcGFy dGljdWxhcmx5IGZvciBmdWVsL3Jlc3Qgc3RvcHMgJiBGQk8ncy4gCgogCgpEZWVtcwoKTjUxOVBK CgpkZWVtc3J2MTAuY29tCgo ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message rv10-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/RV10-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/rv10-list Browse Digests http://www.matronics.com/digest/rv10-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.