---------------------------------------------------------- RV10-List Digest Archive --- Total Messages Posted Tue 11/22/11: 9 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 06:07 AM - kamagra soft (Ginnqqq) 2. 02:12 PM - Sealing the Oil Cooler (Phillip Perry) 3. 02:24 PM - Re: Sealing the Oil Cooler (Linn Walters) 4. 03:01 PM - Re: Sealing the Oil Cooler (Geoff Combs) 5. 03:20 PM - Re: Sealing the Oil Cooler (Robin Marks) 6. 03:20 PM - Re: Sealing the Oil Cooler (Byron&Donya) 7. 03:43 PM - Re: Sealing the Oil Cooler (Phillip Perry) 8. 04:20 PM - Re: Sealing the Oil Cooler (speckter@comcast.net) 9. 09:57 PM - Re: Sealing the Oil Cooler (David Leikam) ________________________________ Message 1 _____________________________________ Time: 06:07:52 AM PST US Subject: RV10-List: kamagra soft From: "Ginnqqq" any else info about that ? I will keep using Kamagra Soft (http://kamagrasoftmed.com/). I am well into my 60s and your celebrex (http://celebrexpill.com/) gave me what I lost: long lasting erection and delights of youth. My order arrived within 5 days in good condition. I received my medicine in time and I think that this is a sign of responsibility and professionalism. Thanks for such a good service and a great product. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=358798#358798 ________________________________ Message 2 _____________________________________ Time: 02:12:43 PM PST US Subject: RV10-List: Sealing the Oil Cooler From: Phillip Perry Last night I installed the oil cooler onto the airbox and noticed it's a very leaky setup. Attached is a photo of the *inside* of the airbox and you'll notice some big gaps on the corners and even a gap down the sides. Has anyone sealed these? I'm thinking of putting a fillet of red rtv along the edges and a blob in the corners to keep the air moving through the cooler and not around it. Phil ________________________________ Message 3 _____________________________________ Time: 02:24:10 PM PST US From: Linn Walters Subject: Re: RV10-List: Sealing the Oil Cooler On 11/22/2011 5:08 PM, Phillip Perry wrote: > Last night I installed the oil cooler onto the airbox and noticed it's > a very leaky setup. Attached is a photo of the *inside* of the airbox > and you'll notice some big gaps on the corners and even a gap down the > sides. > > Has anyone sealed these? I'm thinking of putting a fillet of red rtv > along the edges and a blob in the corners to keep the air moving > through the cooler and not around it. That's what I did. Linn > > Phil > > ________________________________ Message 4 _____________________________________ Time: 03:01:33 PM PST US From: "Geoff Combs" Subject: RE: RV10-List: Sealing the Oil Cooler Phil I sealed mine but used a silver RTV high temp which does not show as much as the red Geoff _____ From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Phillip Perry Sent: Tuesday, November 22, 2011 5:09 PM Subject: RV10-List: Sealing the Oil Cooler Last night I installed the oil cooler onto the airbox and noticed it's a very leaky setup. Attached is a photo of the *inside* of the airbox and you'll notice some big gaps on the corners and even a gap down the sides. Has anyone sealed these? I'm thinking of putting a fillet of red rtv along the edges and a blob in the corners to keep the air moving through the cooler and not around it. Phil ________________________________ Message 5 _____________________________________ Time: 03:20:57 PM PST US From: Robin Marks Subject: RE: RV10-List: Sealing the Oil Cooler Because Geoff's RV-10 looks amazing even from inside the oil cooler wedge! Robin Do Not Archive From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@m atronics.com] On Behalf Of Geoff Combs Sent: Tuesday, November 22, 2011 2:59 PM Subject: RE: RV10-List: Sealing the Oil Cooler Phil I sealed mine but used a silver RTV high temp which does not show as m uch as the red Geoff ________________________________ From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@m atronics.com] On Behalf Of Phillip Perry Sent: Tuesday, November 22, 2011 5:09 PM Subject: RV10-List: Sealing the Oil Cooler Last night I installed the oil cooler onto the airbox and noticed it's a ve ry leaky setup. Attached is a photo of the *inside* of the airbox and you' ll notice some big gaps on the corners and even a gap down the sides. Has anyone sealed these? I'm thinking of putting a fillet of red rtv along the edges and a blob in the corners to keep the air moving through the coo ler and not around it. Phil rsbooks.com> m> ________________________________ Message 6 _____________________________________ Time: 03:20:58 PM PST US From: "Byron&Donya" Subject: RE: RV10-List: Sealing the Oil Cooler That's what I did. Lot more of the red high temp RTV on the baffles and sealing around the engine as well. Byron N253RV still in phase one but loving it more each day. From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Phillip Perry Sent: Tuesday, November 22, 2011 5:09 PM Subject: RV10-List: Sealing the Oil Cooler Last night I installed the oil cooler onto the airbox and noticed it's a very leaky setup. Attached is a photo of the *inside* of the airbox and you'll notice some big gaps on the corners and even a gap down the sides. Has anyone sealed these? I'm thinking of putting a fillet of red rtv along the edges and a blob in the corners to keep the air moving through the cooler and not around it. Phil ________________________________ Message 7 _____________________________________ Time: 03:43:59 PM PST US Subject: Re: RV10-List: Sealing the Oil Cooler From: Phillip Perry I'm going to be hiding all my firewall awesomeness behind a split cowling and paint! One the topic of baffles and installing RTV. Has anyone found an applicator that's long (~12 Inches) and skinny (~3/16") for pumping the stuff into some pretty tight spots? It seems like there could be a pneumatic applicator or a mechanical plunger type that would get you into some pretty tight spots. On Tue, Nov 22, 2011 at 5:20 PM, Robin Marks wrote: > Because Geoff's RV-10 looks amazing even from inside the oil cooler > wedge!**** > > ** ** > > Robin**** > > Do Not Archive**** > > *From:* owner-rv10-list-server@matronics.com [mailto: > owner-rv10-list-server@matronics.com] *On Behalf Of *Geoff Combs > *Sent:* Tuesday, November 22, 2011 2:59 PM > *To:* rv10-list@matronics.com > *Subject:* RE: RV10-List: Sealing the Oil Cooler**** > > ** ** > > Phil I sealed mine but used a silver RTV high temp which does not show as > much as the red**** > > **** > > Geoff**** > > **** > > **** > > **** > > ** ** > ------------------------------ > > *From:* owner-rv10-list-server@matronics.com [mailto: > owner-rv10-list-server@matronics.com] *On Behalf Of *Phillip Perry > *Sent:* Tuesday, November 22, 2011 5:09 PM > *To:* rv10-list@matronics.com > *Subject:* RV10-List: Sealing the Oil Cooler**** > > Last night I installed the oil cooler onto the airbox and noticed it's a > very leaky setup. Attached is a photo of the *inside* of the airbox and > you'll notice some big gaps on the corners and even a gap down the sides. > > Has anyone sealed these? I'm thinking of putting a fillet of red rtv > along the edges and a blob in the corners to keep the air moving through > the cooler and not around it. > > Phil > > **** > > * * > > * * > > ==============**** sts This Month --**** And Get Some AWESOME FREE Gifts!) > **** ick on**** t**** d**** aeroelectric.com">www.aeroelectric.com**** > http://www.buildersbooks.com">www.buildersbooks.com**** .homebuilthelp.com > ">www.homebuilthelp.com**** bution">http://www.matronics.com/contribution* > *** b> bsp; -Matt Dralle, List Admin.**** ============= > **** V10-List Email Forum -**** > :p> /o:p> tor?RV10-List"> > http://www.matronics.com/Navigator?RV10-List**** ==============****bsp; - MATRONICS WEB FORUMS - > **** :p> tp://forums.matronics.com**** ==============**** bsp; - List > Contribution Web Site -**** e> bsp; -Matt Dralle, List > Admin.**** bution">http://www.matronics.com/contribution****============= > **** > > * * > > * > > * > > ________________________________ Message 8 _____________________________________ Time: 04:20:40 PM PST US From: speckter@comcast.net Subject: Re: RV10-List: Sealing the Oil Cooler Grab a plastic straw from Mc Donalds and cram it on the end of your applica tor and reach as far as you want. Gary Specketer ----- Original Message ----- From: "Phillip Perry" Sent: Tuesday, November 22, 2011 6:41:00 PM Subject: Re: RV10-List: Sealing the Oil Cooler I'm going to be hiding all my firewall awesomeness behind a split cowling a nd paint! One the topic of baffles and installing RTV.=C2- Has anyone found an appl icator that's long (~12 Inches) and skinny (~3/16") for pumping the stuff i nto some pretty tight spots?=C2- It seems like there could be a pneumatic applicator or a mechanical plunger type that would get you into some prett y tight spots. On Tue, Nov 22, 2011 at 5:20 PM, Robin Marks < robin@painttheweb.com > wrot e: Because Geoff's RV-10 looks amazing even from inside the oil cooler wedge! Robin Do Not Archive From: owner-rv10-list-server@matronics.com [mailto: owner-rv10-list-server@ matronics.com ] On Behalf Of Geoff Combs Sent: Tuesday, November 22, 2011 2:59 PM Subject: RE: RV10-List: Sealing the Oil Cooler Phil I sealed mine but used a silver RTV high temp which does not show as m uch as the red Geoff From: owner-rv10-list-server@matronics.com [mailto: owner-rv10-list-server@ matronics.com ] On Behalf Of Phillip Perry Sent: Tuesday, November 22, 2011 5:09 PM Subject: RV10-List: Sealing the Oil Cooler Last night I installed the oil cooler onto the airbox and noticed it's a ve ry leaky setup.=C2- Attached is a photo of the *inside* of the airbox and you'll notice some big gaps on the corners and even a gap down the sides. Has anyone sealed these?=C2- I'm thinking of putting a fillet of red rtv along the edges and a blob in the corners to keep the air moving through th e cooler and not around it. Phil =C2- =C2- ============== sts This Month -- And Get Some AWESOME FREE Gifts!) ick on t d aeroelectric.com "> www.aeroel ectric.com http://www.buildersbooks.com "> www.buildersbooks.com . homebuil thelp.com "> www.homebuilthelp.com bution"> http://www.matronics.com/contri bution b> bsp;=C2-=C2-=C2-=C2-=C2-=C2-=C2-=C2- =C2-=C2- =C2-=C2-=C2-=C2-=C2-=C2-=C2-=C2--Matt Dralle, List Admin. ============== V10-List Email Forum - > :p> /o: p> tor?RV10-List"> http://www.matronics.com/Navigator?RV10-List === =========== bsp;=C2-=C2-=C2- - MATRONICS WEB FO RUMS - :p> tp:// forums.matronics.com ============ == bsp;=C2- - List Contribution Web Site - e> bsp;=C2-=C2-=C2- =C2-=C2-=C2-=C2-=C2-=C2-=C2-=C2-=C2-=C2-=C2-=C2-=C2 -=C2-=C2- -Matt Dralle, List Admin. bution"> http://www.matronics.com /contribution ============== =C2- _blank">www .aeroelectric.com .com" target="_blank">www.buildersbooks.com ="_blank" >www.homebuilthelp.com _blank">http://www.matronics.com/contribution get= "_blank">http://www.matronics.com/Navigator?RV10-List tp://forums.matronics .com _blank">http://www.matronics.com/contribution == ________________________________ Message 9 _____________________________________ Time: 09:57:48 PM PST US Subject: Re: RV10-List: Sealing the Oil Cooler From: David Leikam I did the same. Dave Leikam do not archive On Nov 22, 2011, at 4:08 PM, Phillip Perry wrote: > Last night I installed the oil cooler onto the airbox and noticed it's a very leaky setup. Attached is a photo of the *inside* of the airbox and you'll notice some big gaps on the corners and even a gap down the sides. > > Has anyone sealed these? I'm thinking of putting a fillet of red rtv along the edges and a blob in the corners to keep the air moving through the cooler and not around it. > > Phil > > > ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message rv10-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/RV10-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/rv10-list Browse Digests http://www.matronics.com/digest/rv10-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.