Today's Message Index:
----------------------
1. 05:54 AM - Trimming Cabin top (billz)
2. 06:39 AM - Re: Trimming Cabin top (Dave Saylor)
3. 10:21 AM - Re: Tail Ballast (was Battery placement) (Carlos Trigo)
4. 11:02 AM - Re: Tail Ballast (was Battery placement) (Dave Saylor)
5. 11:23 AM - Re: Tail Ballast (was Battery placement) (Alan Mekler)
6. 12:15 PM - Re: Tail Ballast (was Battery placement) (Michael Kraus)
7. 12:37 PM - Re: Tail Ballast (was Battery placement) (Robin Marks)
8. 12:43 PM - Re: Tail Ballast (was Battery placement) (Rob Kermanj)
9. 01:06 PM - Re: Tail Ballast (was Battery placement) (Bob Turner)
10. 01:23 PM - Re: Tail Ballast (was Battery placement) (Tim Olson)
11. 01:40 PM - Re: Tail Ballast (was Battery placement) (Kelly McMullen)
12. 03:21 PM - Re: Tail Ballast (was Battery placement) (g.combs)
13. 04:40 PM - Re: Tail Ballast (was Battery placement) (Miller John)
14. 05:27 PM - Re: Tail Ballast (was Battery placement) (Bill Watson)
15. 06:31 PM - Re: Tail Ballast (was Battery placement) (Michael Kraus)
16. 07:30 PM - belts (DLM)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Trimming Cabin top |
I've got everything trimmed except the area around the left door. The bottom of
the left door opening looks like it needs to be trimmed another 1/8 in? This
will allow the top to drop the 1/8 in needed in the area just behind the door.
My concern is making the area on the bottom of the door too thin. Perhaps
I'm overly concerned, since there will be filling done in that area.
Looking for ideas from those who have been through this, already.
Thanks
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=362654#362654
Attachments:
http://forums.matronics.com//files/img_1470_208.jpg
http://forums.matronics.com//files/img_1469_562.jpg
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Trimming Cabin top |
How thin will it end up if you take off that last 1/8"? There's not much
if any of the vertical flange left by the time you're done. You may even
end up taking off material from the bottom of the horizontal portion, that
is, the section with the bevel on the outboard edge. Look at the entire
surface across the bottom where the cabin cover bolts to the door sill and
make sure you don't have a high spot that's interfering and keeping the
cover from settling down to onto the sill.
Dave Saylor
AirCrafters
140 Aviation Way
Watsonville, CA 95076
831-722-9141 Shop
831-750-0284 Cell
On Sat, Jan 7, 2012 at 5:47 AM, billz <billz@roadrunner.com> wrote:
>
> I've got everything trimmed except the area around the left door. The
> bottom of the left door opening looks like it needs to be trimmed another
> 1/8 in? This will allow the top to drop the 1/8 in needed in the area just
> behind the door. My concern is making the area on the bottom of the door
> too thin. Perhaps I'm overly concerned, since there will be filling done
> in that area.
>
> Looking for ideas from those who have been through this, already.
> Thanks
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=362654#362654
>
>
> Attachments:
>
> http://forums.matronics.com//files/img_1470_208.jpg
> http://forums.matronics.com//files/img_1469_562.jpg
>
>
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | : RV10-List:Tail Ballast (was Battery placement) |
Folks
Thanks everybody for all the answers about the Battery placement.
I will surely follow the plans, and keep the battery (or batteries) in the
tail.
Now, another thread was suggested within the answers, which is Ballast.
Further having the battery in the tail, some -10 flyers (with IO540) seem to
be using ballast in the tail, when flying solo. I heard of something like 50
Lbs..
How is this ballast materialised? What is the solution everybody uses?
Carlos
_____
From: owner-rv10-list-server@matronics.com
[mailto:owner-rv10-list-server@matronics.com] On Behalf Of
speckter@comcast.net
Sent: quinta-feira, 5 de Janeiro de 2012 20:03
Subject: Re: RV10-List: Battery placement
Most folks are putting it in the tail per the plans. It seems to be the
best place to make the CG come out where it needs to be.
Gary Specketer
_____
From: "Carlos Trigo" <trigo@mail.telepac.pt>
Sent: Thursday, January 5, 2012 2:18:50 PM
Subject: RV10-List: Battery placement
Hello everybody
I am helping a buddy who is beginning the construction of a -10.
Reading the Manual, I became aware that the plans determine the battery to
be placed in the tail.
Has everybody gone this way, or did any of you placed the battery elsewhere?
Regards
Carlos Trigo
Message 4
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: : RV10-List:Tail Ballast (was Battery placement) |
I keep a 24-pound survival kit back there, plus a light cover and the
towbar, maybe another 5.
Dave Saylor
AirCrafters
140 Aviation Way
Watsonville, CA 95076
831-722-9141 Shop
831-750-0284 Cell
On Sat, Jan 7, 2012 at 10:15 AM, Carlos Trigo <trigo@mail.telepac.pt> wrote
:
> **
>
> Folks****
>
> ** **
>
> Thanks everybody for all the answers about the **Battery** placement.****
>
> I will surely follow the plans, and keep the battery (or batteries) in th
e
> tail.****
>
> ** **
>
> Now, another thread was suggested within the answers, which is Ballast.**
*
> *
>
> Further having the battery in the tail, some -10 flyers (with IO540) seem
> to be using ballast in the tail, when flying solo. I heard of something
> like 50 Lbs. ****
>
> How is this ballast materialised? What is the solution everybody uses?***
*
>
> ** **
>
> Carlos****
>
> ** **
>
> ** **
> ------------------------------
>
> *From:* owner-rv10-list-server@matronics.com [mailto:
> owner-rv10-list-server@matronics.com] *On Behalf Of *speckter@comcast.net
> *Sent:* quinta-feira, 5 de Janeiro de 2012 20:03
> *To:* rv10-list@matronics.com
> *Subject:* Re: RV10-List: **Battery** placement****
>
> ** **
>
> Most folks are putting it in the tail per the plans. It seems to be the
> best place to make the CG come out where it needs to be.****
>
> ****
>
> Gary Specketer****
> ------------------------------
>
> *From: *"Carlos Trigo" <trigo@mail.telepac.pt>
> *To: *rv10-list@matronics.com
> *Sent: *Thursday, January 5, 2012 2:18:50 PM
> *Subject: *RV10-List: Battery placement****
>
> Hello everybody****
>
> ****
>
> I am helping a buddy who is beginning the construction of a -10.****
>
> Reading the Manual, I became aware that the plans determine the battery t
o
> be placed in the tail.****
>
> ****
>
> Has everybody gone this way, or did any of you placed the battery
> elsewhere?****
>
> ****
>
> ****
>
> Regards****
>
> Carlos Trigo****
>
> * *
>
> * *
>
> * *
>
> *
>
===========
===========
===========
===========
> *
>
>
Message 5
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | : RV10-List:Tail Ballast (was Battery placement) |
Carlos,
I use 2 25lb lead shot bags.
Alan
N668G
From: owner-rv10-list-server@matronics.com
[mailto:owner-rv10-list-server@matronics.com] On Behalf Of Carlos Trigo
Sent: Saturday, January 07, 2012 1:15 PM
Subject: RE: RV10-List:Tail Ballast (was Battery placement)
Folks
Thanks everybody for all the answers about the Battery placement.
I will surely follow the plans, and keep the battery (or batteries) in the
tail.
Now, another thread was suggested within the answers, which is Ballast.
Further having the battery in the tail, some -10 flyers (with IO540) seem to
be using ballast in the tail, when flying solo. I heard of something like 50
Lbs..
How is this ballast materialised? What is the solution everybody uses?
Carlos
_____
From: owner-rv10-list-server@matronics.com
[mailto:owner-rv10-list-server@matronics.com] On Behalf Of
speckter@comcast.net
Sent: quinta-feira, 5 de Janeiro de 2012 20:03
Subject: Re: RV10-List: Battery placement
Most folks are putting it in the tail per the plans. It seems to be the
best place to make the CG come out where it needs to be.
Gary Specketer
_____
From: "Carlos Trigo" <trigo@mail.telepac.pt>
Sent: Thursday, January 5, 2012 2:18:50 PM
Subject: RV10-List: Battery placement
Hello everybody
I am helping a buddy who is beginning the construction of a -10.
Reading the Manual, I became aware that the plans determine the battery to
be placed in the tail.
Has everybody gone this way, or did any of you placed the battery elsewhere?
Regards
Carlos Trigo
Message 6
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: : RV10-List:Tail Ballast (was Battery placement) |
I keep 2 cases of water. Then if I get thirsty , I'm all set.
Sent from my iPhone
On Jan 7, 2012, at 12:55 PM, Dave Saylor <dave.saylor.aircrafters@gmail.com>
wrote:
> I keep a 24-pound survival kit back there, plus a light cover and the towb
ar, maybe another 5.
>
> Dave Saylor
> AirCrafters
> 140 Aviation Way
> Watsonville, CA 95076
> 831-722-9141 Shop
> 831-750-0284 Cell
>
>
> On Sat, Jan 7, 2012 at 10:15 AM, Carlos Trigo <trigo@mail.telepac.pt> wrot
e:
> Folks
>
>
>
> Thanks everybody for all the answers about the Battery placement.
>
> I will surely follow the plans, and keep the battery (or batteries) in the
tail.
>
>
>
> Now, another thread was suggested within the answers, which is Ballast.
>
> Further having the battery in the tail, some -10 flyers (with IO540) seem t
o be using ballast in the tail, when flying solo. I heard of something like 5
0 Lbs.
>
> How is this ballast materialised? What is the solution everybody uses?
>
>
>
> Carlos
>
>
>
>
>
> From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@
matronics.com] On Behalf Of speckter@comcast.net
> Sent: quinta-feira, 5 de Janeiro de 2012 20:03
> To: rv10-list@matronics.com
> Subject: Re: RV10-List: Battery placement
>
>
>
> Most folks are putting it in the tail per the plans. It seems to be the b
est place to make the CG come out where it needs to be.
>
>
>
> Gary Specketer
>
> From: "Carlos Trigo" <trigo@mail.telepac.pt>
> To: rv10-list@matronics.com
> Sent: Thursday, January 5, 2012 2:18:50 PM
> Subject: RV10-List: Battery placement
>
> Hello everybody
>
>
>
> I am helping a buddy who is beginning the construction of a -10.
>
> Reading the Manual, I became aware that the plans determine the battery to
be placed in the tail.
>
>
>
> Has everybody gone this way, or did any of you placed the battery elsewher
e?
>
>
>
>
>
> Regards
>
> Carlos Trigo
>
>
>
>
>
>
> get="_blank">http://www.matronics.com/Navigator?RV10-List
> tp://forums.matronics.com
> _blank">http://www.matronics.com/contribution
>
>
>
>
==========================
=========
==========================
=========
==========================
=========
==========================
=========
>
Message 7
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | : RV10-List:Tail Ballast (was Battery placement) |
SSBpbml0aWFsbHkgZmxldyB3aXRoIHNvbWUgYmFsbGFzdCBpbiBiYWNrLiBBdCBzb21lIHBvaW50
IH41MCBob3VycyBpbiBJIHJlbW92ZWQgdGhlIGFkZGl0aW9uYWwgd2VpZ2h0IHRvIGZseSBmdWxs
eSBsb2FkZWQgYW5kIG5ldmVyIHB1dCB0aGUgYmFsbGFzdCBiYWNrLiBJIGZseSB3aXRoIG1heWJl
IDE1IyBvZiB0b29scyBhbmQgaGFyZHdhcmUgYmFjayB0aGVyZSBhbmQgbmV2ZXIgaGF2ZSBhbiBp
c3N1ZSB3aXRoIGZvcndhcmQgd2VpZ2h0LiA5MCUgb2YgbXkgZmx5aW5nIGlzIHNvbG8uDQoNClJv
YmluDQoNCkZyb206IG93bmVyLXJ2MTAtbGlzdC1zZXJ2ZXJAbWF0cm9uaWNzLmNvbSBbbWFpbHRv
Om93bmVyLXJ2MTAtbGlzdC1zZXJ2ZXJAbWF0cm9uaWNzLmNvbV0gT24gQmVoYWxmIE9mIE1pY2hh
ZWwgS3JhdXMNClNlbnQ6IFNhdHVyZGF5LCBKYW51YXJ5IDA3LCAyMDEyIDExOjUxIEFNDQpUbzog
cnYxMC1saXN0QG1hdHJvbmljcy5jb20NClN1YmplY3Q6IFJlOiBSVjEwLUxpc3Q6VGFpbCBCYWxs
YXN0ICh3YXMgQmF0dGVyeSBwbGFjZW1lbnQpDQoNCkkga2VlcCAyIGNhc2VzIG9mIHdhdGVyLiAg
VGhlbiBpZiBJIGdldCB0aGlyc3R5ICwgSSdtIGFsbCBzZXQuDQoNClNlbnQgZnJvbSBteSBpUGhv
bmUNCg0KT24gSmFuIDcsIDIwMTIsIGF0IDEyOjU1IFBNLCBEYXZlIFNheWxvciA8ZGF2ZS5zYXls
b3IuYWlyY3JhZnRlcnNAZ21haWwuY29tPG1haWx0bzpkYXZlLnNheWxvci5haXJjcmFmdGVyc0Bn
bWFpbC5jb20+PiB3cm90ZToNCkkga2VlcCBhIDI0LXBvdW5kIHN1cnZpdmFsIGtpdCBiYWNrIHRo
ZXJlLCBwbHVzIGEgbGlnaHQgY292ZXIgYW5kIHRoZSB0b3diYXIsIG1heWJlIGFub3RoZXIgNS4N
Cg0KRGF2ZSBTYXlsb3INCkFpckNyYWZ0ZXJzDQoxNDAgQXZpYXRpb24gV2F5DQpXYXRzb252aWxs
ZSwgQ0EgOTUwNzYNCjgzMS03MjItOTE0MSBTaG9wDQo4MzEtNzUwLTAyODQgQ2VsbA0KDQpPbiBT
YXQsIEphbiA3LCAyMDEyIGF0IDEwOjE1IEFNLCBDYXJsb3MgVHJpZ28gPHRyaWdvQG1haWwudGVs
ZXBhYy5wdDxtYWlsdG86dHJpZ29AbWFpbC50ZWxlcGFjLnB0Pj4gd3JvdGU6DQpGb2xrcw0KDQpU
aGFua3MgZXZlcnlib2R5IGZvciBhbGwgdGhlIGFuc3dlcnMgYWJvdXQgdGhlIEJhdHRlcnkgcGxh
Y2VtZW50Lg0KSSB3aWxsIHN1cmVseSBmb2xsb3cgdGhlIHBsYW5zLCBhbmQga2VlcCB0aGUgYmF0
dGVyeSAob3IgYmF0dGVyaWVzKSBpbiB0aGUgdGFpbC4NCg0KTm93LCBhbm90aGVyIHRocmVhZCB3
YXMgc3VnZ2VzdGVkIHdpdGhpbiB0aGUgYW5zd2Vycywgd2hpY2ggaXMgQmFsbGFzdC4NCkZ1cnRo
ZXIgaGF2aW5nIHRoZSBiYXR0ZXJ5IGluIHRoZSB0YWlsLCBzb21lIC0xMCBmbHllcnMgKHdpdGgg
SU81NDApIHNlZW0gdG8gYmUgdXNpbmcgYmFsbGFzdCBpbiB0aGUgdGFpbCwgd2hlbiBmbHlpbmcg
c29sby4gSSBoZWFyZCBvZiBzb21ldGhpbmcgbGlrZSA1MCBMYnPigKYuDQpIb3cgaXMgdGhpcyBi
YWxsYXN0IG1hdGVyaWFsaXNlZD8gV2hhdCBpcyB0aGUgc29sdXRpb24gZXZlcnlib2R5IHVzZXM/
DQoNCkNhcmxvcw0KDQoNCl9fX19fX19fX19fX19fX19fX19fX19fX19fX19fX19fDQpGcm9tOiBv
d25lci1ydjEwLWxpc3Qtc2VydmVyQG1hdHJvbmljcy5jb208bWFpbHRvOm93bmVyLXJ2MTAtbGlz
dC1zZXJ2ZXJAbWF0cm9uaWNzLmNvbT4gW21haWx0bzpvd25lci1ydjEwLWxpc3Qtc2VydmVyQG1h
dHJvbmljcy5jb208bWFpbHRvOm93bmVyLXJ2MTAtbGlzdC1zZXJ2ZXJAbWF0cm9uaWNzLmNvbT5d
IE9uIEJlaGFsZiBPZiBzcGVja3RlckBjb21jYXN0Lm5ldDxtYWlsdG86c3BlY2t0ZXJAY29tY2Fz
dC5uZXQ+DQpTZW50OiBxdWludGEtZmVpcmEsIDUgZGUgSmFuZWlybyBkZSAyMDEyIDIwOjAzDQpU
bzogcnYxMC1saXN0QG1hdHJvbmljcy5jb208bWFpbHRvOnJ2MTAtbGlzdEBtYXRyb25pY3MuY29t
Pg0KU3ViamVjdDogUmU6IFJWMTAtTGlzdDogQmF0dGVyeSBwbGFjZW1lbnQNCg0KDQpNb3N0IGZv
bGtzIGFyZSBwdXR0aW5nIGl0IGluIHRoZSB0YWlsIHBlciB0aGUgcGxhbnMuICBJdCBzZWVtcyB0
byBiZSB0aGUgYmVzdCBwbGFjZSB0byBtYWtlIHRoZSBDRyBjb21lIG91dCB3aGVyZSBpdCBuZWVk
cyB0byBiZS4NCg0KDQoNCkdhcnkgU3BlY2tldGVyDQoNCl9fX19fX19fX19fX19fX19fX19fX19f
X19fX19fX19fDQoNCkZyb206ICJDYXJsb3MgVHJpZ28iIDx0cmlnb0BtYWlsLnRlbGVwYWMucHQ8
bWFpbHRvOnRyaWdvQG1haWwudGVsZXBhYy5wdD4+DQpUbzogcnYxMC1saXN0QG1hdHJvbmljcy5j
b208bWFpbHRvOnJ2MTAtbGlzdEBtYXRyb25pY3MuY29tPg0KU2VudDogVGh1cnNkYXksIEphbnVh
cnkgNSwgMjAxMiAyOjE4OjUwIFBNDQpTdWJqZWN0OiBSVjEwLUxpc3Q6IEJhdHRlcnkgcGxhY2Vt
ZW50DQpIZWxsbyBldmVyeWJvZHkNCg0KSSBhbSBoZWxwaW5nIGEgYnVkZHkgd2hvIGlzIGJlZ2lu
bmluZyB0aGUgY29uc3RydWN0aW9uIG9mIGEgLTEwLg0KUmVhZGluZyB0aGUgTWFudWFsLCBJIGJl
Y2FtZSBhd2FyZSB0aGF0IHRoZSBwbGFucyBkZXRlcm1pbmUgdGhlIGJhdHRlcnkgdG8gYmUgcGxh
Y2VkIGluIHRoZSB0YWlsLg0KDQpIYXMgZXZlcnlib2R5IGdvbmUgdGhpcyB3YXksIG9yIGRpZCBh
bnkgb2YgeW91IHBsYWNlZCB0aGUgYmF0dGVyeSBlbHNld2hlcmU/DQoNCg0KUmVnYXJkcw0KQ2Fy
bG9zIFRyaWdvDQoNCg0KDQoNCg0KDQoNCg0KDQoNCg0KZ2V0PSJfYmxhbmsiPmh0dHA6Ly93d3cu
bWF0cm9uaWNzLmNvbS9OYXZpZ2F0b3I/UlYxMC1MaXN0DQoNCnRwOi8vZm9ydW1zLm1hdHJvbmlj
cy5jb20NCg0KX2JsYW5rIj5odHRwOi8vd3d3Lm1hdHJvbmljcy5jb20vY29udHJpYnV0aW9uDQoN
Cg0KDQoNCg0KDQoNCg0KPT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT0NCg0KOi8v
d3d3Lm1hdHJvbmljcy5jb20vTmF2aWdhdG9yP1JWMTAtTGlzdA0KDQo9PT09PT09PT09PT09PT09
PT09PT09PT09PT09PT09PT09PQ0KDQpjcy5jb20NCg0KPT09PT09PT09PT09PT09PT09PT09PT09
PT09PT09PT09PT0NCg0KbWF0cm9uaWNzLmNvbS9jb250cmlidXRpb24NCg0KPT09PT09PT09PT09
PT09PT09PT09PT09PT09PT09PT09PT0NCg0KDQoNCg0KDQoNCg0KXy09PT09PT09PT09PT09PT09
PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT0NCg0KXy09ICAgICAg
ICAgIC0gVGhlIFJWMTAtTGlzdCBFbWFpbCBGb3J1bSAtDQoNCl8tPSBVc2UgdGhlIE1hdHJvbmlj
cyBMaXN0IEZlYXR1cmVzIE5hdmlnYXRvciB0byBicm93c2UNCg0KXy09IHRoZSBtYW55IExpc3Qg
dXRpbGl0aWVzIHN1Y2ggYXMgTGlzdCBVbi9TdWJzY3JpcHRpb24sDQoNCl8tPSBBcmNoaXZlIFNl
YXJjaCAmIERvd25sb2FkLCA3LURheSBCcm93c2UsIENoYXQsIEZBUSwNCg0KXy09IFBob3Rvc2hh
cmUsIGFuZCBtdWNoIG11Y2ggbW9yZToNCg0KXy09DQoNCl8tPSAgIC0tPiBodHRwOi8vd3d3Lm1h
dHJvbmljcy5jb20vTmF2aWdhdG9yP1JWMTAtTGlzdA0KDQpfLT0NCg0KXy09PT09PT09PT09PT09
PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT0NCg0KXy09ICAg
ICAgICAgICAgICAgLSBNQVRST05JQ1MgV0VCIEZPUlVNUyAtDQoNCl8tPSBTYW1lIGdyZWF0IGNv
bnRlbnQgYWxzbyBhdmFpbGFibGUgdmlhIHRoZSBXZWIgRm9ydW1zIQ0KDQpfLT0NCg0KXy09ICAg
LS0+IGh0dHA6Ly9mb3J1bXMubWF0cm9uaWNzLmNvbQ0KDQpfLT0NCg0KXy09PT09PT09PT09PT09
PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT0NCg0KXy09ICAg
ICAgICAgICAgIC0gTGlzdCBDb250cmlidXRpb24gV2ViIFNpdGUgLQ0KDQpfLT0gIFRoYW5rIHlv
dSBmb3IgeW91ciBnZW5lcm91cyBzdXBwb3J0IQ0KDQpfLT0gICAgICAgICAgICAgICAgICAgICAg
ICAgICAgICAtTWF0dCBEcmFsbGUsIExpc3QgQWRtaW4uDQoNCl8tPSAgIC0tPiBodHRwOi8vd3d3
Lm1hdHJvbmljcy5jb20vY29udHJpYnV0aW9uDQoNCl8tPT09PT09PT09PT09PT09PT09PT09PT09
PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09DQoNCg0K
Message 8
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: : RV10-List:Tail Ballast (was Battery placement) |
I use no ballast at all. Do not have any problems.
do not archive
Rob Kermanj
On Jan 7, 2012, at 2:18 PM, Alan Mekler wrote:
> Carlos,
> I use 2 25lb lead shot bags.
> Alan
> N668G
>
> From: owner-rv10-list-server@matronics.com
[mailto:owner-rv10-list-server@matronics.com] On Behalf Of Carlos Trigo
> Sent: Saturday, January 07, 2012 1:15 PM
> To: rv10-list@matronics.com
> Subject: RE: RV10-List:Tail Ballast (was Battery placement)
>
> Folks
>
> Thanks everybody for all the answers about the Battery placement.
> I will surely follow the plans, and keep the battery (or batteries) in
the tail.
>
> Now, another thread was suggested within the answers, which is
Ballast.
> Further having the battery in the tail, some -10 flyers (with IO540)
seem to be using ballast in the tail, when flying solo. I heard of
something like 50 Lbs=85.
> How is this ballast materialised? What is the solution everybody uses?
>
> Carlos
>
>
> From: owner-rv10-list-server@matronics.com
[mailto:owner-rv10-list-server@matronics.com] On Behalf Of
speckter@comcast.net
> Sent: quinta-feira, 5 de Janeiro de 2012 20:03
> To: rv10-list@matronics.com
> Subject: Re: RV10-List: Battery placement
>
> Most folks are putting it in the tail per the plans. It seems to be
the best place to make the CG come out where it needs to be.
>
> Gary Specketer
>
> From: "Carlos Trigo" <trigo@mail.telepac.pt>
> To: rv10-list@matronics.com
> Sent: Thursday, January 5, 2012 2:18:50 PM
> Subject: RV10-List: Battery placement
>
> Hello everybody
>
> I am helping a buddy who is beginning the construction of a -10.
> Reading the Manual, I became aware that the plans determine the
battery to be placed in the tail.
>
> Has everybody gone this way, or did any of you placed the battery
elsewhere?
>
>
> Regards
> Carlos Trigo
>
>
>
>
>
> http://www.matronics.com/Navigator?RV10-List
> http://forums.matronics.com
> http://www.matronics.com/contribution
>
>
>
>
>
Message 9
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: : RV10-List:Tail Ballast (was Battery placement) |
I keep a tool box back there.
Note, you want to be able to remove the extra weight. The -10 is not like a 182,
where it is nearly impossible to be out of cg. I'm a lighter pilot (160 lbs)
and need 20 lbs in the cargo area when solo. But if I really want to load the
plane up to gross, the cg can go too far aft (especially at zero fuel) unless
I'm careful.
--------
Bob Turner
RV-10 QB
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=362673#362673
Message 10
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: : RV10-List:Tail Ballast (was Battery placement) |
Ditto except for me it's not often I'm solo....but I don't add anything when
solo and it's perfectly fine.
Tim
On Jan 7, 2012, at 2:31 PM, Robin Marks <robin@PaintTheWeb.com> wrote:
> I initially flew with some ballast in back. At some point ~50 hours in I r
emoved the additional weight to fly fully loaded and never put the ballast b
ack. I fly with maybe 15# of tools and hardware back there and never have an
issue with forward weight. 90% of my flying is solo.
>
> Robin
>
> From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@
matronics.com] On Behalf Of Michael Kraus
> Sent: Saturday, January 07, 2012 11:51 AM
> To: rv10-list@matronics.com
> Subject: Re: RV10-List:Tail Ballast (was Battery placement)
>
> I keep 2 cases of water. Then if I get thirsty , I'm all set.
>
> Sent from my iPhone
>
> On Jan 7, 2012, at 12:55 PM, Dave Saylor <dave.saylor.aircrafters@gmail.co
m> wrote:
>
> I keep a 24-pound survival kit back there, plus a light cover and the towb
ar, maybe another 5.
>
> Dave Saylor
> AirCrafters
> 140 Aviation Way
> Watsonville, CA 95076
> 831-722-9141 Shop
> 831-750-0284 Cell
>
>
> On Sat, Jan 7, 2012 at 10:15 AM, Carlos Trigo <trigo@mail.telepac.pt> wrot
e:
> Folks
>
> Thanks everybody for all the answers about the Battery placement.
> I will surely follow the plans, and keep the battery (or batteries) in the
tail.
>
> Now, another thread was suggested within the answers, which is Ballast.
> Further having the battery in the tail, some -10 flyers (with IO540) seem t
o be using ballast in the tail, when flying solo. I heard of something like 5
0 Lbs.
> How is this ballast materialised? What is the solution everybody uses?
>
> Carlos
>
>
> From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@
matronics.com] On Behalf Of speckter@comcast.net
> Sent: quinta-feira, 5 de Janeiro de 2012 20:03
> To: rv10-list@matronics.com
> Subject: Re: RV10-List: Battery placement
>
> Most folks are putting it in the tail per the plans. It seems to be the b
est place to make the CG come out where it needs to be.
>
>
>
> Gary Specketer
>
> From: "Carlos Trigo" <trigo@mail.telepac.pt>
> To: rv10-list@matronics.com
> Sent: Thursday, January 5, 2012 2:18:50 PM
> Subject: RV10-List: Battery placement
>
> Hello everybody
>
> I am helping a buddy who is beginning the construction of a -10.
> Reading the Manual, I became aware that the plans determine the battery to
be placed in the tail.
>
> Has everybody gone this way, or did any of you placed the battery elsewher
e?
>
>
> Regards
> Carlos Trigo
>
>
>
>
>
> get="_blank">http://www.matronics.com/Navigator?RV10-List
> tp://forums.matronics.com
> _blank">http://www.matronics.com/contribution
>
>
>
>
> =========================
=========
> ://www.matronics.com/Navigator?RV10-List
> =========================
=========
> cs.com
> =========================
=========
> matronics.com/contribution
> =========================
=========
>
>
>
==========================
=========
==========================
=========
==========================
=========
==========================
=========
>
> )=EF=BD=EF=BD=DF=A2{l=EF=BD7=EF=BDr=EF=BDh=EF=BDM4=EF
=BDM=1Fi=C7=9C=EF=BD=EF=BD=EF=BDz=EF=BD=EF=BD=EF=BD=EF=BD
.=EF=BD'=EF=BDN=17=EF=BDW]=0B=EF=BD=EF=BDD=EF=BD=EF=BD=EF
=BD=16=EF=BD=EF=BDK=1E=EF=BD=17=EF=BDj=EF=BD=EF=BD',.+-
=15=E6=AD=BA=EF=BD=EF=BD5=EF=BD=81=ABh=EF=BD=EF=BD=1B=EF
=BD=EF=BD,z=EF=BD^=EF=BD=EF=BD=EF=BD.+-=EF=BD=D8=A5=EF=BD
=D8=9E=EF=BD=CB=9C=EF=BD=EF=BD=0B=EF=BD=EF=BDT=EF=BD=EF
=BDn=EF=BD+=EF=BD=EF=BDb=EF=BDp+r=18=EF=BDy'=EF=BD=EF=BD
=EF=BDC=EF=BD =E5=A1=A7{ =EF=BD=EF=BD=EF=BD=EF=BD,x(Z
=EF=BDP=10>=1A-=EF=BD=EF=BDZ=EF=BD=EF=BDvk=EF=BD=EF=BDk
=EF=BD=EF=BDj+y=EF=BDky=EF=BDm=EF=BD=EF=BD=EF=BD=EF=BD
=0C&j=EF=BD=EF=BD',r=EF=BD=EF=BD5=EF=BD=81=ABh=EF=BD=15
u=D0=B8=EF=BD=EF=BD=1Bm=EF=BD=EF=BD=EF=BD=EF=BD =EF
=BD=EF=BD=EF=BD'=EF=BD=EF=BD=1C=EF=BDo=EF=BDj=EF=BDj
=EF=BD+E]t.+-=EF=BDM=13=EF=BD $=EF=BD=10=11NEC=12I=EF=BD=EF
=BD=EF=BD=EF=BD=EF=BD=EF=BD=EF=BD'=EF=BD=EF=BD=EF=BD
j[(j=EF=BD=EF=BDz=EF=BD=17=EF=BDy=EF=BDh=EF=BD=EF=BDj=1A
=EF=BD~=1Bm=EF=BD=EF=BD=DF=A2=EF=BD=EF=BD=EF=BDf=EF=BD=EF
=BD=EF=BD=EF=BDr=EF=BD(=EF=BD=1Bm=EF=BD=EF=BD=DF=A2=EF
=BD=EF=BD=EF=BDf=EF=BD=EF=BD=EF=BD=EF=BDr=EF=BD(=EF=BD
=EF=BD=EF=BDB=EF=BD{k=EF=BD=EF=BD=EF=BD=EF=BD=EF=BD=EF
=BDy=EF=BD=EF=BD=EF=BD=EF=BD=EF=BDjy2=EF=BD=EF=BD=EF
=BD*.=EF=BD=07=EF=BDz=EF=BD.=EF=BD=CB=A9=EF=BD=EF=BD=EF
=BD1=EF=BDm=0E=EF=BD=EF=BD=EF=BD=EF=BD=EF=BD=EF=BD=1D
=EF=BD)=DA=86=EF=BD=EF=BD=EF=BD=EF=BDi=EF=BD=EF=BD0=EF
=BDf=EF=BD=EF=BD=EF=BD=EF=BDr=EF=BD(=EF=BD=EF=BD(=EF
=BD=EF=BD=EF=BDn=EF=BDb=EF=BDxm=EF=BD=EF=BD=EF=BD=EF
=BD=0C&j=EF=BD=EF=BD',r=EF=BD=EF=BDr=EF=BD=EF=BD&=EF=BD
*'=EF=BD=EF=BD=EF=BD=EF=BD'=EF=BD=EF=BDk{=EF=BD=EF=BD
w/=EF=BDi
Message 11
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: : RV10-List:Tail Ballast (was Battery placement) |
That or a collapsible 5 gal water jug should do the trick. Nothing to lose
when you want to shed the weight.
On Sat, Jan 7, 2012 at 12:50 PM, Michael Kraus
<n223rv@wolflakeairport.net>wrote:
> I keep 2 cases of water. Then if I get thirsty , I'm all set.
>
>
> On Sat, Jan 7, 2012 at 10:15 AM, Carlos Trigo <trigo@mail.telepac.pt>wrot
e:
>
>> **
>>
>> Folks****
>>
>> ** **
>>
>> Thanks everybody for all the answers about the **Battery** placement.***
*
>>
>> I will surely follow the plans, and keep the battery (or batteries) in
>> the tail.****
>>
>> ** **
>>
>> Now, another thread was suggested within the answers, which is Ballast.*
*
>> **
>>
>> Further having the battery in the tail, some -10 flyers (with IO540) see
m
>> to be using ballast in the tail, when flying solo. I heard of something
>> like 50 Lbs=85. ****
>>
>> How is this ballast materialised? What is the solution everybody uses?**
*
>> *
>>
>> ** **
>>
>> Carlos****
>>
>> ** **
>>
>> ** **
>> ------------------------------
>>
>> *From:* owner-rv10-list-server@matronics.com [mailto:
>> owner-rv10-list-server@matronics.com] *On Behalf Of *speckter@comcast.ne
t
>> *Sent:* quinta-feira, 5 de Janeiro de 2012 20:03
>> *To:* rv10-list@matronics.com
>> *Subject:* Re: RV10-List: **Battery** placement****
>>
>> ** **
>>
>> Most folks are putting it in the tail per the plans. It seems to be the
>> best place to make the CG come out where it needs to be.****
>>
>> ****
>>
>> Gary Specketer****
>> ------------------------------
>>
>> *From: *"Carlos Trigo" <trigo@mail.telepac.pt>
>> *To: *rv10-list@matronics.com
>> *Sent: *Thursday, January 5, 2012 2:18:50 PM
>> *Subject: *RV10-List: Battery placement****
>>
>> Hello everybody****
>>
>> ****
>>
>> I am helping a buddy who is beginning the construction of a -10.****
>>
>> Reading the Manual, I became aware that the plans determine the battery
>> to be placed in the tail.****
>>
>> ****
>>
>> Has everybody gone this way, or did any of you placed the battery
>> elsewhere?****
>>
>> ****
>>
>> ****
>>
>> Regards****
>>
>> Carlos Trigo****
>>
>> * *
>>
>> * *
>>
>> * *
>>
>> *
>>
>> get="_blank">http://www.matronics.com/Navigator?RV10-List
>>
>> tp://forums.matronics.com
>> _blank">http://www.matronics.com/contribution
>> *
>>
>>
> *
>
> ========================
> ://www.matronics.com/Navigator?RV10-List
> ========================
===========cs.com
> ========================
===========matronics.com/contribution
> ========================
> *
>
> *
>
===========
===========
===========
===========
> *
>
>
Message 12
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: : RV10-List:Tail Ballast (was Battery placement) |
As Robin and Tim said
Ditto for me
Geoff
Sent from my iPhone Geoff
On Jan 7, 2012, at 4:15 PM, Tim Olson <Tim@MyRV10.com> wrote:
> Ditto except for me it's not often I'm solo....but I don't add anything wh
en solo and it's perfectly fine.
> Tim
>
>
> On Jan 7, 2012, at 2:31 PM, Robin Marks <robin@PaintTheWeb.com> wrote:
>
>> I initially flew with some ballast in back. At some point ~50 hours in I r
emoved the additional weight to fly fully loaded and never put the ballast b
ack. I fly with maybe 15# of tools and hardware back there and never have an
issue with forward weight. 90% of my flying is solo.
>>
>> Robin
>>
>> From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server
@matronics.com] On Behalf Of Michael Kraus
>> Sent: Saturday, January 07, 2012 11:51 AM
>> To: rv10-list@matronics.com
>> Subject: Re: RV10-List:Tail Ballast (was Battery placement)
>>
>> I keep 2 cases of water. Then if I get thirsty , I'm all set.
>>
>> Sent from my iPhone
>>
>> On Jan 7, 2012, at 12:55 PM, Dave Saylor <dave.saylor.aircrafters@gmail.c
om> wrote:
>>
>> I keep a 24-pound survival kit back there, plus a light cover and the tow
bar, maybe another 5.
>>
>> Dave Saylor
>> AirCrafters
>> 140 Aviation Way
>> Watsonville, CA 95076
>> 831-722-9141 Shop
>> 831-750-0284 Cell
>>
>>
>> On Sat, Jan 7, 2012 at 10:15 AM, Carlos Trigo <trigo@mail.telepac.pt> wro
te:
>> Folks
>>
>> Thanks everybody for all the answers about the Battery placement.
>> I will surely follow the plans, and keep the battery (or batteries) in th
e tail.
>>
>> Now, another thread was suggested within the answers, which is Ballast.
>> Further having the battery in the tail, some -10 flyers (with IO540) seem
to be using ballast in the tail, when flying solo. I heard of something lik
e 50 Lbs.
>> How is this ballast materialised? What is the solution everybody uses?
>>
>> Carlos
>>
>>
>> From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server
@matronics.com] On Behalf Of speckter@comcast.net
>> Sent: quinta-feira, 5 de Janeiro de 2012 20:03
>> To: rv10-list@matronics.com
>> Subject: Re: RV10-List: Battery placement
>>
>> Most folks are putting it in the tail per the plans. It seems to be the b
est place to make the CG come out where it needs to be.
>>
>>
>>
>> Gary Specketer
>>
>> From: "Carlos Trigo" <trigo@mail.telepac.pt>
>> To: rv10-list@matronics.com
>> Sent: Thursday, January 5, 2012 2:18:50 PM
>> Subject: RV10-List: Battery placement
>>
>> Hello everybody
>>
>> I am helping a buddy who is beginning the construction of a -10.
>> Reading the Manual, I became aware that the plans determine the battery t
o be placed in the tail.
>>
>> Has everybody gone this way, or did any of you placed the battery elsewhe
re?
>>
>>
>> Regards
>> Carlos Trigo
>>
>>
>>
>>
>>
>> get="_blank">http://www.matronics.com/Navigator?RV10-List
>> tp://forums.matronics.com
>> _blank">http://www.matronics.com/contribution
>>
>>
>>
>>
>> =========================
=========
>> ://www.matronics.com/Navigator?RV10-List
>> =========================
=========
>> cs.com
>> =========================
=========
>> matronics.com/contribution
>> =========================
=========
>>
>>
>>
>> =========================
============= 10-List Email Forum - p> o:p> or?RV1
0-List">http://www.matronics.com/Navigator?RV10-List ========
==========================
==== sp; - MATRONICS WEB FORUMS - p> p://forums.matronics.com =
==========================
=========== sp; - List Contribution Web Site - > sp;
-Matt Dralle, List Admin. ution">http://www.matronics.com/
contribution =====================
================
>>
>> )=EF=BD=EF=BD=DF=A2{l=EF=BD7=EF=BDr=EF=BDh=EF=BDM4=EF
=BDM=1Fi=C7=9C=EF=BD=EF=BD=EF=BDz=EF=BD=EF=BD=EF=BD=EF=BD
.=EF=BD'=EF=BDN=17=EF=BDW]=0B=EF=BD=EF=BDD=EF=BD=EF=BD=EF
=BD=16=EF=BD=EF=BDK=1E=EF=BD=17=EF=BDj=EF=BD=EF=BD',.+-
=15=E6=AD=BA=EF=BD=EF=BD5=EF=BD=81=ABh=EF=BD=EF=BD=1B=EF
=BD=EF=BD,z=EF=BD^=EF=BD=EF=BD=EF=BD.+-=EF=BD=D8=A5=EF=BD
=D8=9E=EF=BD=CB=9C=EF=BD=EF=BD=0B=EF=BD=EF=BDT=EF=BD=EF
=BDn=EF=BD+=EF=BD=EF=BDb=EF=BDp+r=18=EF=BDy'=EF=BD=EF=BD
=EF=BDC=EF=BD =E5=A1=A7{ =EF=BD=EF=BD=EF=BD=EF=BD,x(Z
=EF=BDP=10>=1A-=EF=BD=EF=BDZ=EF=BD=EF=BDvk=EF=BD=EF=BDk
=EF=BD=EF=BDj+y=EF=BDky=EF=BDm=EF=BD=EF=BD=EF=BD=EF=BD
=0C&j=EF=BD=EF=BD',r=EF=BD=EF=BD5=EF=BD=81=ABh=EF=BD=15
u=D0=B8=EF=BD=EF=BD=1Bm=EF=BD=EF=BD=EF=BD=EF=BD =EF
=BD=EF=BD=EF=BD'=EF=BD=EF=BD=1C=EF=BDo=EF=BDj=EF=BDj
=EF=BD+E]t.+-=EF=BDM=13=EF=BD $=EF=BD=10=11NEC=12I=EF=BD=EF
=BD=EF=BD=EF=BD=EF=BD=EF=BD=EF=BD'=EF=BD=EF=BD=EF=BD
j[(j=EF=BD=EF=BDz=EF=BD=17=EF=BDy=EF=BDh=EF=BD=EF=BDj=1A
=EF=BD~=1Bm=EF=BD=EF=BD=DF=A2=EF=BD=EF=BD=EF=BDf=EF=BD=EF
=BD=EF=BD=EF=BDr=EF=BD(=EF=BD=1Bm=EF=BD=EF=BD=DF=A2=EF
=BD=EF=BD=EF=BDf=EF=BD=EF=BD=EF=BD=EF=BDr=EF=BD(=EF=BD
=EF=BD=EF=BDB=EF=BD{k=EF=BD=EF=BD=EF=BD=EF=BD=EF=BD=EF
=BDy=EF=BD=EF=BD=EF=BD=EF=BD=EF=BDjy2=EF=BD=EF=BD=EF
=BD*.=EF=BD=07=EF=BDz=EF=BD.=EF=BD=CB=A9=EF=BD=EF=BD=EF
=BD1=EF=BDm=0E=EF=BD=EF=BD=EF=BD=EF=BD=EF=BD=EF=BD=1D
=EF=BD)=DA=86=EF=BD=EF=BD=EF=BD=EF=BDi=EF=BD=EF=BD0=EF
=BDf=EF=BD=EF=BD=EF=BD=EF=BDr=EF=BD(=EF=BD=EF=BD(=EF
=BD=EF=BD=EF=BDn=EF=BDb=EF=BDxm=EF=BD=EF=BD=EF=BD=EF
=BD=0C&j=EF=BD=EF=BD',r=EF=BD=EF=BDr=EF=BD=EF=BD&=EF=BD
*'=EF=BD=EF=BD=EF=BD=EF=BD'=EF=BD=EF=BDk{=EF=BD=EF=BD
w/=EF=BDi
>
>
==========================
=========
==========================
=========
==========================
=========
==========================
=========
>
Message 13
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: : RV10-List:Tail Ballast (was Battery placement) |
I don't have any ballast in my baggage compartment either when flying
solo, and no problems either.
grumpy
do not archive
On Jan 7, 2012, at 5:13 PM, g.combs wrote:
> As Robin and Tim said
>
> Ditto for me
>
> Geoff
>
> Sent from my iPhone Geoff
>
>
> On Jan 7, 2012, at 4:15 PM, Tim Olson <Tim@MyRV10.com> wrote:
>
>> Ditto except for me it's not often I'm solo....but I don't add
anything when solo and it's perfectly fine.
>> Tim
>>
>>
>> On Jan 7, 2012, at 2:31 PM, Robin Marks <robin@PaintTheWeb.com>
wrote:
>>
>>> I initially flew with some ballast in back. At some point ~50 hours
in I removed the additional weight to fly fully loaded and never put the
ballast back. I fly with maybe 15# of tools and hardware back there and
never have an issue with forward weight. 90% of my flying is solo.
>>>
>>> Robin
>>>
>>> From: owner-rv10-list-server@matronics.com
[mailto:owner-rv10-list-server@matronics.com] On Behalf Of Michael Kraus
>>> Sent: Saturday, January 07, 2012 11:51 AM
>>> To: rv10-list@matronics.com
>>> Subject: Re: RV10-List:Tail Ballast (was Battery placement)
>>>
>>> I keep 2 cases of water. Then if I get thirsty , I'm all set.
>>>
>>> Sent from my iPhone
>>>
>>> On Jan 7, 2012, at 12:55 PM, Dave Saylor
<dave.saylor.aircrafters@gmail.com> wrote:
>>>
>>> I keep a 24-pound survival kit back there, plus a light cover and
the towbar, maybe another 5.
>>>
>>> Dave Saylor
>>> AirCrafters
>>> 140 Aviation Way
>>> Watsonville, CA 95076
>>> 831-722-9141 Shop
>>> 831-750-0284 Cell
>>>
>>>
>>> On Sat, Jan 7, 2012 at 10:15 AM, Carlos Trigo
<trigo@mail.telepac.pt> wrote:
>>> Folks
>>>
>>> Thanks everybody for all the answers about the Battery placement.
>>> I will surely follow the plans, and keep the battery (or batteries)
in the tail.
>>>
>>> Now, another thread was suggested within the answers, which is
Ballast.
>>> Further having the battery in the tail, some -10 flyers (with IO540)
seem to be using ballast in the tail, when flying solo. I heard of
something like 50 Lbs.
>>> How is this ballast materialised? What is the solution everybody
uses?
>>>
>>> Carlos
>>>
>>>
>>> From: owner-rv10-list-server@matronics.com
[mailto:owner-rv10-list-server@matronics.com] On Behalf Of
speckter@comcast.net
>>> Sent: quinta-feira, 5 de Janeiro de 2012 20:03
>>> To: rv10-list@matronics.com
>>> Subject: Re: RV10-List: Battery placement
>>>
>>> Most folks are putting it in the tail per the plans. It seems to be
the best place to make the CG come out where it needs to be.
>>>
>>>
>>>
>>> Gary Specketer
>>>
>>> From: "Carlos Trigo" <trigo@mail.telepac.pt>
>>> To: rv10-list@matronics.com
>>> Sent: Thursday, January 5, 2012 2:18:50 PM
>>> Subject: RV10-List: Battery placement
>>>
>>> Hello everybody
>>>
>>> I am helping a buddy who is beginning the construction of a -10.
>>> Reading the Manual, I became aware that the plans determine the
battery to be placed in the tail.
>>>
>>> Has everybody gone this way, or did any of you placed the battery
elsewhere?
>>>
>>>
>>> Regards
>>> Carlos Trigo
>>>
>>>
>>>
>>>
>>>
>>> get="_blank">http://www.matronics.com/Navigator?RV10-List
>>> tp://forums.matronics.com
>>> _blank">http://www.matronics.com/contribution
>>>
>>>
>>>
>>>
>>> ========================
>>> ://www.matronics.com/Navigator?RV10-List
>>> ========================
>>> cs.com
>>> ========================
>>> matronics.com/contribution
>>> ========================
>>>
>>>
>>>
>>> ========================
============== 10-List Email Forum - p> o:p>
or?RV10-List">http://www.matronics.com/Navigator?RV10-List
============= sp; - MATRONICS WEB FORUMS -
p> p://forums.matronics.com ================
====================== sp;
- List Contribution Web Site - > sp; -Matt Dralle,
List Admin. ution">http://www.matronics.com/contribution
============
>>>
>>>
)=EF=BD=EF=BD=DF=A2{l=EF=BD7=EF=BDr=EF=BDh=EF=BDM4=EF
=BDM=1Fi=C7=9C=EF=BD=EF=BD=EF=BDz=EF=BD=EF=BD=EF=BD=EF
=BD.=EF=BD'=EF=BDN=17=EF=BDW]=0B
=EF=BD=EF=BDD=EF=BD=EF=BD=EF=BD=16=EF=BD=EF=BDK=1E=EF
=BD=17=EF=BDj=EF=BD=EF=BD',.+-=15=E6=AD=BA=EF=BD=EF=BD5=EF
=BD=81=ABh=EF=BD=EF=BD=1B=EF=BD=EF=BD,z=EF=BD^=EF=BD
=EF=BD=EF=BD.+-=EF=BD=D8=A5=EF=BD=D8=9E=EF=BD=CB=9C=EF=BD
=EF=BD=0B=EF=BD=EF=BDT=EF=BD=EF=BDn=EF=BD+=EF=BD=EF
=BDb=EF=BDp+r=18=EF=BDy'=EF=BD=EF=BD=EF=BDC=EF=BD
=E5=A1=A7{
=EF=BD=EF=BD=EF=BD=EF=BD,x(Z=EF=BDP=10>=1A-=EF=BD=EF=BD
Z=EF=BD=EF=BDvk=EF=BD=EF=BDk=EF=BD=EF=BDj+y=EF=BDky=EF
=BDm=EF=BD=EF=BD=EF=BD=EF=BD=0C
&j=EF=BD=EF=BD',r=EF=BD=EF=BD5=EF=BD=81=ABh=EF=BD=15u
=D0=B8=EF=BD=EF=BD=1Bm=EF=BD=EF=BD=EF=BD=EF=BD
=EF=BD=EF=BD=EF=BD'=EF=BD=EF=BD=1C=EF=BDo=EF=BDj=EF
=BDj=EF=BD+E]t.+-=EF=BDM=13=EF=BD
$=EF=BD=10=11NEC=12I=EF=BD=EF=BD=EF=BD=EF=BD=EF=BD=EF
=BD=EF=BD'=EF=BD=EF=BD=EF=BDj[(j=EF=BD=EF=BDz=EF=BD=17
=EF=BDy=EF=BDh=EF=BD=EF=BDj=1A=EF=BD~=1Bm=EF=BD=EF=BD
=DF=A2=EF=BD=EF=BD=EF=BDf=EF=BD=EF=BD=EF=BD=EF=BDr=EF
=BD(=EF=BD=1Bm=EF=BD=EF=BD=DF=A2=EF=BD=EF=BD=EF=BDf=EF
=BD=EF=BD=EF=BD=EF=BDr=EF=BD(=EF=BD=EF=BD=EF=BDB=EF
=BD{k=EF=BD=EF=BD=EF=BD=EF=BD=EF=BD=EF=BDy=EF=BD=EF
=BD=EF=BD=EF=BD=EF=BDjy2=EF=BD=EF=BD=EF=BD*.=EF=BD
=07=EF=BDz=EF=BD.=EF=BD=CB=A9=EF=BD=EF=BD=EF=BD1=EF=BD
m=0E=EF=BD=EF=BD=EF=BD=EF=BD=EF=BD=EF=BD=1D=EF=BD)=DA
=86=EF=BD=EF=BD=EF=BD=EF=BDi=EF=BD=EF=BD0=EF=BDf=EF
=BD=EF=BD=EF=BD=EF=BDr=EF=BD(=EF=BD=EF=BD(=EF=BD=EF
=BD=EF=BDn=EF=BDb=EF=BDxm=EF=BD=EF=BD=EF=BD=EF=BD=0C
&j=EF=BD=EF=BD',r=EF=BD=EF=BDr=EF=BD=EF=BD&=EF=BD*'=EF
=BD=EF=BD=EF=BD=EF=BD'=EF=BD=EF=BDk{=EF=BD=EF=BDw/
=EF=BDi
>>
>>
>> ========================
>>
ref="http://www.matronics.com/Navigator?RV10-List">http://www.matronics.
com/Navigator?RV10-List
>> ========================
>> ums.matronics.com">http://forums.matronics.com
>> ========================
>>
http://www.matronics.com/contribution">http://www.matronics.com/contributi
on
>> ========================
>>
>
>
>
Message 14
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: : RV10-List:Tail Ballast (was Battery placement) |
No ballast here either. Stick is fully back in the flare when solo and that
seems nice.
A lot of stuff can end up behind the rear bulkhead... 2 batts, strobe owner s
upply, AP servo, dual AHRS, dual magnetometers, and ELT in my case (and I su
spect in most others). Do it per plans, add goodies as desired, liberally u
se optional Vans mounting plates for behind he bulkhead area, then do W&B. W
orked great with no ballast required here.
Bill
Sent from my iPad
On Jan 7, 2012, at 7:32 PM, Miller John <gengrumpy@aol.com> wrote:
> I don't have any ballast in my baggage compartment either when flying solo
, and no problems either.
>
> grumpy
>
> do not archive
>
> On Jan 7, 2012, at 5:13 PM, g.combs wrote:
>
>> As Robin and Tim said
>>
>> Ditto for me
>>
>> Geoff
>>
>> Sent from my iPhone Geoff
>>
>>
>> On Jan 7, 2012, at 4:15 PM, Tim Olson <Tim@MyRV10.com> wrote:
>>
>>> Ditto except for me it's not often I'm solo....but I don't add anything w
hen solo and it's perfectly fine.
>>> Tim
>>>
>>>
>>> On Jan 7, 2012, at 2:31 PM, Robin Marks <robin@PaintTheWeb.com> wrote:
>>>
>>>> I initially flew with some ballast in back. At some point ~50 hours in I
removed the additional weight to fly fully loaded and never put the ballast
back. I fly with maybe 15# of tools and hardware back there and never have a
n issue with forward weight. 90% of my flying is solo.
>>>>
>>>> Robin
>>>>
>>>> From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-serv
er@matronics.com] On Behalf Of Michael Kraus
>>>> Sent: Saturday, January 07, 2012 11:51 AM
>>>> To: rv10-list@matronics.com
>>>> Subject: Re: RV10-List:Tail Ballast (was Battery placement)
>>>>
>>>> I keep 2 cases of water. Then if I get thirsty , I'm all set.
>>>>
>>>> Sent from my iPhone
>>>>
>>>> On Jan 7, 2012, at 12:55 PM, Dave Saylor <dave.saylor.aircrafters@gmail
.com> wrote:
>>>>
>>>> I keep a 24-pound survival kit back there, plus a light cover and the t
owbar, maybe another 5.
>>>>
>>>> Dave Saylor
>>>> AirCrafters
>>>> 140 Aviation Way
>>>> Watsonville, CA 95076
>>>> 831-722-9141 Shop
>>>> 831-750-0284 Cell
>>>>
>>>>
>>>> On Sat, Jan 7, 2012 at 10:15 AM, Carlos Trigo <trigo@mail.telepac.pt> w
rote:
>>>> Folks
>>>>
>>>> Thanks everybody for all the answers about the Battery placement.
>>>> I will surely follow the plans, and keep the battery (or batteries) in t
he tail.
>>>>
>>>> Now, another thread was suggested within the answers, which is Ballast.
>>>> Further having the battery in the tail, some -10 flyers (with IO540) se
em to be using ballast in the tail, when flying solo. I heard of something l
ike 50 Lbs.
>>>> How is this ballast materialised? What is the solution everybody uses?
>>>>
>>>> Carlos
>>>>
>>>>
>>>> From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-serv
er@matronics.com] On Behalf Of speckter@comcast.net
>>>> Sent: quinta-feira, 5 de Janeiro de 2012 20:03
>>>> To: rv10-list@matronics.com
>>>> Subject: Re: RV10-List: Battery placement
>>>>
>>>> Most folks are putting it in the tail per the plans. It seems to be th
e best place to make the CG come out where it needs to be.
>>>>
>>>>
>>>>
>>>> Gary Specketer
>>>>
>>>> From: "Carlos Trigo" <trigo@mail.telepac.pt>
>>>> To: rv10-list@matronics.com
>>>> Sent: Thursday, January 5, 2012 2:18:50 PM
>>>> Subject: RV10-List: Battery placement
>>>>
>>>> Hello everybody
>>>>
>>>> I am helping a buddy who is beginning the construction of a -10.
>>>> Reading the Manual, I became aware that the plans determine the battery
to be placed in the tail.
>>>>
>>>> Has everybody gone this way, or did any of you placed the battery elsew
here?
>>>>
>>>>
>>>> Regards
>>>> Carlos Trigo
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> get="_blank">http://www.matronics.com/Navigator?RV10-List
>>>> tp://forums.matronics.com
>>>> _blank">http://www.matronics.com/contribution
>>>>
>>>>
>>>>
>>>>
>>>> ========================
>>>> ://www.matronics.com/Navigator?RV10-List
>>>> ========================
>>>> cs.com
>>>> ========================
>>>> matronics.com/contribution
>>>> ========================
>>>>
>>>>
>>>>
>>>> ============= 10-List Email Forum - p> o:p> o
r?RV10-List">http://www.matronics.com/Navigator?RV10-List ======
======= sp; - MATRONICS WEB FORUMS - p> p://forums.matronic
s.com ============= sp; - List Contribution Web S
ite - > sp; -Matt Dralle, List Admin. ution">http://www.ma
tronics.com/contribution ============
>>>>
>>>> )=EF=BD=EF=BD=DF=A2{l=EF=BD7=EF=BDr=EF=BDh=EF=BDM4=EF
=BDM=1Fi=C7=9C=EF=BD=EF=BD=EF=BDz=EF=BD=EF=BD=EF=BD=EF
=BD.=EF=BD'=EF=BDN=17=EF=BDW]=0B=EF=BD=EF=BDD=EF=BD=EF=BD
=EF=BD=16=EF=BD=EF=BDK=1E=EF=BD=17=EF=BDj=EF=BD=EF=BD',
.+-=15=E6=AD=BA=EF=BD=EF=BD5=EF=BD=81=ABh=EF=BD=EF=BD=1B=EF
=BD=EF=BD,z=EF=BD^=EF=BD=EF=BD=EF=BD.+-=EF=BD=D8=A5=EF
=BD=D8=9E=EF=BD=CB=9C=EF=BD=EF=BD=0B=EF=BD=EF=BDT=EF=BD=EF
=BDn=EF=BD+=EF=BD=EF=BDb=EF=BDp+r=18=EF=BDy'=EF=BD=EF
=BD=EF=BDC=EF=BD =E5=A1=A7{ =EF=BD=EF=BD=EF=BD=EF=BD,x(Z
=EF=BDP=10>=1A-=EF=BD=EF=BDZ=EF=BD=EF=BDvk=EF=BD=EF=BDk
=EF=BD=EF=BDj+y=EF=BDky=EF=BDm=EF=BD=EF=BD=EF=BD=EF=BD
=0C&j=EF=BD=EF=BD',r=EF=BD=EF=BD5=EF=BD=81=ABh=EF=BD=15
u=D0=B8=EF=BD=EF=BD=1Bm=EF=BD=EF=BD=EF=BD=EF=BD =EF
=BD=EF=BD=EF=BD'=EF=BD=EF=BD=1C=EF=BDo=EF=BDj=EF=BDj
=EF=BD+E]t.+-=EF=BDM=13=EF=BD $=EF=BD=10=11NEC=12I=EF=BD=EF
=BD=EF=BD=EF=BD=EF=BD=EF=BD=EF=BD'=EF=BD=EF=BD=EF=BD
j[(j=EF=BD=EF=BDz=EF=BD=17=EF=BDy=EF=BDh=EF=BD=EF=BDj=1A
=EF=BD~=1Bm=EF=BD=EF=BD=DF=A2=EF=BD=EF=BD=EF=BDf=EF=BD=EF
=BD=EF=BD=EF=BDr=EF=BD(=EF=BD=1Bm=EF=BD=EF=BD=DF=A2=EF
=BD=EF=BD=EF=BDf=EF=BD=EF=BD=EF=BD=EF=BDr=EF=BD(=EF=BD
=EF=BD=EF=BDB=EF=BD{k=EF=BD=EF=BD=EF=BD=EF=BD=EF=BD=EF
=BDy=EF=BD=EF=BD=EF=BD=EF=BD=EF=BDjy2=EF=BD=EF=BD=EF
=BD*.=EF=BD=07=EF=BDz=EF=BD.=EF=BD=CB=A9=EF=BD=EF=BD=EF
=BD1=EF=BDm=0E=EF=BD=EF=BD=EF=BD=EF=BD=EF=BD=EF=BD=1D
=EF=BD)=DA=86=EF=BD=EF=BD=EF=BD=EF=BDi=EF=BD=EF=BD0=EF
=BDf=EF=BD=EF=BD=EF=BD=EF=BDr=EF=BD(=EF=BD=EF=BD(=EF
=BD=EF=BD=EF=BDn=EF=BDb=EF=BDxm=EF=BD=EF=BD=EF=BD=EF
=BD=0C&j=EF=BD=EF=BD',r=EF=BD=EF=BDr=EF=BD=EF=BD&=EF=BD
*'=EF=BD=EF=BD=EF=BD=EF=BD'=EF=BD=EF=BDk{=EF=BD=EF=BD
w/=EF=BDi
>>>
>>>
>>> =========
>>> ref="http://www.matronics.com/Navigator?RV10-List">http://www.matronic
s.com/Navigator?RV10-List
>>> =========
>>> ums.matronics.com">http://forums.matronics.com
>>> =========
>>> http://www.matronics.com/contribution">http://www.matronics.com/contribu
tion
>>> =========
>>>
>>
>>
>> href="http://www.matronics.com/Navigator?RV10-List">http://www.matronic
s.com/Navigator?RV10-List
>> href="http://forums.matronics.com/">http://forums.matronics.com
>> href="http://www.matronics.com/contribution">http://www.matronics.com/c
ontribution
>>
>
>
>
==========================
=========
==========================
=========
==========================
=========
==========================
=========
>
Message 15
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: : RV10-List:Tail Ballast (was Battery placement) |
Ok, so I'm going to chime in here. On my -10 there is no ballast that is re
quired, but with 2 cases of water while flying solo allows me a much better f
lare on landing. Without it, the plane lands much flatter. Is it required?
No, does it feel and land better? Yes. YMMV
-Mike Kraus
Sent from my iPhone
On Jan 7, 2012, at 7:20 PM, Bill Watson <mauledriver@nc.rr.com> wrote:
> No ballast here either. Stick is fully back in the flare when solo and th
at seems nice.
>
> A lot of stuff can end up behind the rear bulkhead... 2 batts, strobe owne
r supply, AP servo, dual AHRS, dual magnetometers, and ELT in my case (and I
suspect in most others). Do it per plans, add goodies as desired, liberall
y use optional Vans mounting plates for behind he bulkhead area, then do W&B
. Worked great with no ballast required here.
>
> Bill
>
> Sent from my iPad
>
> On Jan 7, 2012, at 7:32 PM, Miller John <gengrumpy@aol.com> wrote:
>
>> I don't have any ballast in my baggage compartment either when flying sol
o, and no problems either.
>>
>> grumpy
>>
>> do not archive
>>
>> On Jan 7, 2012, at 5:13 PM, g.combs wrote:
>>
>>> As Robin and Tim said
>>>
>>> Ditto for me
>>>
>>> Geoff
>>>
>>> Sent from my iPhone Geoff
>>>
>>>
>>> On Jan 7, 2012, at 4:15 PM, Tim Olson <Tim@MyRV10.com> wrote:
>>>
>>>> Ditto except for me it's not often I'm solo....but I don't add anything
when solo and it's perfectly fine.
>>>> Tim
>>>>
>>>>
>>>> On Jan 7, 2012, at 2:31 PM, Robin Marks <robin@PaintTheWeb.com> wrote:
>>>>
>>>>> I initially flew with some ballast in back. At some point ~50 hours in
I removed the additional weight to fly fully loaded and never put the balla
st back. I fly with maybe 15# of tools and hardware back there and never hav
e an issue with forward weight. 90% of my flying is solo.
>>>>>
>>>>> Robin
>>>>>
>>>>> From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-ser
ver@matronics.com] On Behalf Of Michael Kraus
>>>>> Sent: Saturday, January 07, 2012 11:51 AM
>>>>> To: rv10-list@matronics.com
>>>>> Subject: Re: RV10-List:Tail Ballast (was Battery placement)
>>>>>
>>>>> I keep 2 cases of water. Then if I get thirsty , I'm all set.
>>>>>
>>>>> Sent from my iPhone
>>>>>
>>>>> On Jan 7, 2012, at 12:55 PM, Dave Saylor <dave.saylor.aircrafters@gmai
l.com> wrote:
>>>>>
>>>>> I keep a 24-pound survival kit back there, plus a light cover and the t
owbar, maybe another 5.
>>>>>
>>>>> Dave Saylor
>>>>> AirCrafters
>>>>> 140 Aviation Way
>>>>> Watsonville, CA 95076
>>>>> 831-722-9141 Shop
>>>>> 831-750-0284 Cell
>>>>>
>>>>>
>>>>> On Sat, Jan 7, 2012 at 10:15 AM, Carlos Trigo <trigo@mail.telepac.pt> w
rote:
>>>>> Folks
>>>>>
>>>>> Thanks everybody for all the answers about the Battery placement.
>>>>> I will surely follow the plans, and keep the battery (or batteries) in
the tail.
>>>>>
>>>>> Now, another thread was suggested within the answers, which is Ballast
.
>>>>> Further having the battery in the tail, some -10 flyers (with IO540) s
eem to be using ballast in the tail, when flying solo. I heard of something l
ike 50 Lbs.
>>>>> How is this ballast materialised? What is the solution everybody uses?
>>>>>
>>>>> Carlos
>>>>>
>>>>>
>>>>> From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-ser
ver@matronics.com] On Behalf Of speckter@comcast.net
>>>>> Sent: quinta-feira, 5 de Janeiro de 2012 20:03
>>>>> To: rv10-list@matronics.com
>>>>> Subject: Re: RV10-List: Battery placement
>>>>>
>>>>> Most folks are putting it in the tail per the plans. It seems to be t
he best place to make the CG come out where it needs to be.
>>>>>
>>>>>
>>>>>
>>>>> Gary Specketer
>>>>>
>>>>> From: "Carlos Trigo" <trigo@mail.telepac.pt>
>>>>> To: rv10-list@matronics.com
>>>>> Sent: Thursday, January 5, 2012 2:18:50 PM
>>>>> Subject: RV10-List: Battery placement
>>>>>
>>>>> Hello everybody
>>>>>
>>>>> I am helping a buddy who is beginning the construction of a -10.
>>>>> Reading the Manual, I became aware that the plans determine the batter
y to be placed in the tail.
>>>>>
>>>>> Has everybody gone this way, or did any of you placed the battery else
where?
>>>>>
>>>>>
>>>>> Regards
>>>>> Carlos Trigo
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> get="_blank">http://www.matronics.com/Navigator?RV10-List
>>>>> tp://forums.matronics.com
>>>>> _blank">http://www.matronics.com/contribution
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> ========================
>>>>> ://www.matronics.com/Navigator?RV10-List
>>>>> ========================
>>>>> cs.com
>>>>> ========================
>>>>> matronics.com/contribution
>>>>> ========================
>>>>>
>>>>>
>>>>>
>>>>> ============= 10-List Email Forum - p> o:p> o
r?RV10-List">http://www.matronics.com/Navigator?RV10-List ======
======= sp; - MATRONICS WEB FORUMS - p> p://forums.matronic
s.com ============= sp; - List Contribution Web S
ite - > sp; -Matt Dralle, List Admin. ution">http://www.ma
tronics.com/contribution ============
>>>>>
>>>>> )=EF=BD=EF=BD=DF=A2{l=EF=BD7=EF=BDr=EF=BDh=EF=BDM4=EF
=BDM=1Fi=C7=9C=EF=BD=EF=BD=EF=BDz=EF=BD=EF=BD=EF=BD=EF
=BD.=EF=BD'=EF=BDN=17=EF=BDW]=0B=EF=BD=EF=BDD=EF=BD=EF=BD
=EF=BD=16=EF=BD=EF=BDK=1E=EF=BD=17=EF=BDj=EF=BD=EF=BD',
.+-=15=E6=AD=BA=EF=BD=EF=BD5=EF=BD=81=ABh=EF=BD=EF=BD=1B=EF
=BD=EF=BD,z=EF=BD^=EF=BD=EF=BD=EF=BD.+-=EF=BD=D8=A5=EF
=BD=D8=9E=EF=BD=CB=9C=EF=BD=EF=BD=0B=EF=BD=EF=BDT=EF=BD=EF
=BDn=EF=BD+=EF=BD=EF=BDb=EF=BDp+r=18=EF=BDy'=EF=BD=EF
=BD=EF=BDC=EF=BD =E5=A1=A7{ =EF=BD=EF=BD=EF=BD=EF=BD,x(Z
=EF=BDP=10>=1A-=EF=BD=EF=BDZ=EF=BD=EF=BDvk=EF=BD=EF=BDk
=EF=BD=EF=BDj+y=EF=BDky=EF=BDm=EF=BD=EF=BD=EF=BD=EF=BD
=0C&j=EF=BD=EF=BD',r=EF=BD=EF=BD5=EF=BD=81=ABh=EF=BD=15
u=D0=B8=EF=BD=EF=BD=1Bm=EF=BD=EF=BD=EF=BD=EF=BD =EF
=BD=EF=BD=EF=BD'=EF=BD=EF=BD=1C=EF=BDo=EF=BDj=EF=BDj
=EF=BD+E]t.+-=EF=BDM=13=EF=BD $=EF=BD=10=11NEC=12I=EF=BD=EF
=BD=EF=BD=EF=BD=EF=BD=EF=BD=EF=BD'=EF=BD=EF=BD=EF=BD
j[(j=EF=BD=EF=BDz=EF=BD=17=EF=BDy=EF=BDh=EF=BD=EF=BDj=1A
=EF=BD~=1Bm=EF=BD=EF=BD=DF=A2=EF=BD=EF=BD=EF=BDf=EF=BD=EF
=BD=EF=BD=EF=BDr=EF=BD(=EF=BD=1Bm=EF=BD=EF=BD=DF=A2=EF
=BD=EF=BD=EF=BDf=EF=BD=EF=BD=EF=BD=EF=BDr=EF=BD(=EF=BD
=EF=BD=EF=BDB=EF=BD{k=EF=BD=EF=BD=EF=BD=EF=BD=EF=BD=EF
=BDy=EF=BD=EF=BD=EF=BD=EF=BD=EF=BDjy2=EF=BD=EF=BD=EF
=BD*.=EF=BD=07=EF=BDz=EF=BD.=EF=BD=CB=A9=EF=BD=EF=BD=EF
=BD1=EF=BDm=0E=EF=BD=EF=BD=EF=BD=EF=BD=EF=BD=EF=BD=1D
=EF=BD)=DA=86=EF=BD=EF=BD=EF=BD=EF=BDi=EF=BD=EF=BD0=EF
=BDf=EF=BD=EF=BD=EF=BD=EF=BDr=EF=BD(=EF=BD=EF=BD(=EF
=BD=EF=BD=EF=BDn=EF=BDb=EF=BDxm=EF=BD=EF=BD=EF=BD=EF
=BD=0C&j=EF=BD=EF=BD',r=EF=BD=EF=BDr=EF=BD=EF=BD&=EF=BD
*'=EF=BD=EF=BD=EF=BD=EF=BD'=EF=BD=EF=BDk{=EF=BD=EF=BD
w/=EF=BDi
>>>>
>>>>
>>>> =========
>>>> ref="http://www.matronics.com/Navigator?RV10-List">http://www.matroni
cs.com/Navigator?RV10-List
>>>> =========
>>>> ums.matronics.com">http://forums.matronics.com
>>>> =========
>>>> http://www.matronics.com/contribution">http://www.matronics.com/contrib
ution
>>>> =========
>>>>
>>>
>>>
>>> href="http://www.matronics.com/Navigator?RV10-List">http://www.matroni
cs.com/Navigator?RV10-List
>>> href="http://forums.matronics.com/">http://forums.matronics.com
>>> href="http://www.matronics.com/contribution">http://www.matronics.com/
contribution
>>>
>>
>>
>>
>> =========================
=========
>> ://www.matronics.com/Navigator?RV10-List
>> =========================
=========
>> cs.com
>> =========================
=========
>> matronics.com/contribution
>> =========================
=========
>>
>
>
==========================
=========
==========================
=========
==========================
=========
==========================
=========
>
Message 16
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Since I allowed the URL for the AMSAFE belts to lapse, I have received
several inquiries for the installation info. The info has been added to
another builder's site. As needed the list can access the data at
http://www.n423cf.com/belts/index.html . The belts are still available but
are special order for color, type and size.
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|