---------------------------------------------------------- RV10-List Digest Archive --- Total Messages Posted Tue 01/31/12: 12 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 09:24 AM - Emp on it's way! (EdKranz) 2. 10:45 AM - Re: Emp on it's way! (David Hertner) 3. 10:59 AM - Re: Emp on it's way! (Fred Williams, M.D.) 4. 11:19 AM - Re: Emp on it's way! (Mike Schulz) 5. 12:13 PM - Re: Emp on it's way! (Robin Marks) 6. 12:20 PM - Re: Emp on it's way! (speckter@comcast.net) 7. 01:05 PM - Re: Emp on it's way! (Ed Kranz) 8. 01:38 PM - Re: Emp on it's way! (Mike Schulz) 9. 06:12 PM - N541RV.....the grin continues (bob-tcw) 10. 07:49 PM - Re: N541RV.....the grin continues (Bill Watson) 11. 08:38 PM - pdf plans (Rick Lark) 12. 08:52 PM - Re: N541RV.....the grin continues (Robin Marks) ________________________________ Message 1 _____________________________________ Time: 09:24:53 AM PST US Subject: RV10-List: Emp on it's way! From: "EdKranz" As of this morning, I am officially RV10 builder # 41347! My empannage is being crated and shipped to sunny Minnesota as I type this. Now, all that's left to do is everything. Now I may have one or two (or a hundred) questions as time goes on, so I hope you all are up for helping a newbie out! Read this topic online here: http://forums.matronics.com/viewtopic.php?p=365307#365307 ________________________________ Message 2 _____________________________________ Time: 10:45:56 AM PST US From: David Hertner Subject: Re: RV10-List: Emp on it's way! Ed, Welcome aboard. Dave Hertner Do not archive -- Dave Hertner President Dial-2-Start Cellular Remote Switches www.dial2start.com Effectus AeroProducts Inc. Kit aircraft Component Manufacturing Machining Fabrication Laser/Water-Jet Cutting Phone: (519)-933-2055 Email: effectus@rogers.com Blog: www.kitaircraftmods.com ________________________________ Message 3 _____________________________________ Time: 10:59:09 AM PST US From: "Fred Williams, M.D." Subject: Re: RV10-List: Emp on it's way! Congratulations Ed Enjoy the journey. Make sure you review Tim Olsen's site. It has some of the best information and compilation of gotcha's and recommendations. Dr Fred 400 hrs. On 1/31/2012 11:19 AM, EdKranz wrote: > --> RV10-List message posted by: "EdKranz" > > As of this morning, I am officially RV10 builder # 41347! My empannage is being crated and shipped to sunny Minnesota as I type this. > > Now, all that's left to do is everything. > > Now I may have one or two (or a hundred) questions as time goes on, so I hope you all are up for helping a newbie out! > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=365307#365307 > > ________________________________ Message 4 _____________________________________ Time: 11:19:54 AM PST US Subject: Re: RV10-List: Emp on it's way! From: Mike Schulz Great to here of another one in MN. Where are you located? I'm in Mound MN. Sent from my iPad On Jan 31, 2012, at 11:19 AM, "EdKranz" wrote: > > As of this morning, I am officially RV10 builder # 41347! My empannage is being crated and shipped to sunny Minnesota as I type this. > > Now, all that's left to do is everything. > > Now I may have one or two (or a hundred) questions as time goes on, so I hope you all are up for helping a newbie out! > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=365307#365307 > > > > > > > > > > ________________________________ Message 5 _____________________________________ Time: 12:13:13 PM PST US From: Robin Marks Subject: RE: RV10-List: Emp on it's way! Amazing, 1,350 -10 kits sold. I was flying RV's when there we 2,400 on Van's Hobbs and that was not that long ago. Congratulations Ed. Robin Do Not Archive -----Original Message----- From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of EdKranz Sent: Tuesday, January 31, 2012 9:19 AM Subject: RV10-List: Emp on it's way! As of this morning, I am officially RV10 builder # 41347! My empannage is being crated and shipped to sunny Minnesota as I type this. Now, all that's left to do is everything. Now I may have one or two (or a hundred) questions as time goes on, so I hope you all are up for helping a newbie out! Read this topic online here: http://forums.matronics.com/viewtopic.php?p=365307#365307 ________________________________ Message 6 _____________________________________ Time: 12:20:16 PM PST US From: speckter@comcast.net Subject: Re: RV10-List: Emp on it's way! I have one at Lino Airpark 6 months of the year, the rest is too cold and I head south. Gary Specketer ----- Original Message ----- From: "Mike Schulz" Sent: Tuesday, January 31, 2012 2:16:50 PM Subject: Re: RV10-List: Emp on it's way! Great to here of another one in MN. Where are you located? I'm in Mound MN. Sent from my iPad On Jan 31, 2012, at 11:19 AM, "EdKranz" wrote: > > As of this morning, I am officially RV10 builder # 41347! My empannage is being crated and shipped to sunny Minnesota as I type this. > > Now, all that's left to do is everything. > > Now I may have one or two (or a hundred) questions as time goes on, so I hope you all are up for helping a newbie out! > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=365307#365307 > > > > > > > > > > =========== =========== MS - =========== e - =C2- =C2- =C2- =C2- =C2--Matt Dralle, List Admin. =========== ________________________________ Message 7 _____________________________________ Time: 01:05:02 PM PST US Subject: Re: RV10-List: Emp on it's way! From: Ed Kranz Mike: I'm down in Hastings, so not too far from you. My wife hasn't flown in a 10 yet, so I'd love to find someone close that would help me demonstrate why I'm spending all "her" money! Dr. Fred: Tim's site was the first one I found when I started researching what my dream plane would be over a year ago. I'm voracious when it comes to knowing all there is to know about something that interests me, so I've spent MANY hours on Tim's and most of the other 10 builder pages... along with the Matronics lists and VAF. But since Tim's site was first one I saw, I'll give him the credit/blame! On Tue, Jan 31, 2012 at 2:17 PM, wrote: > I have one at Lino Airpark 6 months of the year, the rest is too cold and > I head south. > > > Gary Specketer > > ------------------------------ > > *From: *"Mike Schulz" > *To: *rv10-list@matronics.com > *Sent: *Tuesday, January 31, 2012 2:16:50 PM > *Subject: *Re: RV10-List: Emp on it's way! > > > > Great to here of another one in MN. > Where are you located? > I'm in Mound MN. > > Sent from my iPad > > On Jan 31, 2012, at 11:19 AM, "EdKranz" wrote: > > > > > As of this morning, I am officially RV10 builder # 41347! My empannage > is being crated and shipped to sunny Minnesota as I type this. > > > > Now, all that's left to do is everything. > > > > Now I may have one or two (or a hundred) questions as time goes on, so I > hope you all are up for helping a newbie out! > > > > > > > > > > Read this topic online here: > > > > http://forums.matronics.com/viewtopic.php?p=365307#365307 > > > > > > > > > > > > > &sp; & > > > * > > * > > ________________________________ Message 8 _____________________________________ Time: 01:38:53 PM PST US Subject: Re: RV10-List: Emp on it's way! From: Mike Schulz I got my first ride from Tim last fall and have been revved up since. I got my fuselage 90 percent and my wings 95 percent and soon I will be look ing at engines and Avionics. Mike Schulz. 612-590-8604 let's talk sometime. Sent from my iPad On Jan 31, 2012, at 3:01 PM, Ed Kranz wrote: > Mike: > I'm down in Hastings, so not too far from you. My wife hasn't flown in a 1 0 yet, so I'd love to find someone close that would help me demonstrate why I 'm spending all "her" money! > > Dr. Fred: > Tim's site was the first one I found when I started researching what my dr eam plane would be over a year ago. I'm voracious when it comes to knowing a ll there is to know about something that interests me, so I've spent MANY ho urs on Tim's and most of the other 10 builder pages... along with the Matron ics lists and VAF. > > But since Tim's site was first one I saw, I'll give him the credit/blame! > > On Tue, Jan 31, 2012 at 2:17 PM, wrote: > I have one at Lino Airpark 6 months of the year, the rest is too cold and I head south. > > > > Gary Specketer > > > From: "Mike Schulz" > To: rv10-list@matronics.com > Sent: Tuesday, January 31, 2012 2:16:50 PM > Subject: Re: RV10-List: Emp on it's way! > > > > > Great to here of another one in MN. > Where are you located? > I'm in Mound MN. > > Sent from my iPad > > On Jan 31, 2012, at 11:19 AM, "EdKranz" wrote: > > > > > As of this morning, I am officially RV10 builder # 41347! My empannage i s being crated and shipped to sunny Minnesota as I type this. > > > > Now, all that's left to do is everything. > > > > Now I may have one or two (or a hundred) questions as time goes on, so I hope you all are up for helping a newbie out! > > > > > > > > > > Read this topic online here: > > > > http://forums.matronics.com/viewtopic.php?p=365307#365307 > > > > > > > > > > > > > &sp; & > > > > > > get="_blank">http://www.matronics.com/Navigator?RV10-List > tp://forums.matronics.com > _blank">http://www.matronics.com/contribution > > > > ========================== ========= ========================== ========= ========================== ========= ========================== ========= > ________________________________ Message 9 _____________________________________ Time: 06:12:03 PM PST US From: "bob-tcw" Subject: RV10-List: N541RV.....the grin continues For those already flying you know what I=99m about to say...,,,, for those building, holy cow, this is one going airplane! Today I left the comfort of the local airport practice area and began the exploration of my Phase 1 area. I headed out on a 166 nm journey and in 1 hour I was back where I started!! Leveled out and cruising I saw 171 to 173 knots TAS at 4500 ft and 70% power the whole way, rock steady. I was with full fuel, and with about 50 lbs of junk in the trunk. Bob Newman N541RV 8 hrs. having more fun than I can remember in a long time! do not archive ________________________________ Message 10 ____________________________________ Time: 07:49:48 PM PST US Subject: Re: RV10-List: N541RV.....the grin continues From: Bill Watson Yep, know exactly what you are saying. One sweet ride Sent from my iPad On Jan 31, 2012, at 9:04 PM, "bob-tcw" wrote: > For those already flying you know what I=99m about to say...,,,, for those building, holy cow, this is one going airplane! > > Today I left the comfort of the local airport practice area and began the e xploration of my Phase 1 area. I headed out on a 166 nm journey and in 1 hour I was back where I started!! Leveled out and cruising I saw 171 to 1 73 knots TAS at 4500 ft and 70% power the whole way, rock steady. I was w ith full fuel, and with about 50 lbs of junk in the trunk. > > Bob Newman > N541RV 8 hrs. > having more fun than I can remember in a long time! > > > do not archive > > > > > ________________________________ Message 11 ____________________________________ Time: 08:38:00 PM PST US From: Rick Lark Subject: RV10-List: pdf plans Hi all - When-I last went on vacation I had a link to someones Picassa web site th at contained PDF's of all or most of the RV10 plans.- It appears I have d eleted that email link from my laptop.- I seem to recall someone named "C hris" had the pdf's (I could be totally wrong on this).- If that person i s still online I'd sure love to get that link back again (it worked very we ll), or if anyone has the link please forward to me off line or however you like. Thx in advance. - Rick #40956 Southampton, Ont ________________________________ Message 12 ____________________________________ Time: 08:52:49 PM PST US From: Robin Marks Subject: Re: RV10-List: N541RV.....the grin continues Bob what's your fuel burn at 70% / 4500'? Good fun ain't it. Robin Sent from my iPad2. On Jan 31, 2012, at 7:59 PM, "Bill Watson" > wrote: Yep, know exactly what you are saying. One sweet ride Sent from my iPad On Jan 31, 2012, at 9:04 PM, "bob-tcw" <rnewman @tcwtech.com> wrote: For those already flying you know what I=92m about to say...,,,, for those building, holy cow, this is one going airplane! Today I left the comfort of the local airport practice area and began the e xploration of my Phase 1 area. I headed out on a 166 nm journey and in 1 hour I was back where I started!! Leveled out and cruising I saw 171 t o 173 knots TAS at 4500 ft and 70% power the whole way, rock steady. I was with full fuel, and with about 50 lbs of junk in the trunk. Bob Newman N541RV 8 hrs. having more fun than I can remember in a long time! do not archive nics.com/Navigator?RV10-List m/contribution ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message rv10-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/RV10-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/rv10-list Browse Digests http://www.matronics.com/digest/rv10-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.