---------------------------------------------------------- RV10-List Digest Archive --- Total Messages Posted Thu 04/05/12: 7 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 04:37 AM - Exhaust installation plan (Mike Whisky) 2. 08:37 AM - Re: Exhaust installation plan (rv10flyer) 3. 10:36 AM - Re: Exhaust installation plan (Jim Berry) 4. 11:17 AM - Re: Exhaust installation plan (Mike Whisky) 5. 03:20 PM - Re: Re: Exhaust installation plan (davidsoutpost@comcast.net) 6. 05:52 PM - Re: Exhaust installation plan (Chris) 7. 10:31 PM - Re: Exhaust installation plan (Mike Whisky) ________________________________ Message 1 _____________________________________ Time: 04:37:21 AM PST US Subject: RV10-List: Exhaust installation plan From: "Mike Whisky" Hi, I cant find the handwritten exhaust installation plans from Vetterman. Could someone please post them as pdf? I installed them from what I remember seeing but I cant get them fit close enough to the belly and to the gear to not inter fear with the bottom cowling. Installation pictures are welcome as well. Thanks Michael -------- RV-10 builder (interior & finishing) #511 Read this topic online here: http://forums.matronics.com/viewtopic.php?p=370069#370069 ________________________________ Message 2 _____________________________________ Time: 08:37:12 AM PST US Subject: RV10-List: Re: Exhaust installation plan From: "rv10flyer" You will need to cut a half moon shape out in lower cowl to provide 1/2" clearance. No more than that is needed due to large amount of cooling air at high power settings. -------- Wayne Gillispie, A&P 05/93 PP 10/08 40983SB 12/1/2009-12/1/2011 N715WD 382nd Flying. TT= 41 Read this topic online here: http://forums.matronics.com/viewtopic.php?p=370091#370091 ________________________________ Message 3 _____________________________________ Time: 10:36:35 AM PST US Subject: RV10-List: Re: Exhaust installation plan From: "Jim Berry" I did not need to cut the lower cowl to get clearance, but it did take a fair amount of fiddling with the exhaust hangers to get it right. I would not cut the cowl except as a last resort. Jim Berry N15JB Read this topic online here: http://forums.matronics.com/viewtopic.php?p=370108#370108 ________________________________ Message 4 _____________________________________ Time: 11:17:44 AM PST US Subject: RV10-List: Re: Exhaust installation plan From: "Mike Whisky" I agree Jim, could someone please send me a scan of the plan though because the way I did mount it, it doest really fit. Mike Jim Berry wrote: > I did not need to cut the lower cowl to get clearance, but it did take a fair amount of fiddling with the exhaust hangers to get it right. I would not cut the cowl except as a last resort. > > Jim Berry > N15JB -------- RV-10 builder (interior & finishing) #511 Read this topic online here: http://forums.matronics.com/viewtopic.php?p=370115#370115 ________________________________ Message 5 _____________________________________ Time: 03:20:39 PM PST US From: davidsoutpost@comcast.net Subject: Re: RV10-List: Re: Exhaust installation plan I trimmed my cowl per plans and there is plenty of clearance for the pipes. David Clifford RV-10 Builder Howell, MI ----- Original Message ----- From: "Mike Whisky" Sent: Thursday, April 5, 2012 2:16:55 PM Subject: RV10-List: Re: Exhaust installation plan I agree Jim, could someone please send me a scan of the plan though because the way I di d mount it, it does=C3=82=C2=B4t really fit. Mike Jim Berry wrote: > I did not need to cut the lower cowl to get clearance, but it did take a fair amount of fiddling with the exhaust hangers to get it right. I would n ot cut the cowl except as a last resort. > > Jim Berry > N15JB -------- RV-10 builder (interior & finishing) #511 Read this topic online here: http://forums.matronics.com/viewtopic.php?p=370115#370115 =========== =========== =========== =========== ________________________________ Message 6 _____________________________________ Time: 05:52:29 PM PST US From: "Chris" Subject: RE: RV10-List: Exhaust installation plan Have you seen these revisions? Mine worked just about like the prototype in these pictures, no cutting on anything but a fair amount of jockeying around and bending of the support strap to pull the exhaust up higher and keep it there such that the clearance to the bottom edge of the firewall is close but ok. -Chris N919AR Flying http://www.vansaircraft.com/pdf/revisions/RV-10/FF6-06.pdf http://www.vansaircraft.com/pdf/revisions/RV-10/FF6-05.pdf http://www.vansaircraft.com/pdf/revisions/RV-10/FF6-01.pdf -----Original Message----- From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Mike Whisky Sent: Thursday, April 05, 2012 7:36 AM Subject: RV10-List: Exhaust installation plan Hi, I cant find the handwritten exhaust installation plans from Vetterman. Could someone please post them as pdf? I installed them from what I remember seeing but I cant get them fit close enough to the belly and to the gear to not inter fear with the bottom cowling. Installation pictures are welcome as well. Thanks Michael -------- RV-10 builder (interior & finishing) #511 Read this topic online here: http://forums.matronics.com/viewtopic.php?p=370069#370069 ________________________________ Message 7 _____________________________________ Time: 10:31:38 PM PST US Subject: RV10-List: Re: Exhaust installation plan From: "Mike Whisky" Thanks Chris, This is exactly what I needed! It looks as if I'll have to cut back my breather tube a bit as it is in the way of the exhaust pipe. Regards Michael -------- RV-10 builder (interior & finishing) #511 Read this topic online here: http://forums.matronics.com/viewtopic.php?p=370144#370144 ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message rv10-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/RV10-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/rv10-list Browse Digests http://www.matronics.com/digest/rv10-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.