---------------------------------------------------------- RV10-List Digest Archive --- Total Messages Posted Sat 04/14/12: 10 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 06:14 AM - Brake Spacers (Greg McFarlane) 2. 08:38 AM - Re: Brake Spacers (charliewaffles) 3. 09:07 AM - Re: Re: Brake Spacers (Pascal) 4. 09:21 AM - Re: Re: Brake Spacers () 5. 03:33 PM - RV-10 transition training (Carl Froehlich) 6. 03:57 PM - Re: RV-10 transition training (Pascal) 7. 04:13 PM - Re: [Mid-AtlRVwing] RV-10 transition training (Ralph) 8. 04:27 PM - Re: RV-10 transition training (bob-tcw) 9. 04:39 PM - Re: [Mid-AtlRVwing] RV-10 transition training (carl.froehlich@verizon.net) 10. 05:15 PM - Re: RV-10 transition training (Les Kearney) ________________________________ Message 1 _____________________________________ Time: 06:14:50 AM PST US Subject: RV10-List: Brake Spacers From: "Greg McFarlane" If anyone has replaced the U-1004B wheel nut extensions with something more substantial to alleviate the failure which will happen when using rough airstrips, then a good use for the original extensions is to drill completely through the length of them then cut them up to make the six U-1008 brake spacers. Much better material for the spacers than the soft ATS-058 tube called for in the plans. [pages 46-4 & 46-5 in plans] 8) Read this topic online here: http://forums.matronics.com/viewtopic.php?p=370771#370771 ________________________________ Message 2 _____________________________________ Time: 08:38:21 AM PST US Subject: RV10-List: Re: Brake Spacers From: "charliewaffles" Best to go with one of the solid options like this: http://www.cleavelandtoolstore.com/prodinfo.asp?number=RVAE10 Read this topic online here: http://forums.matronics.com/viewtopic.php?p=370778#370778 ________________________________ Message 3 _____________________________________ Time: 09:07:11 AM PST US From: "Pascal" Subject: Re: RV10-List: Re: Brake Spacers They are solid and agree with Charlie, better to go this route than try anything else. I was fortunate to get the Don McDonald spacers. He made a certain amount and are now carried by Plane Innovations http://www.planeinnovations.com/axlesbrackets.html, if you scroll down the webpage there are a couple of other items, again Don specials that I also have and they have been great for the seatbelts, passenger side never dropped out in the air when not in use. As a side note, I have the steel heater bypass http://www.planeinnovations.com/heaterbypass.html. From experience, they block all the heat and I dont have a tunnel heat issue, not sure they are related but I know from testing that the aluminum ones from the kit leak and these dont. There is a deflector that covers the door when closed which helps block the forced air. Pascal -----Original Message----- From: charliewaffles Sent: Saturday, April 14, 2012 8:36 AM Subject: RV10-List: Re: Brake Spacers Best to go with one of the solid options like this: http://www.cleavelandtoolstore.com/prodinfo.asp?number=RVAE10 Read this topic online here: http://forums.matronics.com/viewtopic.php?p=370778#370778 ________________________________ Message 4 _____________________________________ Time: 09:21:59 AM PST US From: Subject: Re: RV10-List: Re: Brake Spacers Hey Guys, I think you may have missed Greg's point -- he has replaced the axel extension as you have, and is using the old extension for brake spacers. Later, - Lew -----Original Message----- From: Pascal Sent: Saturday, April 14, 2012 12:06 PM Subject: Re: RV10-List: Re: Brake Spacers They are solid and agree with Charlie, better to go this route than try anything else. I was fortunate to get the Don McDonald spacers. He made a certain amount and are now carried by Plane Innovations http://www.planeinnovations.com/axlesbrackets.html, if you scroll down the webpage there are a couple of other items, again Don specials that I also have and they have been great for the seatbelts, passenger side never dropped out in the air when not in use. As a side note, I have the steel heater bypass http://www.planeinnovations.com/heaterbypass.html. From experience, they block all the heat and I dont have a tunnel heat issue, not sure they are related but I know from testing that the aluminum ones from the kit leak and these dont. There is a deflector that covers the door when closed which helps block the forced air. Pascal -----Original Message----- From: charliewaffles Sent: Saturday, April 14, 2012 8:36 AM Subject: RV10-List: Re: Brake Spacers Best to go with one of the solid options like this: http://www.cleavelandtoolstore.com/prodinfo.asp?number=RVAE10 . ________________________________ Message 5 _____________________________________ Time: 03:33:24 PM PST US From: "Carl Froehlich" Subject: RV10-List: RV-10 transition training All, Looks like the FSDO will be out the first week or so in May to sign off the RV-10 project. My insurance requires 2 hours of transition time in an RV-10 with a CFI. While I know the Van's guy in Dallas is available, I would prefer something closer to home (Fredericksburg, Virginia). Any RV-10 CFI guy/gals out there on this side of the Mississippi willing to help me out? Carl ________________________________ Message 6 _____________________________________ Time: 03:57:46 PM PST US From: "Pascal" Subject: Re: RV10-List: RV-10 transition training My insurance gave me two options 1) Oregon 2) Texas both Vans signed off =9Cofficial RV-10 Cfi=99s=9D. I didn=99t care as I had my training in Texas, but make sure the 2 hours is with any Cfi and not the signed off ones. I asked when I called EAA for the quote-is was pretty clear it HAD to be with the signed off cfi=99s and not my neighbor who was a Cfi that owned a RV-10. Sounds like you have this covered however. From: Carl Froehlich Sent: Saturday, April 14, 2012 3:31 PM Subject: RV10-List: RV-10 transition training All, Looks like the FSDO will be out the first week or so in May to sign off the RV-10 project. My insurance requires 2 hours of transition time in an RV-10 with a CFI. While I know the Van=99s guy in Dallas is available, I would prefer something closer to home (Fredericksburg, Virginia). Any RV-10 CFI guy/gals out there on this side of the Mississippi willing to help me out? Carl ________________________________ Message 7 _____________________________________ Time: 04:13:27 PM PST US From: Ralph Subject: RV10-List: Re: [Mid-AtlRVwing] RV-10 transition training Carl, You may try Chip Locke at St Mary's may be able to help, not sure he is a CFI but he probably knows one. Ralph Sent from my iPad On Apr 14, 2012, at 6:31 PM, "Carl Froehlich" w rote: > All, > > > > Looks like the FSDO will be out the first week or so in May to sign off th e RV-10 project. My insurance requires 2 hours of transition time in an RV- 10 with a CFI. While I know the Van=99s guy in Dallas is available, I would prefer something closer to home (Fredericksburg, Virginia). > > > > Any RV-10 CFI guy/gals out there on this side of the Mississippi willing t o help me out? > > > Carl > > __._,_.___ > Reply to sender | Reply to group | Reply via web post | Start a New Topic > Messages in this topic (1) > RECENT ACTIVITY: > Visit Your Group > Switch to: Text-Only, Daily Digest =A2 Unsubscribe =A2 Terms o f Use > . > > __,_._,___ ________________________________ Message 8 _____________________________________ Time: 04:27:25 PM PST US From: "bob-tcw" Subject: Re: RV10-List: RV-10 transition training Carl, I did my transition training with Dave Maib in New Smyrna Beach, FL. It was a great experience and I certainly would highly recommend Dave=99s training services. Bob Newman N541RV 60 hrs. From: Carl Froehlich Sent: Saturday, April 14, 2012 6:31 PM Subject: RV10-List: RV-10 transition training All, Looks like the FSDO will be out the first week or so in May to sign off the RV-10 project. My insurance requires 2 hours of transition time in an RV-10 with a CFI. While I know the Van=99s guy in Dallas is available, I would prefer something closer to home (Fredericksburg, Virginia). Any RV-10 CFI guy/gals out there on this side of the Mississippi willing to help me out? Carl ________________________________ Message 9 _____________________________________ Time: 04:39:06 PM PST US From: "carl.froehlich@verizon.net" Subject: RV10-List: Re: [Mid-AtlRVwing] RV-10 transition training WWVwLCBTdC4gTWFyeSdzIHdhcyBwbGFuIEEsIGJ1dCByaWdodCBub3cgdGhhdCBpcyBub3QgYXZh aWxhYmxlIGFuZCBubyBsaW5lIG9mIHNpZ2h0IG9uIHdoZW4gaXQgd2lsbC4KCkNhcmwKClNlbnQg ZnJvbSBteSBwaG9uZS7CoCBQbGVhc2UgcmVhZCBwYXNzIHRoZSB0eXBvcy4KCi0tLS0tT3JpZ2lu YWwgbWVzc2FnZS0tLS0tCkZyb206IFJhbHBoIDxob292ZXJyYUBjb21jYXN0Lm5ldD4KVG86ICJN aWQtQXRsUlZ3aW5nQHlhaG9vZ3JvdXBzLmNvbSIgPE1pZC1BdGxSVndpbmdAeWFob29ncm91cHMu Y29tPgpDYzogIjxydjEwLWxpc3RAbWF0cm9uaWNzLmNvbT4iIDxydjEwLWxpc3RAbWF0cm9uaWNz LmNvbT4sICI8TWlkLUF0bFJWd2luZ0B5YWhvb2dyb3Vwcy5jb20+IiA8TWlkLUF0bFJWd2luZ0B5 YWhvb2dyb3Vwcy5jb20+ClNlbnQ6IFNhdCwgQXByIDE0LCAyMDEyIDIzOjExOjQ1IEdNVCswMDow MApTdWJqZWN0OiBSZTogW01pZC1BdGxSVndpbmddIFJWLTEwIHRyYW5zaXRpb24gdHJhaW5pbmcK CkNhcmwsCllvdSBtYXkgdHJ5IENoaXAgTG9ja2UgYXQgU3QgTWFyeSdzIG1heSBiZSBhYmxlIHRv IGhlbHAsIG5vdCBzdXJlIGhlIGlzIGEgQ0ZJIGJ1dCBoZSBwcm9iYWJseSBrbm93cyBvbmUuIAoK UmFscGgKClNlbnQgZnJvbSBteSBpUGFkCgpPbiBBcHIgMTQsIDIwMTIsIGF0IDY6MzEgUE0sICJD YXJsIEZyb2VobGljaCIgPGNhcmwuZnJvZWhsaWNoQHZlcml6b24ubmV0PiB3cm90ZToKCj4gQWxs LAo+IAo+ICAKPiAKPiBMb29rcyBsaWtlIHRoZSBGU0RPIHdpbGwgYmUgb3V0IHRoZSBmaXJzdCB3 ZWVrIG9yIHNvIGluIE1heSB0byBzaWduIG9mZiB0aGUgUlYtMTAgcHJvamVjdC4gIE15IGluc3Vy YW5jZSByZXF1aXJlcyAyIGhvdXJzIG9mIHRyYW5zaXRpb24gdGltZSBpbiBhbiBSVi0xMCB3aXRo IGEgQ0ZJLiAgV2hpbGUgSSBrbm93IHRoZSBWYW7igJlzIGd1eSBpbiBEYWxsYXMgaXMgYXZhaWxh YmxlLCBJIHdvdWxkIHByZWZlciBzb21ldGhpbmcgY2xvc2VyIHRvIGhvbWUgKEZyZWRlcmlja3Ni dXJnLCBWaXJnaW5pYSkuCj4gCj4gIAo+IAo+IEFueSBSVi0xMCBDRkkgZ3V5L2dhbHMgb3V0IHRo ZXJlIG9uIHRoaXMgc2lkZSBvZiB0aGUgTWlzc2lzc2lwcGkgd2lsbGluZyB0byBoZWxwIG1lIG91 dD8KPiAKPiAKPiBDYXJsCj4gCj4gCgo ________________________________ Message 10 ____________________________________ Time: 05:15:29 PM PST US From: Les Kearney Subject: Re: RV10-List: RV-10 transition training Carl I spent a couple of days with David in early March. It was a great experienc e. Cheers Les Sent from my iPhone On 2012-04-14, at 5:26 PM, bob-tcw wrote: > Carl, I did my transition training with Dave Maib in New Smyrna Beach, FL. It was a great experience and I certainly would highly recommend Dav e=99s training services. > > Bob Newman > N541RV > 60 hrs. > > > From: Carl Froehlich > Sent: Saturday, April 14, 2012 6:31 PM > To: rv10-list@matronics.com ; Mid-AtlRVwing@yahoogroups.com > Subject: RV10-List: RV-10 transition training > > All, > > Looks like the FSDO will be out the first week or so in May to sign off th e RV-10 project. My insurance requires 2 hours of transition time in an RV- 10 with a CFI. While I know the Van=99s guy in Dallas is available, I would prefer something closer to home (Fredericksburg, Virginia). > > Any RV-10 CFI guy/gals out there on this side of the Mississippi willing t o help me out? > > Carl > > > href="http://www.matronics.com/Navigator?RV10-List">http://www.matronics .com/Navigator?RV10-List > href="http://forums.matronics.com">http://forums.matronics.com > href="http://www.matronics.com/contribution">http://www.matronics.com/c > > ========================== ========= ========================== ========= ========================== ========= ========================== ========= > ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message rv10-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/RV10-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/rv10-list Browse Digests http://www.matronics.com/digest/rv10-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.