---------------------------------------------------------- RV10-List Digest Archive --- Total Messages Posted Mon 04/16/12: 4 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 10:01 AM - Wing wiring / bushing size (Tom Biggs) 2. 10:26 AM - Re: Wing wiring / bushing size (Rene Felker) 3. 11:40 AM - Re: Wing wiring / bushing size (Carl Froehlich) 4. 05:59 PM - VDO 360-003 fuel pressure sensor transducer (DLM) ________________________________ Message 1 _____________________________________ Time: 10:01:32 AM PST US Subject: RV10-List: Wing wiring / bushing size From: "Tom Biggs" I am working on the left wing and am to the point where I need to drill the holes for the snap bushings for pulling wires. I want to do this BEFORE I put the ribs on the spar to rivet. The question is, what size bushings do I need? I have HID landing light wires all the way to the end, I will have heated pitot tube wires to where the pitot tube mounts (I know that Tim mounted his a bit further out, I will have wires running to the Trutrak servos....... How big a bushing did you need to start? Did you mount the HID landing light wires through the same bushing? what about the ones for the pitot tube heat? Curious what solutions were used. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=370961#370961 ________________________________ Message 2 _____________________________________ Time: 10:26:30 AM PST US From: "Rene Felker" Subject: RE: RV10-List: Wing wiring / bushing size I used conduit and no bushings. Sorry I do not remember the whole size. I think it is in the Archives. Rene' Felker N423CF 801-721-6080 -----Original Message----- From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Tom Biggs Sent: Monday, April 16, 2012 11:01 AM Subject: RV10-List: Wing wiring / bushing size I am working on the left wing and am to the point where I need to drill the holes for the snap bushings for pulling wires. I want to do this BEFORE I put the ribs on the spar to rivet. The question is, what size bushings do I need? I have HID landing light wires all the way to the end, I will have heated pitot tube wires to where the pitot tube mounts (I know that Tim mounted his a bit further out, I will have wires running to the Trutrak servos....... How big a bushing did you need to start? Did you mount the HID landing light wires through the same bushing? what about the ones for the pitot tube heat? Curious what solutions were used. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=370961#370961 ________________________________ Message 3 _____________________________________ Time: 11:40:44 AM PST US From: Carl Froehlich Subject: Re: RV10-List: Wing wiring / bushing size Plastic water pipe (not PVC) from the aviation department at Lowes. Light and tough. 3/4" hole. The pipe is big enough for all the runs you listed, and a coax line for a wing tip NAV antenna. Carl On Apr 16, 2012, at 1:23 PM, "Rene Felker" wrote: > > I used conduit and no bushings. Sorry I do not remember the whole size. I > think it is in the Archives. > > Rene' Felker > N423CF > 801-721-6080 > > -----Original Message----- > From: owner-rv10-list-server@matronics.com > [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Tom Biggs > Sent: Monday, April 16, 2012 11:01 AM > To: rv10-list@matronics.com > Subject: RV10-List: Wing wiring / bushing size > > > I am working on the left wing and am to the point where I need to drill the > holes for the snap bushings for pulling wires. I want to do this BEFORE I > put the ribs on the spar to rivet. The question is, what size bushings do I > need? I have HID landing light wires all the way to the end, I will have > heated pitot tube wires to where the pitot tube mounts (I know that Tim > mounted his a bit further out, I will have wires running to the Trutrak > servos....... > How big a bushing did you need to start? > Did you mount the HID landing light wires through the same bushing? > what about the ones for the pitot tube heat? > > Curious what solutions were used. > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=370961#370961 > > > > > > > > > > > > > > ________________________________ Message 4 _____________________________________ Time: 05:59:44 PM PST US From: "DLM" Subject: RV10-List: VDO 360-003 fuel pressure sensor transducer I am on my second; the first lasted about 500 hours; the second has lasted about 50 hours. They begin to fail by showing fuel pressures that are abnormally high intermittently. Anyone else has a similar problem? ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message rv10-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/RV10-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/rv10-list Browse Digests http://www.matronics.com/digest/rv10-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.