---------------------------------------------------------- RV10-List Digest Archive --- Total Messages Posted Wed 04/18/12: 21 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 12:24 AM - Re: Measurements Needed - Throttle/Prop/Mixture (Vernier) (John MacCallum) 2. 05:46 AM - Re: Measurements Needed - Throttle/Prop/Mixture (Vernier) (Sean Stephens) 3. 07:38 AM - Re: Measurements Needed - Throttle/Prop/Mixture (Vernier) (Phillip Perry) 4. 08:34 AM - Oshkosh motorhome (Scott Schmidt) 5. 10:52 AM - iPad in the cockipt (Dawson-Townsend,Timothy) 6. 11:13 AM - Re: iPad in the cockipt (Alan Mekler MD) 7. 11:32 AM - Video: Pipistrel Panthera Revealed (jchang10) 8. 11:41 AM - Re: iPad in the cockipt (Jeff Carpenter) 9. 11:42 AM - Re: Video: Pipistrel Panthera Revealed (Alan Mekler MD) 10. 11:47 AM - Re: Video: Pipistrel Panthera Revealed (Shannon Hicks) 11. 11:47 AM - Re: Video: Pipistrel Panthera Revealed (Phillip Perry) 12. 11:50 AM - Re: Video: Pipistrel Panthera Revealed (Ed Kranz) 13. 12:11 PM - Re: iPad in the cockipt (Robin Marks) 14. 12:44 PM - Re: iPad in the cockipt (Seano) 15. 12:52 PM - Re: iPad in the cockipt (g.combs) 16. 01:00 PM - Re: iPad in the cockipt (Jesse Saint) 17. 01:01 PM - Virtual Hangar Visit (Ed Kranz) 18. 01:07 PM - Re: iPad in the cockipt (Jeff Carpenter) 19. 01:33 PM - Re: iPad in the cockipt (Geoff Combs) 20. 05:25 PM - Re: Measurements Needed - Throttle/Prop/Mixture (Vernier) (maca2790) 21. 05:42 PM - Re: iPad in the cockipt (Bill Watson) ________________________________ Message 1 _____________________________________ Time: 12:24:47 AM PST US From: "John MacCallum" Subject: RE: RV10-List: Measurements Needed - Throttle/Prop/Mixture (Vernier) Hi Phil, I will measure mine for you tonight. I think that I am going to have the same problem as I have the Aerosport Products Carbon Fibre Panel and the Cables sit a little lower and a little further rearwards than the stock support bracket. Cheers John MacCallum #41016 VH-DUU From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Phillip Perry Sent: Wednesday, 18 April 2012 1:14 AM Subject: RV10-List: Measurements Needed - Throttle/Prop/Mixture (Vernier) Hi Everyone, I'm having some custom length vernier cables manufactured by McFarlane and need some basic measurements from Vans stock cables before I can proceed. Does anyone have a set of cables that are not installed and who can make some measurements for me? I had no idea it was this complex of a process. Attached to this message is the McFarlane spec sheet for their cables. Once I get the basic measurements from a stock set of cables, I can figure out the rest. I'll be happy to share all the dimensions for the future builders so they don't have to go through the process. Thanks in advance for your help! Phil ________________________________ Message 2 _____________________________________ Time: 05:46:21 AM PST US From: Sean Stephens Subject: Re: RV10-List: Measurements Needed - Throttle/Prop/Mixture (Vernier) John, check out the third to last post in this thread from Ivan. Phil, there may be some info in there for you also. http://forums.matronics.com/viewtopic.php?p=321568 -Sean #40303 (fitting doors) On 4/18/12 2:23 AM, John MacCallum wrote: > > Hi Phil, > > I will measure mine for you tonight. I think that I am going to have > the same problem as I have the Aerosport Products Carbon Fibre Panel > > and the Cables sit a little lower and a little further rearwards than > the stock support bracket. > > Cheers > > John MacCallum > > #41016 > > VH-DUU > > *From:*owner-rv10-list-server@matronics.com > [mailto:owner-rv10-list-server@matronics.com] *On Behalf Of *Phillip Perry > *Sent:* Wednesday, 18 April 2012 1:14 AM > *To:* rv10-list@matronics.com > *Subject:* RV10-List: Measurements Needed - Throttle/Prop/Mixture > (Vernier) > > Hi Everyone, > > I'm having some custom length vernier cables manufactured by McFarlane > and need some basic measurements from Vans stock cables before I can > proceed. > > Does anyone have a set of cables that are not installed and who can > make some measurements for me? I had no idea it was this complex of a > process. > > Attached to this message is the McFarlane spec sheet for their cables. > > Once I get the basic measurements from a stock set of cables, I can > figure out the rest. I'll be happy to share all the dimensions for > the future builders so they don't have to go through the process. > > Thanks in advance for your help! > Phil > > * > > > * ________________________________ Message 3 _____________________________________ Time: 07:38:27 AM PST US Subject: Re: RV10-List: Measurements Needed - Throttle/Prop/Mixture (Vernier) From: Phillip Perry Thanks John... Sean, I've seen that post and I'm using those lengths for my final lengths, but there are a few more measurements that McFarlane is looking for and I can't get them without having my hands on a set of controls to measure. Phil On Wed, Apr 18, 2012 at 7:45 AM, Sean Stephens wrote: > > John, check out the third to last post in this thread from Ivan. Phil, > there may be some info in there for you also. > > http://forums.matronics.com/**viewtopic.php?p=321568 > > -Sean #40303 (fitting doors) > > ________________________________ Message 4 _____________________________________ Time: 08:34:07 AM PST US Subject: RV10-List: Oshkosh motorhome From: Scott Schmidt I wanted to post here first. I just cancelled this motorhome because I received a trailer rental that will be delivered to my campsite. This is there last one. Just thought I would post here if anyone is interested. http://www.wisconsinrvworld.com/custompage2.asp?pg=31krental -Scott Sent from my iPad ________________________________ Message 5 _____________________________________ Time: 10:52:22 AM PST US From: "Dawson-Townsend,Timothy" Subject: RV10-List: iPad in the cockipt iPad users: I'm more inclined to have the iPad in the RV-10 cockpit up in front by the dash somewhere, rather than as a kneeboard. What experience have others had? Is a RAM mount clamped on the edge of the glareshield rigid enough? Other mounting ideas? Tim N52KS ________________________________ Message 6 _____________________________________ Time: 11:13:58 AM PST US Subject: Re: RV10-List: iPad in the cockipt From: Alan Mekler MD Tim, I have mine mounted on the tunnel just in front of the fuel valve. Alan Sent from my iPhone On Apr 18, 2012, at 1:51 PM, "Dawson-Townsend,Timothy" wrote: > iPad users: > > I'm more inclined to have the iPad in the RV-10 cockpit up in front by the dash somewhere, rather than as a kneeboard. > > What experience have others had? Is a RAM mount clamped on the edge of th e glareshield rigid enough? Other mounting ideas? > > Tim > N52KS > > ========================== ========= ========================== ========= ========================== ========= ========================== ========= > ________________________________ Message 7 _____________________________________ Time: 11:32:03 AM PST US Subject: RV10-List: Video: Pipistrel Panthera Revealed From: "jchang10" http://www.avweb.com/avwebflash/exclusivevids/ExclusiveVideo_Aero2012_PipistrelPanthera_206547-1.html Wow, this will be interesting. Looks like another 4-seat plane similar to the -10 and Cirrus. Jae -------- #40533 RV-10 First flight 10/19/2011 Phase 1 Done 11/26/2011 Read this topic online here: http://forums.matronics.com/viewtopic.php?p=371174#371174 ________________________________ Message 8 _____________________________________ Time: 11:41:09 AM PST US From: Jeff Carpenter Subject: Re: RV10-List: iPad in the cockipt Any though given to mounting it to the center post along the windscreen? It could double as a sun visor. Jeff Carpenter 40304 On Apr 18, 2012, at 11:12 AM, Alan Mekler MD wrote: > Tim, > I have mine mounted on the tunnel just in front of the fuel valve. > Alan > > Sent from my iPhone > > On Apr 18, 2012, at 1:51 PM, "Dawson-Townsend,Timothy" > wrote: > >> iPad users: >> >> I'm more inclined to have the iPad in the RV-10 cockpit up in front >> by the dash somewhere, rather than as a kneeboard. >> >> What experience have others had? Is a RAM mount clamped on the >> edge of the glareshield rigid enough? Other mounting ideas? >> >> Tim >> N52KS >> >> >> > > > _- > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > ====================== > _- > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > ====================== > _- > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > ====================== > _- > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > ====================== > ________________________________ Message 9 _____________________________________ Time: 11:42:02 AM PST US Subject: Re: RV10-List: Video: Pipistrel Panthera Revealed From: Alan Mekler MD 200 kts on 10gph! 1000nm range No price mentioned Alan Sent from my iPhone On Apr 18, 2012, at 2:31 PM, "jchang10" wrote: > > http://www.avweb.com/avwebflash/exclusivevids/ExclusiveVideo_Aero2012_PipistrelPanthera_206547-1.html > > Wow, this will be interesting. Looks like another 4-seat plane similar to the -10 and Cirrus. > > Jae > > -------- > #40533 RV-10 > First flight 10/19/2011 > Phase 1 Done 11/26/2011 > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=371174#371174 > > > > > > > > > > ________________________________ Message 10 ____________________________________ Time: 11:47:26 AM PST US Subject: Re: RV10-List: Video: Pipistrel Panthera Revealed From: Shannon Hicks Avweb listed it as $500,000 On Wed, Apr 18, 2012 at 1:41 PM, Alan Mekler MD wrote: > > 200 kts on 10gph! > 1000nm range > No price mentioned > > Alan > > Sent from my iPhone > > On Apr 18, 2012, at 2:31 PM, "jchang10" > wrote: > > > > > > > > http://www.avweb.com/avwebflash/exclusivevids/ExclusiveVideo_Aero2012_PipistrelPanthera_206547-1.html > > > > Wow, this will be interesting. Looks like another 4-seat plane similar > to the -10 and Cirrus. > > > > Jae > > > > -------- > > #40533 RV-10 > > First flight 10/19/2011 > > Phase 1 Done 11/26/2011 > > > > > > > > > > Read this topic online here: > > > > http://forums.matronics.com/viewtopic.php?p=371174#371174 > > > > > > > > > > > > > > > > > > > > > > ________________________________ Message 11 ____________________________________ Time: 11:47:28 AM PST US Subject: Re: RV10-List: Video: Pipistrel Panthera Revealed From: Phillip Perry Sexy airplane. I don't know about the economics... $390K for 200knot/10gph airplane is quite a lot. I could fly the RV-10 a lifetime before ever breaking even. That doesn't even include the costs of maintaining/insuring a retract either. Very sexy, but I just don't think it makes sense when compared to what the -10 offers. It's pretty much the ultimate in performance, carrying capacity, and economics. (Even though RV-10's aren't cheap) I'd like to see more details like stalling speed, etc. I suspect it's really really high. Like Lancair high. Phil On Wed, Apr 18, 2012 at 1:31 PM, jchang10 wrote: > > > http://www.avweb.com/avwebflash/exclusivevids/ExclusiveVideo_Aero2012_PipistrelPanthera_206547-1.html > > Wow, this will be interesting. Looks like another 4-seat plane similar to > the -10 and Cirrus. > > Jae > > -------- > #40533 RV-10 > First flight 10/19/2011 > Phase 1 Done 11/26/2011 > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=371174#371174 > > ________________________________ Message 12 ____________________________________ Time: 11:50:31 AM PST US Subject: Re: RV10-List: Video: Pipistrel Panthera Revealed From: Ed Kranz They said 350,000 Euros ($459,000 USD) for a certificated version, 300,000 euros ($393,000 USD) for a kit version. On Wed, Apr 18, 2012 at 1:41 PM, Alan Mekler MD wrote: > > 200 kts on 10gph! > 1000nm range > No price mentioned > > Alan > > Sent from my iPhone > > On Apr 18, 2012, at 2:31 PM, "jchang10" > wrote: > > > > > > > > http://www.avweb.com/avwebflash/exclusivevids/ExclusiveVideo_Aero2012_PipistrelPanthera_206547-1.html > > > > Wow, this will be interesting. Looks like another 4-seat plane similar > to the -10 and Cirrus. > > > > Jae > > > > -------- > > #40533 RV-10 > > First flight 10/19/2011 > > Phase 1 Done 11/26/2011 > > > > > > > > > > Read this topic online here: > > > > http://forums.matronics.com/viewtopic.php?p=371174#371174 > > > > > > > > > > > > > > > > > > > > > > ________________________________ Message 13 ____________________________________ Time: 12:11:22 PM PST US From: Robin Marks Subject: Re: RV10-List: iPad in the cockipt That would be perfect dual sun visor iPads when not using the iPad function but needing the visor you just turn on the rear camera and you get forward facing view while still blocking the sun. Patent anyone? Robin Do Not Archive Sent from the new iPad On Apr 18, 2012, at 11:49 AM, "Jeff Carpenter" > wrote: Any though given to mounting it to the center post along the windscreen? It could double as a sun visor. Jeff Carpenter 40304 On Apr 18, 2012, at 11:12 AM, Alan Mekler MD wrote: Tim, I have mine mounted on the tunnel just in front of the fuel valve. Alan Sent from my iPhone On Apr 18, 2012, at 1:51 PM, "Dawson-Townsend,Timothy" > wrote: iPad users: I'm more inclined to have the iPad in the RV-10 cockpit up in front by the dash somewhere, rather than as a kneeboard. What experience have others had? Is a RAM mount clamped on the edge of the glareshield rigid enough? Other mounting ideas? Tim N52KS 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D href="3D"http://www.matronics.com/Navigator?RV10-List"">http://www.matron ics.com/Navigator?RV10-List 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D href="3D"http://forums.matronics.com"">http://forums.matronics.com 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D href="3D"http://www.matronics.com/contribution"">http://www.matronics.com /contribution 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D ________________________________ Message 14 ____________________________________ Time: 12:44:00 PM PST US Subject: Re: RV10-List: iPad in the cockipt From: Seano I went to recurrent training at flight safety with the Niles owner of rosen v isors. He said they were working on iPad visors. The problem I have is not b eing able to tighten them enough and with the weight of the iPad plus turbul ence it might be difficult. Sent from my iPhone On Apr 18, 2012, at 12:11, Robin Marks wrote: > That would be perfect dual sun visor iPads when not using the iPad functio n but needing the visor you just turn on the rear camera and you get forward facing view while still blocking the sun. Patent anyone? > > Robin > Do Not Archive > > Sent from the new iPad > > On Apr 18, 2012, at 11:49 AM, "Jeff Carpenter" wr ote: > >> Any though given to mounting it to the center post along the windscreen? I t could double as a sun visor. >> >> Jeff Carpenter >> 40304 >> >> >> On Apr 18, 2012, at 11:12 AM, Alan Mekler MD wrote: >> >>> Tim, >>> I have mine mounted on the tunnel just in front of the fuel valve. >>> Alan >>> >>> Sent from my iPhone >>> >>> On Apr 18, 2012, at 1:51 PM, "Dawson-Townsend,Timothy" wrote: >>> >>>> iPad users: >>>> >>>> I'm more inclined to have the iPad in the RV-10 cockpit up in front by t he dash somewhere, rather than as a kneeboard. >>>> >>>> What experience have others had? Is a RAM mount clamped on the edge of the glareshield rigid enough? Other mounting ideas? >>>> >>>> Tim >>>> N52KS >>>> >>>> >>>> >>> >>> >>> 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D >>> href="3D"http://www.matronics.com/Navigator?RV10-List"">http://www.mat ronics.com/Navigator?RV10-List >>> 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D >>> href="3D"http://forums.matronics.com"">http://forums.matronics.com >>> 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D >>> href="3D"http://www.matronics.com/contribution"">http://www.matronics. com/contribution >>> 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D >>> >> >> >> >> p://www.matronics.com/Navigator?RV10-List >> ics.com >> .matronics.com/contribution >> > > ========================== ========= ========================== ========= ========================== ========= ========================== ========= > ________________________________ Message 15 ____________________________________ Time: 12:52:52 PM PST US From: "g.combs" Subject: Re: RV10-List: iPad in the cockipt ________________________________ Message 16 ____________________________________ Time: 01:00:56 PM PST US From: Jesse Saint Subject: Re: RV10-List: iPad in the cockipt Plus, having the iPad in the sun causes it to heat up and lock up (won't let you on until it cools down). I think mounting it on the tunnel with an extension that holds it up at the height of an armrest would be best, but I haven't used one mounted to the panel. I think that would be nice as well. I usually use it on the armrest. As a kneeboard it gets in the way of my stick way too much. Jesse Saint Saint Aviation, Inc. jesse@saintaviation.com C: 352-427-0285 F: 815-377-3694 On Apr 18, 2012, at 3:42 PM, Seano wrote: > I went to recurrent training at flight safety with the Niles owner of rosen visors. He said they were working on iPad visors. The problem I have is not being able to tighten them enough and with the weight of the iPad plus turbulence it might be difficult. > > Sent from my iPhone > > On Apr 18, 2012, at 12:11, Robin Marks wrote: > >> That would be perfect dual sun visor iPads when not using the iPad function but needing the visor you just turn on the rear camera and you get forward facing view while still blocking the sun. Patent anyone? >> >> Robin >> Do Not Archive >> >> Sent from the new iPad >> >> On Apr 18, 2012, at 11:49 AM, "Jeff Carpenter" wrote: >> >>> Any though given to mounting it to the center post along the windscreen? It could double as a sun visor. >>> >>> Jeff Carpenter >>> 40304 >>> >>> >>> On Apr 18, 2012, at 11:12 AM, Alan Mekler MD wrote: >>> >>>> Tim, >>>> I have mine mounted on the tunnel just in front of the fuel valve. >>>> Alan >>>> >>>> Sent from my iPhone >>>> >>>> On Apr 18, 2012, at 1:51 PM, "Dawson-Townsend,Timothy" wrote: >>>> >>>>> iPad users: >>>>> >>>>> I'm more inclined to have the iPad in the RV-10 cockpit up in front by the dash somewhere, rather than as a kneeboard. >>>>> >>>>> What experience have others had? Is a RAM mount clamped on the edge of the glareshield rigid enough? Other mounting ideas? >>>>> >>>>> Tim >>>>> N52KS >>>>> >>>>> >>>>> >>>> >>>> >>>> 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D >>>> href="3D"http://www.matronics.com/Navigator?RV10-List"">http://www.matro nics.com/Navigator?RV10-List >>>> 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D >>>> href="3D"http://forums.matronics.com"">http://forums.matronics.com >>>> 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D >>>> href="3D"http://www.matronics.com/contribution"">http://www.matronics.co m/contribution >>>> 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D >>>> >>> >>> >>> >>> p://www.matronics.com/Navigator?RV10-List >>> ics.com >>> .matronics.com/contribution >>> >> >> >> > > > 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D > 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D > 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D > 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D > ________________________________ Message 17 ____________________________________ Time: 01:01:00 PM PST US Subject: RV10-List: Virtual Hangar Visit From: Ed Kranz Google Plus has something called Hangouts. Basically, it's a very simple to use group video chat that supports up to 9 people. All you need is a webcam and an internet connection. Just for fun, I'm going to create a hangout this evening (4/18/12) while I'm fiddling with my elevators. I'll make it open to the public so even people that I don't have in a circle (Google Plus's version of a group of friends) will be able to join. So please join in! I'd like to meet more of you guys, and this is the best (non text based) way to do some hangar flying I can think of short of actually being there. My Google Plus page is https://plus.google.com/u/0/104915858356518723094, or you can just search Google plus for Ed Kranz. Add me to a circle, as I'd like to get an RV builders circle together. ( I also posted this on VAF, but I'd really like to "meet" some fellow -10 builders) ________________________________ Message 18 ____________________________________ Time: 01:07:19 PM PST US From: Jeff Carpenter Subject: Re: RV10-List: iPad in the cockipt Saaweeet! On Apr 18, 2012, at 12:11 PM, Robin Marks wrote: > That would be perfect dual sun visor iPads when not using the iPad > function but needing the visor you just turn on the rear camera and > you get forward facing view while still blocking the sun. Patent > anyone? > > Robin > Do Not Archive > > Sent from the new iPad > > On Apr 18, 2012, at 11:49 AM, "Jeff Carpenter" > wrote: > >> Any though given to mounting it to the center post along the >> windscreen? It could double as a sun visor. >> >> Jeff Carpenter >> 40304 >> >> >> On Apr 18, 2012, at 11:12 AM, Alan Mekler MD wrote: >> >>> Tim, >>> I have mine mounted on the tunnel just in front of the fuel valve. >>> Alan >>> >>> Sent from my iPhone >>> >>> On Apr 18, 2012, at 1:51 PM, "Dawson-Townsend,Timothy" >> > wrote: >>> >>>> iPad users: >>>> >>>> I'm more inclined to have the iPad in the RV-10 cockpit up in >>>> front by the dash somewhere, rather than as a kneeboard. >>>> >>>> What experience have others had? Is a RAM mount clamped on the >>>> edge of the glareshield rigid enough? Other mounting ideas? >>>> >>>> Tim >>>> N52KS >>>> >>>> >>>> >>> >>> >>> 3D >>> = >>> 3D >>> = >>> 3D >>> = >>> 3D >>> = >>> 3D >>> = >>> 3D >>> = >>> 3D >>> = >>> 3D >>> = >>> 3D >>> = >>> 3D >>> = >>> 3D >>> = >>> 3D >>> = >>> 3D >>> = >>> 3D >>> = >>> 3D >>> = >>> 3D >>> = >>> 3D >>> = >>> 3D >>> = >>> 3D >>> = >>> 3D >>> = >>> 3D >>> = >>> 3D >>> = >>> 3D >>> = >>> 3D===================== >>> href="3D"http://www.matronics.com/Navigator?RV10-List"">http://www.matronics.com/Navigator?RV10-List >>> 3D >>> = >>> 3D >>> = >>> 3D >>> = >>> 3D >>> = >>> 3D >>> = >>> 3D >>> = >>> 3D >>> = >>> 3D >>> = >>> 3D >>> = >>> 3D >>> = >>> 3D >>> = >>> 3D >>> = >>> 3D >>> = >>> 3D >>> = >>> 3D >>> = >>> 3D >>> = >>> 3D >>> = >>> 3D >>> = >>> 3D >>> = >>> 3D >>> = >>> 3D >>> = >>> 3D >>> = >>> 3D >>> = >>> 3D===================== >>> href="3D"http://forums.matronics.com"">http://forums.matronics.com >>> 3D >>> = >>> 3D >>> = >>> 3D >>> = >>> 3D >>> = >>> 3D >>> = >>> 3D >>> = >>> 3D >>> = >>> 3D >>> = >>> 3D >>> = >>> 3D >>> = >>> 3D >>> = >>> 3D >>> = >>> 3D >>> = >>> 3D >>> = >>> 3D >>> = >>> 3D >>> = >>> 3D >>> = >>> 3D >>> = >>> 3D >>> = >>> 3D >>> = >>> 3D >>> = >>> 3D >>> = >>> 3D >>> = >>> 3D===================== >>> href="3D"http://www.matronics.com/contribution"">http://www.matronics.com/contribution >>> 3D >>> = >>> 3D >>> = >>> 3D >>> = >>> 3D >>> = >>> 3D >>> = >>> 3D >>> = >>> 3D >>> = >>> 3D >>> = >>> 3D >>> = >>> 3D >>> = >>> 3D >>> = >>> 3D >>> = >>> 3D >>> = >>> 3D >>> = >>> 3D >>> = >>> 3D >>> = >>> 3D >>> = >>> 3D >>> = >>> 3D >>> = >>> 3D >>> = >>> 3D >>> = >>> 3D >>> = >>> 3D >>> = >>> 3D===================== >>> >> >> >> >> p://www.matronics.com/Navigator?RV10-List >> ics.com >> .matronics.com/contribution >> > > ________________________________ Message 19 ____________________________________ Time: 01:33:14 PM PST US From: "Geoff Combs" Subject: RE: RV10-List: iPad in the cockipt Last email did not go thru lets try again. I have been working on a pop up shelf that will hold a phone under the IPad. I have had this in the airplane for over a year and really like it. I do not use it on take off or landing usually. It can be popped up or down very quickly. I am still refining but getting close. FWIW Geoff Geoff Combs Aerosport Modeling & Design 8090 Howe Industrial Parkway Canal Winchester, Ohio 43110 614-834-5227p 614-834-5230f www.aerosportmodeling.com _____ From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Jeff Carpenter Sent: Wednesday, April 18, 2012 4:06 PM Subject: Re: RV10-List: iPad in the cockipt Saaweeet! On Apr 18, 2012, at 12:11 PM, Robin Marks wrote: That would be perfect dual sun visor iPads when not using the iPad function but needing the visor you just turn on the rear camera and you get forward facing view while still blocking the sun. Patent anyone? Robin Do Not Archive Sent from the new iPad On Apr 18, 2012, at 11:49 AM, "Jeff Carpenter" wrote: Any though given to mounting it to the center post along the windscreen? It could double as a sun visor. Jeff Carpenter 40304 On Apr 18, 2012, at 11:12 AM, Alan Mekler MD wrote: Tim, I have mine mounted on the tunnel just in front of the fuel valve. Alan Sent from my iPhone On Apr 18, 2012, at 1:51 PM, "Dawson-Townsend,Timothy" wrote: iPad users: I'm more inclined to have the iPad in the RV-10 cockpit up in front by the dash somewhere, rather than as a kneeboard. What experience have others had? Is a RAM mount clamped on the edge of the glareshield rigid enough? Other mounting ideas? Tim N52KS 3D=========================3 D=================== href="3D"http://www.matronics..com/Navigator?RV10-List "">http://www.matronics..com/Navigator?RV10-List 3D=========================3 D=================== href="3D"http://forums.matronics.com"">http://forums.matronics.com 3D=========================3 D=================== href="3D"http://www.matronics.com/contribution"">http://www.matronics.com/co ntribution 3D=========================3 D=================== p://www.matronics.com/Navigator?RV10-List ics.com ...matronics.com/contribution href="http://www.matronics.com/Navigator?RV10-List">http://www.matronics..co m/Navigator?RV10-List href="http://forums.matronics.com">http://forums.matronics.com href="http://www.matronics.com/contribution">http://www.matronics.com/contri bution ________________________________ Message 20 ____________________________________ Time: 05:25:29 PM PST US Subject: RV10-List: Re: Measurements Needed - Throttle/Prop/Mixture (Vernier) From: "maca2790" Thanks Sean and thank you Ivan. I think I will have to go with the 3 " extension to all the cables. I'm not sure if Vans will take the others back after 2 years :). Phil I measured my cables but they don,t have the firewall wear sleeves or the Clamp reduced diameter Dimension E. Throttle is 47.5 " Extended Dimension B + C Dim D is 6" (retracted) Prop 72.5" B + C Extended Dim D is 6 " (retracted) Mixture 51.5 B + C and D is 6" (retracted) cheers John MacCallum VH-DUU #41016 Read this topic online here: http://forums.matronics.com/viewtopic.php?p=371226#371226 ________________________________ Message 21 ____________________________________ Time: 05:42:05 PM PST US From: Bill Watson Subject: Re: RV10-List: iPad in the cockipt I like that! I'm using a knee board and it's working well but is less than ideal. My instrument instructor uses a suction cup on the windshield but I don't see that working for the left seat pilot. Plus I don't like the idea of blocking out any of the view (ironic since no matter where you put it, the time spent looking at it effectively blocks the view). I'm working on a center console to enclose an O2 bottle. I'm thinking that a hardpoint for a swivel mount that would enable the ipad to hover over my right knee would be ideal. In the end, that position seems best since it doesn't block any instruments and is comfortable for right hand operation. Bill "old glider guider" Watson http://youtu.be/JYKubzq9r18 On 4/18/2012 3:11 PM, Robin Marks wrote: > That would be perfect dual sun visor iPads when not using the iPad > function but needing the visor you just turn on the rear camera and > you get forward facing view while still blocking the sun. Patent anyone? > > Robin > ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message rv10-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/RV10-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/rv10-list Browse Digests http://www.matronics.com/digest/rv10-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.