---------------------------------------------------------- RV10-List Digest Archive --- Total Messages Posted Tue 07/03/12: 11 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 05:50 AM - Re: drywash recommendation (Rob Kermanj) 2. 07:11 AM - Re: drywash recommendation (Pascal) 3. 07:45 AM - Condition Inspection Checklist (Michael Kraus) 4. 08:02 AM - Re: Condition Inspection Checklist (tsts4) 5. 08:03 AM - Re: Condition Inspection Checklist (Jim Combs) 6. 11:50 AM - Re: Building order (johngoodman) 7. 01:25 PM - Re: Condition Inspection Checklist (Bob Turner) 8. 02:18 PM - Re: IO-540 crankcase breather (nukeflyboy) 9. 06:52 PM - Re: Re: Tire Jack (Michael Sausen) 10. 06:59 PM - Starter relay issue (Michael Sausen) 11. 08:18 PM - Re: Re: Tire Jack (Robin Marks) ________________________________ Message 1 _____________________________________ Time: 05:50:56 AM PST US Subject: Re: RV10-List: drywash recommendation From: Rob Kermanj Thanks David. Iw I'll try both recommendations do far. Rob Kermanj Sent from my iPad On Jul 1, 2012, at 9:03 PM, David Maib wrote: > > I've had very good luck with Wash Wax All. It is available at pilot supply shops and Aircraft Spruce. http://www.washwax.com/products/Wash+Wax+ALL+Cleaner.html > > David Maib > 40559 > Flying > Transition Trainer > > On Jul 1, 2012, at 7:47 PM, Rob Kermanj wrote: > > > > Any recommendations for a good aircraft dry-wash? > > Thanks. > > do not archive. > > > > > > > > > ________________________________ Message 2 _____________________________________ Time: 07:11:22 AM PST US From: "Pascal" Subject: Re: RV10-List: drywash recommendation Report back with your findings after you have used both products. Thx Pascal -----Original Message----- From: Rob Kermanj Sent: Tuesday, July 03, 2012 5:57 AM Subject: Re: RV10-List: drywash recommendation Thanks David. Iw I'll try both recommendations do far. Rob Kermanj Sent from my iPad On Jul 1, 2012, at 9:03 PM, David Maib wrote: > > I've had very good luck with Wash Wax All. It is available at pilot supply > shops and Aircraft Spruce. > http://www.washwax.com/products/Wash+Wax+ALL+Cleaner.html > > David Maib > 40559 > Flying > Transition Trainer > > On Jul 1, 2012, at 7:47 PM, Rob Kermanj wrote: > > > > Any recommendations for a good aircraft dry-wash? > > Thanks. > > do not archive. > > ________________________________ Message 3 _____________________________________ Time: 07:45:08 AM PST US From: Michael Kraus Subject: RV10-List: Condition Inspection Checklist Does anyone have a good condition inspection checklist available? I had a good one from my RV-4 that I have converted for use on my RV-10, but thought I'd cross reference it with other good ones to make a master checklist of my liking. Thanks Michael Kraus RV-10 Flying ________________________________ Message 4 _____________________________________ Time: 08:02:15 AM PST US Subject: RV10-List: Re: Condition Inspection Checklist From: "tsts4" Here's mine that I modified from one that I got from A&P Brian Wallis over on VAF. -------- Todd Stovall 728TT (reserved) RV-10 Empacone, Wings, Fuse www.mykitlog.com/auburntsts Read this topic online here: http://forums.matronics.com/viewtopic.php?p=377142#377142 Attachments: http://forums.matronics.com//files/728tt_annual_condition_inspection_checklist_181.doc ________________________________ Message 5 _____________________________________ Time: 08:03:56 AM PST US Subject: Re: RV10-List: Condition Inspection Checklist From: Jim Combs Here is Mine. Jim C N312F On Tue, Jul 3, 2012 at 10:44 AM, Michael Kraus wrote: > > > > Does anyone have a good condition inspection checklist available? I had a > good one from my RV-4 that I have converted for use on my RV-10, but > thought I'd cross reference it with other good ones to make a master > checklist of my liking. > > Thanks > > Michael Kraus > RV-10 Flying > > ________________________________ Message 6 _____________________________________ Time: 11:50:47 AM PST US Subject: RV10-List: Re: Building order From: "johngoodman" Get your wiring and pneumatic tubing in BEFORE it's up on the legs and BEFORE the canopy is on - unless you are a contortionist.... John -------- #40572 Phase One complete and flying. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=377163#377163 ________________________________ Message 7 _____________________________________ Time: 01:25:34 PM PST US Subject: RV10-List: Re: Condition Inspection Checklist From: "Bob Turner" Although not part of the requirements for the condition inspection, this is a very convenient time to test the ELT, and write it into the records. -------- Bob Turner RV-10 QB Read this topic online here: http://forums.matronics.com/viewtopic.php?p=377172#377172 ________________________________ Message 8 _____________________________________ Time: 02:18:05 PM PST US Subject: RV10-List: Re: IO-540 crankcase breather From: "nukeflyboy" I was consistently getting 2-3 drops of oil on the hanger floor where it ran down from the breather tube to the exhaust pipe. I installed Van's breather (slime fighter I think) and it has stopped it completely. -------- Dave Moore RV-6 flying RV-10 QB - flying Read this topic online here: http://forums.matronics.com/viewtopic.php?p=377174#377174 ________________________________ Message 9 _____________________________________ Time: 06:52:41 PM PST US From: Michael Sausen Subject: RE: RV10-List: Re: Tire Jack Yep, Alex sells them... http://www.rvtraining.com/html/atp/html/accessories.html Michael -----Original Message----- From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Robin Marks Sent: Sunday, July 01, 2012 6:28 PM Subject: RE: RV10-List: Re: Tire Jack I recall a leaver arm and wire cable set up that worked on the 2 place RV's. Sorry no further info but seemed to be a nifty design and easy to replicate in your shop if so inclined. Robin -----Original Message----- From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Bob Turner Sent: Sunday, July 01, 2012 3:01 PM Subject: RV10-List: Re: Tire Jack Isn't that thing in the way of changing a tire? Looks like you still need a jack stand somewhere? Also I think our axles are solid? -------- Bob Turner RV-10 QB Read this topic online here: http://forums.matronics.com/viewtopic.php?p=377009#377009 ________________________________ Message 10 ____________________________________ Time: 06:59:58 PM PST US From: Michael Sausen Subject: RV10-List: Starter relay issue Has anyone else had any issues recently with the tabs on the starter bein g narrower than the predefined nutplates allow? I just got a relay from Air craft Spruce and it looks to be =BC to =BD inch too narrow and there is no overlap for a bolt at all. I checked Vans site in case there is a differen ce but the picture on there looks to be the same as the one I just got from Spruce. Michael ________________________________ Message 11 ____________________________________ Time: 08:18:37 PM PST US From: Robin Marks Subject: Re: RV10-List: Re: Tire Jack Looks like a nice system but a bit long for travel. Michael do you use one on your 10? Robin Sent from the new iPad On Jul 3, 2012, at 6:59 PM, "Michael Sausen" wrote: > > Yep, Alex sells them... > > http://www.rvtraining.com/html/atp/html/accessories.html > > Michael > > -----Original Message----- > From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Robin Marks > Sent: Sunday, July 01, 2012 6:28 PM > To: rv10-list@matronics.com > Subject: RE: RV10-List: Re: Tire Jack > > > I recall a leaver arm and wire cable set up that worked on the 2 place RV's. Sorry no further info but seemed to be a nifty design and easy to replicate in your shop if so inclined. > > Robin > > -----Original Message----- > From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Bob Turner > Sent: Sunday, July 01, 2012 3:01 PM > To: rv10-list@matronics.com > Subject: RV10-List: Re: Tire Jack > > > Isn't that thing in the way of changing a tire? Looks like you still need a jack stand somewhere? > Also I think our axles are solid? > > -------- > Bob Turner > RV-10 QB > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=377009#377009 > > > > > > > > > > > > > > > > > > > > > > ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message rv10-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/RV10-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/rv10-list Browse Digests http://www.matronics.com/digest/rv10-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.