---------------------------------------------------------- RV10-List Digest Archive --- Total Messages Posted Sun 08/26/12: 7 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 06:07 AM - Interior Window Transitions (Phillip Perry) 2. 07:23 AM - Re: Interior Window Transitions (g.combs) 3. 07:36 AM - Re: Interior Window Transitions (johngoodman) 4. 07:42 AM - Re: Travel canopy cover recommendations (David Leikam) 5. 09:06 AM - Re: Interior Window Transitions (Dave Saylor) 6. 09:13 AM - Re: Interior Window Transitions (dmaib@me.com) 7. 10:51 AM - Re: Travel canopy cover recommendations (Alan Mekler MD) ________________________________ Message 1 _____________________________________ Time: 06:07:44 AM PST US Subject: RV10-List: Interior Window Transitions From: Phillip Perry I'm finishing off the inside of the doors and I'm looking to put a fillet around the interior window transition. I've been thinking about using 3M 4200 (or maybe even 5200) and creating a bead with my finger. And I've also been thinking about using an Acrylic Latex Caulk (like this) to lay down the fillet too. Before I use one of these, I want to feel pretty confident that I'm not going to cause crazing of the window and I don't have any spare pieces of glass laying around to test with. The best I can tell, the documentation doesn't directly call out usage on acrylic glass. Have any of you used these on your windows? And if not, what did you use to create a nice, consistent fillet all the way around the transition? Thanks, Phil ________________________________ Message 2 _____________________________________ Time: 07:23:22 AM PST US Subject: Re: RV10-List: Interior Window Transitions From: "g.combs" Phil the lord urethane adhesive works really Good for this. You can paint it also. Geoff Sent from my iPhone On Aug 26, 2012, at 9:06 AM, Phillip Perry wrote: > I'm finishing off the inside of the doors and I'm looking to put a fillet a round the interior window transition. > > I've been thinking about using 3M 4200 (or maybe even 5200) and creating a bead with my finger. And I've also been thinking about using an Acrylic La tex Caulk (like this) to lay down the fillet too. > > Before I use one of these, I want to feel pretty confident that I'm not go ing to cause crazing of the window and I don't have any spare pieces of glas s laying around to test with. The best I can tell, the documentation doesn' t directly call out usage on acrylic glass. > > Have any of you used these on your windows? And if not, what did you use t o create a nice, consistent fillet all the way around the transition? > > Thanks, > Phil > > > ========================== ========= ========================== ========= ========================== ========= ========================== ========= > ________________________________ Message 3 _____________________________________ Time: 07:36:23 AM PST US Subject: RV10-List: Re: Interior Window Transitions From: "johngoodman" Phil, I'd be reluctant to use a "caulk" type trim - might be hard to get off and it might make a real mess. Most folks use a fabric edge trim. If you need to fill in a gap between the window and the trim welt (like I did) they make lots of nice tiny "rope" trim in different colors - such as black. Contact cement is all you need. If you REALLY want to spruce it up, look up Pom Pom Fringe Trim... (g) John [Laughing] -------- #40572 Phase One complete and flying. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=381878#381878 ________________________________ Message 4 _____________________________________ Time: 07:42:33 AM PST US From: David Leikam Subject: Re: RV10-List: Travel canopy cover recommendations Flighline. Abby is fantastic. Dave Leikam On Aug 25, 2012, at 10:30 AM, Rene wrote: > I also agree=85=85.I love my flightline cover. > > From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Preid > Sent: Saturday, August 25, 2012 8:51 AM > To: rv10-list@matronics.com > Subject: Re: RV10-List: Travel canopy cover recommendations > > Agree! > > Sent from my iPhone > > On Aug 25, 2012, at 7:25 AM, Seano wrote: > > I recommend Flightline's lightweight cover too. > > Sent from my iPhone > > On Aug 25, 2012, at 8:16, Don Mc Donald wrote: > > Tim, although I almost always agree with you... but I think you should have said "when I travel with 4 in the plane".... because with only 2 traveling, there's always plenty of room for the cover. > Don McDonald > > Sent from my iPad > > On Aug 25, 2012, at 6:46 AM, Tim Olson wrote: > > It's definitely not a "Travel" cover though....those things are at least 3X the size to pack and probably more than 3x the weight. They are nice, but if I had to travel with it, I'd never bring it....I never have that much space left for a huge cover. > Tim > > > > On Aug 25, 2012, at 8:33 AM, Michael Kraus wrote: > > I have a Bruce's Custom Cover. I would not say it is the lightest, but it didn't let one drop of rain in the huge downpour at Oshkosh. > > I had a similar one on my RV-4 and liked it so much I bought one for my RV-10. > > -Mike Kraus > RV-10 Flying > KitFox SS7 - building > > Sent from my iPhone > > On Aug 25, 2012, at 8:47 AM, "Carl Froehlich" wrote: > > All, > > Looking for a travel cover for the RV-10. I note the Van=92s offering http://vansaircraft.com/cgi-bin/store.cgi?ident=1345898181-352-438&brows e=airframe&product=canopy-covers and the Cleaveland Tool listinghttp://www.cleavelandtool.com/prodinfo.asp?number=RVCC10 > > Recommendations between these two or perhaps other choices? > > Thanks, > Carl > 38.4 hours ' final test period flight today if the weather cooperates > > > > ========= > ://www.matronics.com/Navigator?RV10-List > ========= > cs.com > ========= > matronics.com/contribution > ========= > > > > ========= > ://www.matronics.com/Navigator?RV10-List > ========= > cs.com > ========= > matronics.com/contribution > ========= > > > > href="http://www.matronics.com/Navigator?RV10-List">http://www.matronhre f="http://forums.matronics.com">http://forums.matronics.com > href="http://www.matronics.com/contribution">http://www.matronics.com/co ntribution > > > > ======================== > ://www.matronics.com/Navigator?RV10-List > ======================== > cs.com > ======================== > matronics.com/contribution > ======================== > > > > ======================== > ://www.matronics.com/Navigator?RV10-List > ======================== > cs.com > ======================== > matronics.com/contribution > ======================== > > > > < - The RV10-List Email Forum Use the Matronics List Features Navigator to browse > http://www.matronics.com/Navigator?RV10-List > http://forums.matronics.com > http://www.matronics.com/contribution > > > > > ________________________________ Message 5 _____________________________________ Time: 09:06:24 AM PST US From: Dave Saylor Subject: Re: RV10-List: Interior Window Transitions Proseal would work. It's paintable. Or just epoxy with micro. Dave Saylor 831-750-0284 CL On Sun, Aug 26, 2012 at 6:06 AM, Phillip Perry wrote: > I'm finishing off the inside of the doors and I'm looking to put a fillet > around the interior window transition. > > I've been thinking about using 3M 4200 (or maybe even 5200) and creating a > bead with my finger. And I've also been thinking about using an Acrylic > Latex Caulk (like this) to lay down the fillet too. > > Before I use one of these, I want to feel pretty confident that I'm not > going to cause crazing of the window and I don't have any spare pieces of > glass laying around to test with. The best I can tell, the documentation > doesn't directly call out usage on acrylic glass. > > Have any of you used these on your windows? And if not, what did you use to > create a nice, consistent fillet all the way around the transition? > > Thanks, > Phil > > ________________________________ Message 6 _____________________________________ Time: 09:13:51 AM PST US Subject: RV10-List: Re: Interior Window Transitions From: "dmaib@me.com" I used proseal with the help of a good buddy who is a proseal wizard. It looks great. -------- David Maib RV-10 #40559 Transition Trainer New Smyrna Beach, FL Read this topic online here: http://forums.matronics.com/viewtopic.php?p=381889#381889 ________________________________ Message 7 _____________________________________ Time: 10:51:08 AM PST US From: Alan Mekler MD Subject: Re: RV10-List: Travel canopy cover recommendations Does anyone know who makes sunshields for the RV-10? I had Kennon in my Mooney but they don't offer them for the 10. Alan N668G 157 hrs On Aug 25, 2012, at 9:33 AM, Michael Kraus wrote: > I have a Bruce's Custom Cover. I would not say it is the lightest, but it didn't let one drop of rain in the huge downpour at Oshkosh. > > I had a similar one on my RV-4 and liked it so much I bought one for my RV-10. > > -Mike Kraus > RV-10 Flying > KitFox SS7 - building > > Sent from my iPhone > > On Aug 25, 2012, at 8:47 AM, "Carl Froehlich" wrote: > >> All, >> >> Looking for a travel cover for the RV-10. I note the Van=92s offering http://vansaircraft.com/cgi-bin/store.cgi?ident=1345898181-352-438&brows e=airframe&product=canopy-covers and the Cleaveland Tool listing http://www.cleavelandtool.com/prodinfo.asp?number=RVCC10 >> >> Recommendations between these two or perhaps other choices? >> >> Thanks, >> Carl >> 38.4 hours ' final test period flight today if the weather cooperates >> >> >> >> ======================== >> ://www.matronics.com/Navigator?RV10-List >> ======================== >> cs.com >> ======================== >> matronics.com/contribution >> ======================== >> > > > ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message rv10-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/RV10-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/rv10-list Browse Digests http://www.matronics.com/digest/rv10-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.