----------------------------------------------------------
                           RV10-List Digest Archive
                                      ---
                     Total Messages Posted Mon 12/03/12: 4
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 05:16 AM - Re: Re: Upper Fwd Fuselage Sec 31  (Rick Lark)
     2. 07:10 AM - Re: Adel Clamps  (hotwheels)
     3. 09:10 AM - Re: RV10-List Digest: 4 Msgs - 12/02/12  (Fred Williams)
     4. 07:53 PM - Re: Re: RV10-List Digest: 4 Msgs - 12/02/12  (Robin Marks)
 
 
 
________________________________  Message 1  _____________________________________


Time: 05:16:51 AM PST US
Subject: Re: RV10-List: Re: Upper Fwd Fuselage Sec 31
From: Rick Lark <larkrv10@gmail.com>

Ron, I finally got around to looking again, and you are right.  Thx,   Rick

On Sat, Dec 1, 2012 at 11:25 AM, Ron B. <ronbelliveau@eastlink.ca> wrote:

>
> I do believe that 31Q was for the optional throttle quadrant mount.If you
> look at pn/F-1083 on page 31-9 you'll see that it's mounted different. I
> don't remember but it might also be a different part (I'm only looking at
> plan 31 as I don't have 31Q in front of me.
> Ron
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=389672#389672
>
>

________________________________  Message 2  _____________________________________


Time: 07:10:15 AM PST US
Subject: RV10-List: Re: Adel Clamps
From: "hotwheels" <jaybrinkmeyer@yahoo.com>


Lots of -12s on the smaller tubes and -14s on the larger ones... I always seem
to run out of -12s. 

Cheers,
Jay


Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=389741#389741


________________________________  Message 3  _____________________________________


Time: 09:10:55 AM PST US
Subject: RV10-List: Re: RV10-List Digest: 4 Msgs - 12/02/12
From: Fred Williams <drfred1960@gmail.com>

Wdg 12 is correct for the engine mount bars.  Order at least a dozen.

________________________________  Message 4  _____________________________________


Time: 07:53:14 PM PST US
From: Robin Marks <robin@PaintTheWeb.com>
Subject: RE: RV10-List: Re: RV10-List Digest: 4 Msgs - 12/02/12

Thanks all. I have placed an order and will likely have enough for the next
 project.

Robin
Do Not Archive

From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@m
atronics.com] On Behalf Of Fred Williams
Sent: Monday, December 03, 2012 9:10 AM
Subject: RV10-List: Re: RV10-List Digest: 4 Msgs - 12/02/12


Wdg 12 is correct for the engine mount bars.  Order at least a dozen.


rsbooks.com>

m>


 

-------------------------------------------------------------------------------------
                       Other Matronics Email List Services
-------------------------------------------------------------------------------------
Post A New Message               rv10-list@matronics.com
UN/SUBSCRIBE                     http://www.matronics.com/subscription
List FAQ                         http://www.matronics.com/FAQ/RV10-List.htm
Web Forum Interface To Lists     http://forums.matronics.com
Matronics List Wiki              http://wiki.matronics.com
Full Archive Search Engine       http://www.matronics.com/search
7-Day List Browse                http://www.matronics.com/browse/rv10-list
Browse Digests                   http://www.matronics.com/digest/rv10-list
Browse Other Lists               http://www.matronics.com/browse
Live Online Chat!                http://www.matronics.com/chat
Archive Downloading              http://www.matronics.com/archives
Photo Share                      http://www.matronics.com/photoshare
Other Email Lists                http://www.matronics.com/emaillists
Contributions                    http://www.matronics.com/contribution
-------------------------------------------------------------------------------------

These Email List Services are sponsored solely by Matronics and through the 
generous Contributions of its members.