---------------------------------------------------------- RV10-List Digest Archive --- Total Messages Posted Mon 12/10/12: 5 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 09:36 AM - 2012 List of Contributors (Matt Dralle) 2. 06:17 PM - PCU5000-X (Jeff Carpenter) 3. 06:42 PM - Re: PCU5000-X (Pascal) 4. 06:51 PM - Re: PCU5000-X (Carl Froehlich) 5. 06:58 PM - Re: PCU5000-X (Kelly McMullen) ________________________________ Message 1 _____________________________________ Time: 09:36:08 AM PST US From: Matt Dralle Subject: RV10-List: 2012 List of Contributors Dear Listers, The 2012 Matronics Email List and Forum Fund Raiser officially ended about a week ago and its time that I publish this year's List of Contributors. It is the people on this list that directly make the Email Lists and Forums possible! Their generous Contributions keep the servers and Internet connection up and running! You can still show your support this year and pick up a great gift at the same time. The Contribution Web Site is fast, easy, and secure: http://www.matronics.com/contribution Or, by dropping a personal check in the mail to: Matt Dralle / Matronics 581 Jeannie Way Livermore CA 94550 I also want to thank Bob, Jon, and Andy for their generous support through the supply of great gifts this year!! These guys have some excellent products and I encourage you to visit their respective web sites: Bob Nucklolls - AeroElectric - http://www.aeroelectric.com Jon Croke - HomebuiltHELP - http://www.homebuilthelp.com Andy Gold - The Builder's Bookstore - http://www.buildersbooks.com And finally, I'm proud to present The 2012 Fund Raiser List of Contributors: http://www.matronics.com/loc/2012.html Thanks again to everyone that made a Contribution this year!! Matt Dralle Matronics Email List and Forum Administrator ________________________________ Message 2 _____________________________________ Time: 06:17:34 PM PST US From: Jeff Carpenter Subject: RV10-List: PCU5000-X For those of you with the PCU5000-X and the YIO-540-D4A5, who routed cables per the vans FF instructions, what counter lever rotation and what clocking angle did you specify (if you got it right)? Jeff Carpenter 40304 ________________________________ Message 3 _____________________________________ Time: 06:42:19 PM PST US From: "Pascal" Subject: Re: RV10-List: PCU5000-X I=99ll look tomorrow and take a picture. Pascal From: Jeff Carpenter Sent: Monday, December 10, 2012 6:16 PM Subject: RV10-List: PCU5000-X For those of you with the PCU5000-X and the YIO-540-D4A5, who routed cables per the vans FF instructions, what counter lever rotation and what clocking angle did you specify (if you got it right)? Jeff Carpenter 40304 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D ________________________________ Message 4 _____________________________________ Time: 06:51:28 PM PST US From: "Carl Froehlich" Subject: RE: RV10-List: PCU5000-X I found a photo taken during baffle fabrication (I made mine as I'm using a plenum). Don't know how much different, if any this will be if you use the Van's baffle kit. Please look beyond the temporary hardware in the photo. The listed Van's mixture and governor cables were the correct length (I am not using a quadrant), but the Van's recommended throttle cable was too short. I got the 50.5" throttle cable that Van's list for the RV-7 and it worked fine. Carl RV-10 (60 hours) RV-8A (700 hours) From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Jeff Carpenter Sent: Monday, December 10, 2012 9:17 PM Subject: RV10-List: PCU5000-X For those of you with the PCU5000-X and the YIO-540-D4A5, who routed cables per the vans FF instructions, what counter lever rotation and what clocking angle did you specify (if you got it right)? Jeff Carpenter 40304 D======================== ========= D======================== ========= D======================== ========= D======================== ========= ________________________________ Message 5 _____________________________________ Time: 06:58:36 PM PST US From: Kelly McMullen Subject: Re: RV10-List: PCU5000-X For those that chose the PCU5000, do you feel it is worth the extra several hundred over an MT or Hartzell governor? I'm finding so far that I can get the MT prop with MT governor as a package at significantly better price than if I have by PCU5000 separate from the prop. What features do you consider significantly better with the PCU5000? Kelly On 12/10/2012 7:51 PM, Carl Froehlich wrote: > > I found a photo taken during baffle fabrication (I made mine as Im > using a plenum). Dont know how much different, if any this will be if > you use the Vans baffle kit. Please look beyond the temporary > hardware in the photo. > > The listed Vans mixture and governor cables were the correct length > (I am not using a quadrant), but the Vans recommended throttle cable > was too short. I got the 50.5 throttle cable that Vans list for the > RV-7 and it worked fine. > > Carl > > RV-10 (60 hours) > > RV-8A (700 hours) > > *From:*owner-rv10-list-server@matronics.com > [mailto:owner-rv10-list-server@matronics.com] *On Behalf Of *Jeff > Carpenter > *Sent:* Monday, December 10, 2012 9:17 PM > *To:* rv10-list@matronics.com > *Subject:* RV10-List: PCU5000-X > > For those of you with the PCU5000-X and the YIO-540-D4A5, who routed > cables per the vans FF instructions, what counter lever rotation and > what clocking angle did you specify (if you got it right)? > > Jeff Carpenter > > 40304 > > * * > * * > ** > ** > ** > ** > ** > ** > ** > ** > ** > ** > *www.aeroelectric.com* > *www.buildersbooks.com* > *www.homebuilthelp.com* > ** > ** > ** > *http://www.matronics.com/contribution* > ** > ** > ** > ** > ** > ** > ** > ** > ** > ** > ** > ** > *http://www.matronics.com/Navigator?RV10-List* > ** > ** > ** > ** > ** > *http://forums.matronics.com* > ** > ** > * * ----- No virus found in this message. Checked by AVG - www.avg.com ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message rv10-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/RV10-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/rv10-list Browse Digests http://www.matronics.com/digest/rv10-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.