Today's Message Index:
----------------------
1. 02:38 PM - Re: Placement and dimensions of access door for HW ER tanks (Dave Bowman)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Placement and dimensions of access door for HW ER tanks |
Duane,
I have the Hotel-Whiskey tanks installed in my 10 and the distances are:
>From the rib to the outside of the tank= 6 7/16 inches.
>From the edge of the top skin to the outboard edge of the door= 6 13/16
inches.
Can send pictures if you would like.
Dave Bowman
-----Original Message-----
From: Duane Wilson
Sent: Monday, February 11, 2013 6:55 PM
Subject: RV10-List: Placement and dimensions of access door for HW ER tanks
I need some dimensions for the access door in each wingtip for the
Hotel-Whiskey extended range tanks.
The wings are 250 miles away, but the wing tips are on the table in front of
me.
I marked the center of the fill cap position on the external surface of the
wingtip, but did not mark the outboard edge of the tank on the external
surface.
Does anyone have access to the measurement from the outboard rib to the
outboard edge of the ER tank? Or, even easier, what is the distance from
the edge of the top aluminum skin to the outboard edge of the access door?
Thanks
dwilson
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|