---------------------------------------------------------- RV10-List Digest Archive --- Total Messages Posted Tue 02/26/13: 4 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 04:04 AM - Re: Fuel Lines (Rick Lark) 2. 04:48 AM - Re: Window tint film (Jesse Saint) 3. 12:43 PM - Re: Window tint film (woxofswa) 4. 07:25 PM - Re: Fuel Lines (bill.peyton) ________________________________ Message 1 _____________________________________ Time: 04:04:35 AM PST US Subject: Re: RV10-List: Fuel Lines From: Rick Lark Sean/Dave, thx for the info. I'm heading to Aircraft Spruce today and will take the straight fitting with me and see if they will exchange it. For the record, I did not buy Vans engine hoses, so the custom hose option is still open. Regards, Rick On Mon, Feb 25, 2013 at 10:46 PM, Sean Stephens wrote: > > The reason for the 45 degree fitting or 45 degree hose end is because the > engine mount and nose gear isolators are right to the left of and in front > of that fitting. The angle allows the hose to loop out and around the > engine mount and isolators before heading on its way to the engine driven > fuel pump. > > -Sean #40303 (adding controls and fuel lines to engine) > > On 2/25/13 9:20 PM, Dave Saylor wrote: > >> gmail.com > >> >> You should be OK but it might mean getting something other than the >> hose provided by Vans (Bonaco could make one). You can get a custom >> hose with a 45* or 90* fitting built in to the end. You did good by >> changing the provided aluminum fitting to steel. >> >> Dave Saylor >> 831-750-0284 CL >> >> >> On Mon, Feb 25, 2013 at 3:56 PM, Rick Lark wrote: >> >>> Hey all >>> >>> I started to fabricate the fuel lines in the tunnel etc today and where I >>> attached the line to the firewall, I recently bought a AN832 steel >>> bulkhead >>> fitting (straight) instead of an AN837 bulkhead fitting (45 degree). For >>> those that have installed the fuel line to the engine, can I get away >>> with >>> the straight fitting or should I return it for the 45 degree fitting? I >>> intend to mount the fuel flow transducer under the engine (if that >>> helps). >>> >>> Thx, Rick >>> #40956 >>> Southampton, Ont >>> >>> >>> >> >> >> > > ________________________________ Message 2 _____________________________________ Time: 04:48:16 AM PST US Subject: Re: RV10-List: Window tint film From: Jesse Saint =46rom my uncle that does window tinting, re plexiglass tinting: Call Johnson Window films 800 448 8468. It will only form in one direction n ot two if I remember right. Jesse Saint I-TEC, Inc. jesse@itecusa.org www.itecusa.org www.mavericklsa.com C: 352-427-0285 O: 352-465-4545 F: 815-377-3694 Sent from my iPhone On Feb 25, 2013, at 10:56 PM, "woxofswa" wrote: > > Anybody have a source for window tint film that will work on plexi? > I know it exits, I just haven't found any. Our old Socata had it on top ha lves of the windows and it worked fine. Unfortunately, the FBO that had it i nstalled is OTS so I can't get a reference from them. > I've seen Cirri and Velocities with it, so it must exist somewhere. > > -------- > Myron Nelson > Mesa, AZ > Emp completed, QB wings completed, legacy build fuse on gear. Finishing k it and FWF kit in progress. > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=395057#395057 > > > > > > > ========================== ========= ========================== ========= ========================== ========= ========================== ========= > > > ________________________________ Message 3 _____________________________________ Time: 12:43:27 PM PST US Subject: RV10-List: Re: Window tint film From: "woxofswa" Thanks Jesse, I called them. They don't have any product that will work but they did steer me towards a static cling product that might. I'm just at the exploratory stage right now and don't need it for months, but I will report back. -------- Myron Nelson Mesa, AZ Emp completed, QB wings completed, legacy build fuse on gear. Finishing kit and FWF kit in progress. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=395125#395125 ________________________________ Message 4 _____________________________________ Time: 07:25:00 PM PST US Subject: RV10-List: Re: Fuel Lines From: "bill.peyton" Rick, Here is how it looks coming out of the firewall to the pump -------- Bill WA0SYV Aviation Partners, LLC Read this topic online here: http://forums.matronics.com/viewtopic.php?p=395147#395147 Attachments: http://forums.matronics.com//files/img_2522_859.jpg ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message rv10-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/RV10-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/rv10-list Browse Digests http://www.matronics.com/digest/rv10-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.