---------------------------------------------------------- RV10-List Digest Archive --- Total Messages Posted Wed 06/12/13: 13 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 02:10 AM - Re: MT Propeller (dmaib@me.com) 2. 06:57 AM - Re: MT Propeller (Craig Rufi) 3. 10:22 AM - Hartzell Governor (bill.peyton) 4. 10:23 AM - Re: Hartzell Governor with C2YR Prop (bill.peyton) 5. 11:26 AM - Hosting change (Tim Olson) 6. 11:32 AM - Re: Inspection Camera (Jim Berry) 7. 01:56 PM - Re: Hartzell Governor (Patrick Pulis) 8. 03:26 PM - Re: Hartzell Governor (Robin Marks) 9. 03:34 PM - Re: Re: Hartzell Governor with C2YR Prop (debra EVERETT) 10. 03:45 PM - Re: Hartzell Governor (Bob Leffler) 11. 04:41 PM - Re: MT Propeller (mds4878) 12. 06:23 PM - Re: Hartzell Governor with C2YR Prop (bill.peyton) 13. 06:43 PM - Re: Re: Hartzell Governor with C2YR Prop (Bob Leffler) ________________________________ Message 1 _____________________________________ Time: 02:10:15 AM PST US Subject: RV10-List: Re: MT Propeller From: "dmaib@me.com" Mike, I found this number for Jim. 805-795-5377 -------- David Maib RV-10 #40559 Transition Trainer New Smyrna Beach, FL Read this topic online here: http://forums.matronics.com/viewtopic.php?p=402545#402545 ________________________________ Message 2 _____________________________________ Time: 06:57:48 AM PST US Subject: Re: RV10-List: MT Propeller From: Craig Rufi I have a number for Jim,but it is at the airport. I will send it to you today. I think he is still at Oxnard airport,but have not seen him in over a year.Craig On Tue, Jun 11, 2013 at 7:12 PM, mds4878 wrote: > > Is Lessdrag with Jim Ayers still around? Where else can a good deal be > found on a MT 3 blade propeller for a RV10? > > -------- > RV-10 #40447 > Fuselage almost done. > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=402535#402535 > > ________________________________ Message 3 _____________________________________ Time: 10:22:34 AM PST US Subject: RV10-List: Hartzell Governor From: "bill.peyton" I have the Hartzell governor. You have to replace the arm if you are using the throttle quadrant. If you do not, you will get about half the travel on the quadrant, and half the leverage. Yes, it will work with the stock arm, but it looks unprofessional when used in conjunction with the quadrant. I have not had any issues after 150 hours. -------- Bill WA0SYV Aviation Partners, LLC Read this topic online here: http://forums.matronics.com/viewtopic.php?p=402560#402560 ________________________________ Message 4 _____________________________________ Time: 10:23:20 AM PST US Subject: RV10-List: Re: Hartzell Governor with C2YR Prop From: "bill.peyton" I have the Hartzell governor. You have to replace the arm if you are using the throttle quadrant. If you do not, you will get about half the travel on the quadrant, and half the leverage. Yes, it will work with the stock arm, but it looks unprofessional when used in conjunction with the quadrant. I have not had any issues after 150 hours. -------- Bill WA0SYV Aviation Partners, LLC Read this topic online here: http://forums.matronics.com/viewtopic.php?p=402561#402561 ________________________________ Message 5 _____________________________________ Time: 11:26:41 AM PST US From: Tim Olson Subject: RV10-List: Hosting change Being forced to change my website hosting. Shopping for a hosting provider....just a heads up that the site may be suddenly gone until I find one. Tim ________________________________ Message 6 _____________________________________ Time: 11:32:42 AM PST US Subject: RV10-List: Re: Inspection Camera From: "Jim Berry" Jim I saw your post on the RV-10 list concerning these cameras. Can you provide a little information on how they work? For instance, how big is the camera probe? Can the picture be rotated while viewing, to avoid seeing things upside down or sideways? Can the camera angle be changed in order to look at a valve face that might be at an angle to the spark plug hole? Perhaps a link to the manufacturer's website to view the user manual? Any info would be appreciated. Bill Reining, Oakland CA RV-10 40514 Bill, I thought your questions might be of interest to others, so I am posting my response here. The probe will easily fit through a Lyc. plug hole. I can measure the exact diameter next time I am at the hangar. The picture can be rotated. The camera angle is not adjustable, but the field of view is wide enough that you can see everything within the cylinders i.e. piston head, cylinder walls, head, both valves and seats, plug holes. No blind spots. I did not receive, and could not find a users manual. I believe these cameras were made through the 90's. the company has been sold and changed directions. Jim Berry RV-10 Read this topic online here: http://forums.matronics.com/viewtopic.php?p=402564#402564 ________________________________ Message 7 _____________________________________ Time: 01:56:58 PM PST US Subject: Re: RV10-List: Hartzell Governor From: Patrick Pulis Bill Where did you source the new governor arm from please, as I'm installing the quadrant? Do you have a part number? Warm regards Patrick Pulis Adelaide, South Australia #40299 On 13/06/2013, at 2:51, "bill.peyton" wrote: > > I have the Hartzell governor. You have to replace the arm if you are using the throttle quadrant. If you do not, you will get about half the travel on the quadrant, and half the leverage. Yes, it will work with the stock arm, but it looks unprofessional when used in conjunction with the quadrant. > I have not had any issues after 150 hours. > > -------- > Bill > WA0SYV > Aviation Partners, LLC > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=402560#402560 > > > > > > > > > > ________________________________ Message 8 _____________________________________ Time: 03:26:26 PM PST US From: Robin Marks Subject: RE: RV10-List: Hartzell Governor This bracket went on my prop governor when we put to Showplanes Cowl & Van' s Baffles on the -10. Looks good in place. Not sure if it's right for other setups. http://www.showplanes.com/ecom-prodshow/Propeller-Governor-Control-Bracket. html [Propeller Governor Control Bracket] [Propeller Governor Control Bracket] Robin -----Original Message----- From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@m atronics.com] On Behalf Of Patrick Pulis Sent: Wednesday, June 12, 2013 1:56 PM Subject: Re: RV10-List: Hartzell Governor --> > Bill Where did you source the new governor arm from please, as I'm installing th e quadrant? Do you have a part number? Warm regards Patrick Pulis Adelaide, South Australia #40299 On 13/06/2013, at 2:51, "bill.peyton" > wrote: > --> > > > I have the Hartzell governor. You have to replace the arm if you are usi ng the throttle quadrant. If you do not, you will get about half the trave l on the quadrant, and half the leverage. Yes, it will work with the stock arm, but it looks unprofessional when used in conjunction with the quadran t. > I have not had any issues after 150 hours. > > -------- > Bill > WA0SYV > Aviation Partners, LLC > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=402560#402560 > > > > > > > > > > ----- No virus found in this message. Checked by AVG - www.avg.com ________________________________ Message 9 _____________________________________ Time: 03:34:08 PM PST US From: debra EVERETT Subject: RE: RV10-List: Re: Hartzell Governor with C2YR Prop Bill Where did you get the Hartzell governor replacement arm? I am using the sta ndard one from Hartzell with the throttle quadrand and it works well but yo u are right. It only has half the travel on the quadrant. Leon > Subject: RV10-List: Re: Hartzell Governor with C2YR Prop > From: peyton.b@sbcglobal.net > Date: Wed=2C 12 Jun 2013 10:23:08 -0700 > To: rv10-list@matronics.com > > > I have the Hartzell governor. You have to replace the arm if you are usin g the throttle quadrant. If you do not=2C you will get about half the trave l on the quadrant=2C and half the leverage. Yes=2C it will work with the st ock arm=2C but it looks unprofessional when used in conjunction with the qu adrant. > I have not had any issues after 150 hours. > > -------- > Bill > WA0SYV > Aviation Partners=2C LLC > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=402561#402561 > > > > > > > =========== =========== =========== =========== > > > ________________________________ Message 10 ____________________________________ Time: 03:45:53 PM PST US Subject: Re: RV10-List: Hartzell Governor From: Bob Leffler Direct from Hartzell. I can get the part number when I get home late tonight, but I know it's on Bill's mykitlog site, it's also on mark cooper's (charliewaffle), and I think I may have posted in on mykitlog site. Several places to find it in the mean time. It's a perfect fit if you already drilled the hole in the front baffle per the plans Sent from my iPhone On Jun 12, 2013, at 4:56 PM, Patrick Pulis wrote: Bill Where did you source the new governor arm from please, as I'm installing the quadrant? Do you have a part number? Warm regards Patrick Pulis Adelaide, South Australia #40299 On 13/06/2013, at 2:51, "bill.peyton" wrote: > > I have the Hartzell governor. You have to replace the arm if you are using the throttle quadrant. If you do not, you will get about half the travel on the quadrant, and half the leverage. Yes, it will work with the stock arm, but it looks unprofessional when used in conjunction with the quadrant. > I have not had any issues after 150 hours. > > -------- > Bill > WA0SYV > Aviation Partners, LLC > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=402560#402560 ________________________________ Message 11 ____________________________________ Time: 04:41:50 PM PST US Subject: RV10-List: Re: MT Propeller From: "mds4878" Thank you for your help I have the propeller spinner and governor ordered. -------- RV-10 #40447 Fuselage almost done. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=402579#402579 ________________________________ Message 12 ____________________________________ Time: 06:23:10 PM PST US Subject: RV10-List: Re: Hartzell Governor with C2YR Prop From: "bill.peyton" I called Hartzell, and $27 later I had the part. -------- Bill WA0SYV Aviation Partners, LLC Read this topic online here: http://forums.matronics.com/viewtopic.php?p=402582#402582 Attachments: http://forums.matronics.com//files/image_214.jpg ________________________________ Message 13 ____________________________________ Time: 06:43:16 PM PST US From: "Bob Leffler" Subject: RE: RV10-List: Re: Hartzell Governor with C2YR Prop Hartzell part number 103568 -----Original Message----- From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of bill.peyton Sent: Wednesday, June 12, 2013 9:23 PM Subject: RV10-List: Re: Hartzell Governor with C2YR Prop I called Hartzell, and $27 later I had the part. -------- Bill WA0SYV Aviation Partners, LLC Read this topic online here: http://forums.matronics.com/viewtopic.php?p=402582#402582 Attachments: http://forums.matronics.com//files/image_214.jpg ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message rv10-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/RV10-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/rv10-list Browse Digests http://www.matronics.com/digest/rv10-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.