----------------------------------------------------------
                           RV10-List Digest Archive
                                      ---
                     Total Messages Posted Mon 06/17/13: 3
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 05:19 AM - Re: Slickstart and electronic tachs  (Bill Watson)
     2. 06:57 AM - Fw: Re: Routing electrical conduit  (johngoodman)
     3. 07:59 AM - Re: How many turns to adjust low RPM on Silver Hawk EX injector  (Jesse Saint)
 
 
 
________________________________  Message 1  _____________________________________


Time: 05:19:41 AM PST US
From: Bill Watson <Mauledriver@nc.rr.com>
Subject: Re: RV10-List: Slickstart and electronic tachs


I went with the solution that puts a sensor into one of the two mags.  I 
forget the details.... and whether it operates when the mag is switched off.

Why?  Because I no longer look for a mag drop as a mag check. Rather, 
with a GRT EFIS and EIS I watch EGTs during the mag check. When one is 
switched off, all EGTs should rise.  If there is a problem with a plug 
or a cylinder, that EGT won't rise.


________________________________  Message 2  _____________________________________


Time: 06:57:28 AM PST US
Subject: RV10-List: Fwd: RE: Routing electrical conduit
From: "johngoodman" <johngoodman@earthlink.net>


Why is this a separate thread?

--------
#40572 Phase One complete and flying.


Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=402862#402862


________________________________  Message 3  _____________________________________


Time: 07:59:19 AM PST US
Subject: Re: RV10-List: How many turns to adjust low RPM on Silver Hawk EX injector
From: Jesse Saint <jesse@saintaviation.com>


Probably about half a turn, IIRC.

Jesse Saint
Saint Aviation, Inc.
jesse@saintaviation.com
C: 352-427-0285
F: 815-377-3694

On Jun 14, 2013, at 2:41 PM, Mike Whisky <rv-10@wellenzohn.net> wrote:

> 
> Hi,
> my idle RPM is too high 900 RPM, I need to adjust the throttle lever on the Silver
Hawk EX and wonder if someone knows how many turns on the adjustment nut
equal 100 RPM.
> 
> Thanks
> Mike
> 
> --------
> RV-10 builder (final system testing)
> #511
> 
> 
> 
> 
> Read this topic online here:
> 
> http://forums.matronics.com/viewtopic.php?p=402696#402696
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 


 

-------------------------------------------------------------------------------------
                       Other Matronics Email List Services
-------------------------------------------------------------------------------------
Post A New Message               rv10-list@matronics.com
UN/SUBSCRIBE                     http://www.matronics.com/subscription
List FAQ                         http://www.matronics.com/FAQ/RV10-List.htm
Web Forum Interface To Lists     http://forums.matronics.com
Matronics List Wiki              http://wiki.matronics.com
Full Archive Search Engine       http://www.matronics.com/search
7-Day List Browse                http://www.matronics.com/browse/rv10-list
Browse Digests                   http://www.matronics.com/digest/rv10-list
Browse Other Lists               http://www.matronics.com/browse
Live Online Chat!                http://www.matronics.com/chat
Archive Downloading              http://www.matronics.com/archives
Photo Share                      http://www.matronics.com/photoshare
Other Email Lists                http://www.matronics.com/emaillists
Contributions                    http://www.matronics.com/contribution
-------------------------------------------------------------------------------------

These Email List Services are sponsored solely by Matronics and through the 
generous Contributions of its members.