Today's Message Index:
----------------------
1. 04:40 AM - Re: Air seal fabric around prop governor (Rob Kermanj)
2. 05:23 AM - Re: Air seal fabric around prop governor (Tim Olson)
3. 09:55 AM - Re: Jetflex paint (dhmoose)
4. 10:10 AM - Re: Jetflex paint (Lenny Iszak)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Air seal fabric around prop governor |
Jeff, you need to do the best you can in sealing the area. I have
attached pictures of mine but it does not show how I did it that well.
Use combination of rubber seal and RTV.
The hole you see above the cowl ramp is in the high pressure area and
does not effect the seal.
Hopefully some has a better pictures/method for you.
Do not archive
On Oct 3, 2013, at 8:03 PM, Jeff Carpenter <jeff@westcottpress.com>
wrote:
<jeff@westcottpress.com>
>
> I'm having a hard time conceptualizing what happens at the interface
of the prop governor, the air ramp and the air seal fabric. It seams
like a big leaky hole to me. Does anyone have pictures... or wonderfully
descriptive words... of that area?
>
> Jeff Carpenter
> 40304
>
>
>
>
>
>
>
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Air seal fabric around prop governor |
One thing to keep in mind is that unless you seal an end of those ramps, the
air can leak under them to the outer end which is in the low pressure area.
So the hole above the governor may matter if you don't contain the air.
Tim
On Oct 4, 2013, at 6:39 AM, Rob Kermanj <flysrv10@gmail.com> wrote:
> Jeff, you need to do the best you can in sealing the area. I have attache
d pictures of mine but it does not show how I did it that well.
>
> Use combination of rubber seal and RTV.
>
> The hole you see above the cowl ramp is in the high pressure area and does
not effect the seal.
>
> Hopefully some has a better pictures/method for you.
>
> <IMG_2630.jpeg><IMG_2631.jpeg><IMG_2633.jpeg>
>
> Do not archive
>
>
> On Oct 3, 2013, at 8:03 PM, Jeff Carpenter <jeff@westcottpress.com> wrote:
>
>>
>> I'm having a hard time conceptualizing what happens at the interface of t
he prop governor, the air ramp and the air seal fabric. It seams like a big l
eaky hole to me. Does anyone have pictures... or wonderfully descriptive wor
ds... of that area?
>>
>> Jeff =======================
===============http://www.matronics.com/co==
==============
>
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Jetflex paint |
bob88 wrote:
> Can you advise re sourcing Jetflex paint?
I got mine from Advanced Aircraft Coatings in Oklahoma.
--------
David Halmos
RV-10
Electrical/avionics
Portland, OR
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=409850#409850
Message 4
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Jetflex paint |
I got it from Aviall.com
--------
Lenny
#40803
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=409852#409852
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|