RV10-List Digest Archive

Wed 11/13/13


Total Messages Posted: 5



Today's Message Index:
----------------------
 
     0. 12:14 AM - Please Make A List Contribution Today; Some Nice Comments...  (Matt Dralle)
     1. 08:05 AM - Oil/ Air Separator (Rich Hansen)
     2. 08:41 AM - Re: Please Make A List Contribution Today; Some Nice Comments...  (Mike)
     3. 02:50 PM - Re: RV-7 loss -> tail inspections -> spar cracks and loose jam nuts found (Dave Saylor)
     4. 06:41 PM - Door Struts, (Bruce Johnson)
 
 
 


Message 0


  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 12:14:51 AM PST US
    From: Matt Dralle <dralle@matronics.com>
    Subject: Please Make A List Contribution Today; Some Nice Comments...
    Dear Listers, I've been getting some very nice comments from Listers along with their List Support Contributions. I've shared a number of them below. Please read them over and see what your fellow Listers think of the Lists and Forums. Please make a Contribution today to support the continued upgrade and operation of these services. There are lots of really nice gifts available this year, so please browse the selections and pickup something fun with your qualifying Contribution! You may use a credit card or your PayPal account here: http://www.matronics.com/contribution Or feel free to send a personal check to: Matronics / Matt Dralle 581 Jeannie Way Livermore CA 94550 Thank you in advance for your generous support! It is very much appreciated! Best regards, Matt Dralle Matronics Email List Administrator -------------------- What Listers Are Saying About The Lists -------------------- I wondered off for a few years & am coming back. I firmly believe you provide greater value to us than some magazine subscriptions. William F Thanks for helping me connect to people have truly blazed the trail. Terry M Thank you for the time and effort you put into keeping these lists going. I am on the verge of flying my RV 8 and would not be here without the help of Matronics. Michael W Thank you for providing a valuable service. Vaughn T Matt I like your forums. Jerry D Thank you for another year of service. Oscar Z Been a "member" for years - this has been a fantastic resource and a great gift to the aviation community. Reade G Thanks for the many years of support to RV builders. Roy H Best run list on the net. Roger C Thanks for your excellent forum! Fred D Truly respect your work and service to many readers!! Fergus K Thanks for an ad-free list! William A Thank you for your GREAT service. I read it every day. John B ..great service! Ralph C Thanks so much for being there. Your contribution to aviation knowledge is invaluable. Benjamin B Thank you for providing the list service. It's great! William V I'd never have finished my Glasair without them. Ronald C Thank you Matt for the valuable forum, am pleased to contribute! Jeffrey J Fine service. Byron G Thanks for your support of our community! Kenneth B -------------------- What Listers Are Saying About The Lists --------------------


    Message 1


  • INDEX
  • Back to Main INDEX
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 08:05:46 AM PST US
    From: Rich Hansen <karolamy@roadrunner.com>
    Subject: Oil/ Air Separator
    Thank you Greg, That is exactly the info/pirep I was looking for. I appreciate your input! Rich Sent from my iPhone > On Nov 13, 2013, at 12:02 AM, RV10-List Digest Server <rv10-list@matronics.com> wrote: > > * > > ================================================= > Online Versions of Today's List Digest Archive > ================================================= > > Today's complete RV10-List Digest can also be found in either of the > two Web Links listed below. The .html file includes the Digest formatted > in HTML for viewing with a web browser and features Hyperlinked Indexes > and Message Navigation. The .txt file includes the plain ASCII version > of the RV10-List Digest and can be viewed with a generic text editor > such as Notepad or with a web browser. > > HTML Version: > > http://www.matronics.com/digest/digestview.php?Style=82701&View=html&Chapter 13-11-12&Archive=RV10 > > Text Version: > > http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&Chapter 13-11-12&Archive=RV10 > > > =============================================== > EMail Version of Today's List Digest Archive > =============================================== > > > ---------------------------------------------------------- > RV10-List Digest Archive > --- > Total Messages Posted Tue 11/12/13: 1 > ---------------------------------------------------------- > > > Today's Message Index: > ---------------------- > > 1. 09:03 AM - Re: Oil/Air Separator (greghale) > > > > ________________________________ Message 1 _____________________________________ > > > Time: 09:03:42 AM PST US > Subject: RV10-List: Re: Oil/Air Separator > From: "greghale" <ghale5224@aol.com> > > > Rich, > I am using the Andair air/oil separator with the condensation trap. The unit works > as advertised. With the old separator I originally used, I always had an > oil stream on the bottom of the aircraft after flying. The Andair separator eliminates > the need to wipe the bottom of the airplane after each flight. > I used a hose reducer fitting to hook a 1" hose to a 3/4" hose. > > > > > >


    Message 2


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 08:41:42 AM PST US
    Subject: Re: Please Make A List Contribution Today; Some Nice Comments...
    From: Mike <mb86967@aol.com>
    Please take me off the list Sent from my iPhone > On Nov 13, 2013, at 3:12 AM, Matt Dralle <dralle@matronics.com> wrote: > > > > Dear Listers, > > I've been getting some very nice comments from Listers along with their List Support Contributions. I've shared a number of them below. Please read them over and see what your fellow Listers think of the Lists and Forums. > > Please make a Contribution today to support the continued upgrade and operation of these services. > > There are lots of really nice gifts available this year, so please browse the selections and pickup something fun with your qualifying Contribution! > > You may use a credit card or your PayPal account here: > > http://www.matronics.com/contribution > > Or feel free to send a personal check to: > > Matronics / Matt Dralle > 581 Jeannie Way > Livermore CA 94550 > > Thank you in advance for your generous support! It is very much appreciated! > > Best regards, > > Matt Dralle > Matronics Email List Administrator > > > > -------------------- What Listers Are Saying About The Lists -------------------- > > I wondered off for a few years & am coming back. I firmly > believe you provide greater value to us than some > magazine subscriptions. > William F > > Thanks for helping me connect to people have truly blazed > the trail. > Terry M > > Thank you for the time and effort you put into keeping these > lists going. I am on the verge of flying my RV 8 and would > not be here without the help of Matronics. > Michael W > > Thank you for providing a valuable service. > Vaughn T > > Matt I like your forums. > Jerry D > > Thank you for another year of service. > Oscar Z > > Been a "member" for years - this has been a fantastic > resource and a great gift to the aviation community. > Reade G > > Thanks for the many years of support to RV builders. > Roy H > > Best run list on the net. > Roger C > > Thanks for your excellent forum! > Fred D > > Truly respect your work and service to many readers!! > Fergus K > > Thanks for an ad-free list! > William A > > Thank you for your GREAT service. I read it every day. > John B > > ..great service! > Ralph C > > Thanks so much for being there. Your contribution to aviation > knowledge is invaluable. > Benjamin B > > Thank you for providing the list service. It's great! > William V > > I'd never have finished my Glasair without them. > Ronald C > > Thank you Matt for the valuable forum, am pleased to > contribute! > Jeffrey J > > Fine service. > Byron G > > Thanks for your support of our community! > Kenneth B > > > -------------------- What Listers Are Saying About The Lists -------------------- > > > > > > > >


    Message 3


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 02:50:01 PM PST US
    From: Dave Saylor <dave.saylor.aircrafters@gmail.com>
    Subject: Re: RV-7 loss -> tail inspections -> spar cracks and loose
    jam nuts found Tim, I've had a reminder about this on my desk for a few weeks now. I finally got around to checking my rudder and found the center hinge jam nut loose. All the others, rudder and elevator, were tight. I'll pay closer attention on preflight now. Thanks for the heads up. Dave Saylor 831-750-0284 CL On Sun, Oct 6, 2013 at 7:30 AM, Tim Lewis <TimRVator@comcast.net> wrote: > > A thread at VAF discusses the results of empenage inspections after the > recent loss of an RV-7. (http://www.vansairforce.com/ > community/showthread.php?t=104551) A couple of spar cracks were found, > as were several instances of loose jam nuts on rudder/elevator rod end > bearings. > > Those rod end bearings form the hinge pivot for our elevators and rudders. > My understanding: If the jam nut is tight, the spar is held in > compression between the rod end bearing's plate nut and jam nut. If the > jam nut comes loose, the loads from the rod end bearing transfer to the > rudder/elevator spar only through the rivets holding the platenuts to the > spar. Not so good. > > Prompted by this thread, I inspected my RV-10 tail structure. No spar > cracks found. But I found that the top rudder rod end bearing jam nut > (page 11-7, similar to plans page 11-2) was loose. The torque seal on > this nut was (obviously) broken. > > Tim > > -- Tim Lewis -- HEF (Manassas, VA) > RV-6A N47TD -- 1104 hrs - sold > RV-10 N31TD -- 400 hrs > >


    Message 4


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 06:41:59 PM PST US
    From: Bruce Johnson <bruce1hwjohnson@yahoo.com>
    Subject: Door Struts,
    Where have we been getting replacement door struts?=0A-=0AGod Bless Ameri ca=0A(please) -:)=0A=0A=0ABruce




    Other Matronics Email List Services

  • Post A New Message
  •   rv10-list@matronics.com
  • UN/SUBSCRIBE
  •   http://www.matronics.com/subscription
  • List FAQ
  •   http://www.matronics.com/FAQ/RV10-List.htm
  • Web Forum Interface To Lists
  •   http://forums.matronics.com
  • Matronics List Wiki
  •   http://wiki.matronics.com
  • 7-Day List Browse
  •   http://www.matronics.com/browse/rv10-list
  • Browse RV10-List Digests
  •   http://www.matronics.com/digest/rv10-list
  • Browse Other Lists
  •   http://www.matronics.com/browse
  • Live Online Chat!
  •   http://www.matronics.com/chat
  • Archive Downloading
  •   http://www.matronics.com/archives
  • Photo Share
  •   http://www.matronics.com/photoshare
  • Other Email Lists
  •   http://www.matronics.com/emaillists
  • Contributions
  •   http://www.matronics.com/contribution

    These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.

    -- Please support this service by making your Contribution today! --