---------------------------------------------------------- RV10-List Digest Archive --- Total Messages Posted Tue 04/08/14: 10 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 04:56 AM - Re: For Sale: SL30 tray (Neal George) 2. 09:42 AM - VP-200 Noise on Softkey Push (Sean Stephens) 3. 09:57 AM - Re: VP-200 Noise on Softkey Push (Pascal) 4. 10:14 AM - Re: VP-200 Noise on Softkey Push (Jesse Saint) 5. 11:16 AM - Re: VP-200 Noise on Softkey Push (Matt Dralle) 6. 11:38 AM - Re: VP-200 Noise on Softkey Push (Sean Stephens) 7. 11:50 AM - Re: VP-200 Noise on Softkey Push (David Maib) 8. 01:49 PM - Same here (Mike Whisky) 9. 03:42 PM - Slime Fighter oil separator (woxofswa) 10. 05:42 PM - Re: Slime Fighter oil separator (Linn Walters) ________________________________ Message 1 _____________________________________ Time: 04:56:36 AM PST US From: Neal George Subject: Re: RV10-List: For Sale: SL30 tray Alan - According to the install manuals, I believe they use the same tray, but the SL30 takes an extra connector Neal George Sent from my iPhone > On Apr 6, 2014, at 8:58 PM, "Alan Mekler MD" wrote: > > > Neal, > Thinking of replacing my sl40 with a 30 > will the 30 fit in the 40 space? > Alan >> On Apr 6, 2014, at 12:41 PM, Neal George wrote: >> >> >> Tray for SL30 & connectors. >> Previously installed, excellent condition. >> >> $150 shipped CONUS >> >> Neal George >> Sent from my iPhone > > > > > ________________________________ Message 2 _____________________________________ Time: 09:42:05 AM PST US From: Sean Stephens Subject: RV10-List: VP-200 Noise on Softkey Push For those with the VP-200 in their bird... I am getting a small burst of static over the intercom when I press one of the four soft keys on the display. I do NOT get the same static when I press the far right knob. All audio tones generated by the VP-200 are coming across fine and I have no other devices causing static. Has anyone else come across this? -Sean #40303 ________________________________ Message 3 _____________________________________ Time: 09:57:23 AM PST US From: "Pascal" Subject: Re: RV10-List: VP-200 Noise on Softkey Push No static from the VP when pressing buttons. It has started to not always move to the next mode of flight (when it should), with no changes from me however. May be a call to Chad @ VP is in order. Pascal -----Original Message----- From: Sean Stephens Sent: Tuesday, April 08, 2014 9:34 AM Subject: RV10-List: VP-200 Noise on Softkey Push For those with the VP-200 in their bird... I am getting a small burst of static over the intercom when I press one of the four soft keys on the display. I do NOT get the same static when I press the far right knob. All audio tones generated by the VP-200 are coming across fine and I have no other devices causing static. Has anyone else come across this? -Sean #40303 ________________________________ Message 4 _____________________________________ Time: 10:14:57 AM PST US Subject: Re: RV10-List: VP-200 Noise on Softkey Push From: Jesse Saint I think I remember seeing that in the early days. They came out with a little chip that went inline with the audio circuit, if I'm not mistaken, that helped or took care of that. I'd call VP. Jesse Saint Saint Aviation, Inc. jesse@saintaviation.com C: 352-427-0285 F: 815-377-3694 On Apr 8, 2014, at 12:34 PM, Sean Stephens wrote: > > For those with the VP-200 in their bird... > > I am getting a small burst of static over the intercom when I press one of the four soft keys on the display. I do NOT get the same static when I press the far right knob. > > All audio tones generated by the VP-200 are coming across fine and I have no other devices causing static. > > Has anyone else come across this? > > -Sean #40303 > > > > ________________________________ Message 5 _____________________________________ Time: 11:16:28 AM PST US From: Matt Dralle Subject: Re: RV10-List: VP-200 Noise on Softkey Push At 09:34 AM 4/8/2014 Tuesday, you wrote: > >For those with the VP-200 in their bird... > >I am getting a small burst of static over the intercom when I press one of the four soft keys on the display. I do NOT get the same static when I press the far right knob. > >All audio tones generated by the VP-200 are coming across fine and I have no other devices causing static. > >Has anyone else come across this? > >-Sean #40303 My VP-200's make a "kkrrsssh" sound whenever I press any of the 5 chicklette buttons. That's by design. I told Marc it should be a "click", but he preferred "kkrrssh". Whatevs... :-) Matt - Matt Dralle RV-8 #82880 N998RV "Ruby Vixen" http://www.mattsrv8.com - Matt's Complete RV-8 Construction Log http://www.mattsrv8.com/Mishap - Landing Mishap Rebuild Log http://www.youtube.com/MattsRV8 - Matt's RV-8 HDTV YouTube Channel Status: 172+ Hours TTSN - Rebuilding Fuselage After Landing Mishap... RV-6 #20916 N360EM "The Flyer" http://www.mattsrv6.com - Matt's RV-6 Revitalization Log Status: 180+ Hours Since Purchase - Upgrades Complete; Now In Full Flyer Mode Matt's Livermore Airport Live ATC Stream! Check out the live ATC stream directly from my hangar at the Livermore Airport. Includes both Tower and Ground transmissions. Archives too! For entertainment purposes only. http://klvk.matronics.com ________________________________ Message 6 _____________________________________ Time: 11:38:17 AM PST US From: Sean Stephens Subject: Re: RV10-List: VP-200 Noise on Softkey Push I had a feeling that it might be intended. The "kkrrssh" sure sounds like a static "pop", which lead me to believe I messed up the audio wiring somehow. I wonder if that sound is just a sound file somewhere on the system and it could be replaced? -Sean > Matt Dralle > April 8, 2014 at 1:15 PM > > > My VP-200's make a "kkrrsssh" sound whenever I press any of the 5 > chicklette buttons. That's by design. I told Marc it should be a > "click", but he preferred "kkrrssh". Whatevs... :-) > > Matt > > > - > Matt Dralle > > RV-8 #82880 N998RV "Ruby Vixen" > http://www.mattsrv8.com - Matt's Complete RV-8 Construction Log > http://www.mattsrv8.com/Mishap - Landing Mishap Rebuild Log > http://www.youtube.com/MattsRV8 - Matt's RV-8 HDTV YouTube Channel > Status: 172+ Hours TTSN - Rebuilding Fuselage After Landing Mishap... > > RV-6 #20916 N360EM "The Flyer" > http://www.mattsrv6.com - Matt's RV-6 Revitalization Log > Status: 180+ Hours Since Purchase - Upgrades Complete; Now In Full > Flyer Mode > > Matt's Livermore Airport Live ATC Stream! > Check out the live ATC stream directly from my hangar at the Livermore > Airport. Includes both Tower and Ground transmissions. Archives too! > For entertainment purposes only. http://klvk.matronics.com > > ________________________________ Message 7 _____________________________________ Time: 11:50:27 AM PST US Subject: Re: RV10-List: VP-200 Noise on Softkey Push From: David Maib Mine has always done that. Sent from my iPhone > On Apr 8, 2014, at 11:34 AM, Sean Stephens wrote: > > > For those with the VP-200 in their bird... > > I am getting a small burst of static over the intercom when I press one of the four soft keys on the display. I do NOT get the same static when I press the far right knob. > > All audio tones generated by the VP-200 are coming across fine and I have no other devices causing static. > > Has anyone else come across this? > > -Sean #40303 > > > > ________________________________ Message 8 _____________________________________ Time: 01:49:02 PM PST US Subject: RV10-List: Same here From: "Mike Whisky" That's by design it does it on all buttons. Mike -------- RV-10 builder (flying, test phase) #511 Read this topic online here: http://forums.matronics.com/viewtopic.php?p=421798#421798 ________________________________ Message 9 _____________________________________ Time: 03:42:29 PM PST US Subject: RV10-List: Slime Fighter oil separator From: "woxofswa" Any PIREPS on the Slime Fighter RV-10 product and/or vs the ASA product or any other product? Just getting painted and would like to keep it clean. Thanks in advance. Getting close to engine start! -------- Myron Nelson Mesa, AZ Emp completed, QB wings completed, legacy build fuse on gear. FWF complete. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=421803#421803 ________________________________ Message 10 ____________________________________ Time: 05:42:31 PM PST US From: Linn Walters Subject: Re: RV10-List: Slime Fighter oil separator I'm opinionated so you may take this with a grain of salt .... whatever that means ;-) Air/oil separators are great for covering up a problem .... if you're getting that much blowby then it's time to look at fixing the problem. With a new engine you shouldn't need one to keep the belly clean. If you're really anal about it, shorten up the vent tube and fix a can under it to catch the drips. If you do go the air/oil separator ..... drain the 'gunk' into a can too. Linn On 4/8/2014 6:41 PM, woxofswa wrote: > > Any PIREPS on the Slime Fighter RV-10 product and/or vs the ASA product or any other product? Just getting painted and would like to keep it clean. > > Thanks in advance. Getting close to engine start! > > -------- > Myron Nelson > Mesa, AZ > Emp completed, QB wings completed, legacy build fuse on gear. FWF complete. > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=421803#421803 > > > ----- > No virus found in this message. > Checked by AVG - www.avg.com > > ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message rv10-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/RV10-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/rv10-list Browse Digests http://www.matronics.com/digest/rv10-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.