---------------------------------------------------------- RV10-List Digest Archive --- Total Messages Posted Sat 12/20/14: 5 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 06:35 AM - Re: Time for front seats (Terry Moushon) 2. 06:53 AM - Re: Re: Time for front seats (Craig Rufi) 3. 09:15 AM - Holes in the Landing Gear Mounts (Carlos Trigo) 4. 12:38 PM - Re: Holes in the Landing Gear Mounts (Rocketman1988) 5. 12:56 PM - Re: Re: Holes in the Landing Gear Mounts (Linn Walters) ________________________________ Message 1 _____________________________________ Time: 06:35:06 AM PST US Subject: RV10-List: Re: Time for front seats From: Terry Moushon I met Geoff and Zac a couple years ago at OSH13 and I saw their products up close at OSH14. I flew to Lancaster to visit Geoffs' facility (worth the time) and drop off my front seats and rear seat backs a couple months ago.... Yesterday, I received the rest of my RV10 order. WOW! The workmanship was AWESOME. I think their abilities come from the years of doing new model interior design work for the automotive industry. I have heard of several good seat makers....but I think Geoffs' interior design background, his successful completion of his RV10 and Zac push them to the top. ________________________________ Message 2 _____________________________________ Time: 06:53:34 AM PST US Subject: Re: RV10-List: Re: Time for front seats From: Craig Rufi I am also close to interior. That's for posting.. I'll use him also. Craig On Sat, Dec 20, 2014 at 6:32 AM, Terry Moushon wrote: > > > I met Geoff and Zac a couple years ago at OSH13 and I saw their products > up close at OSH14. I flew to Lancaster to visit Geoffs' facility (worth > the time) and drop off my front seats and rear seat backs a couple months > ago.... Yesterday, I received the rest of my RV10 order. WOW! The > workmanship was AWESOME. I think their abilities come from the years of > doing new model interior design work for the automotive industry. I have > heard of several good seat makers....but I think Geoffs' interior design > background, his successful completion of his RV10 and Zac push them to the > top. > > ________________________________ Message 3 _____________________________________ Time: 09:15:50 AM PST US From: "Carlos Trigo" Subject: RV10-List: Holes in the Landing Gear Mounts Guys The WD-102- L & R Landing Gear Mounts have, each of them, 4 holes in the horizontal part, the ones which must be final-drilled #12 according to step 4 (on figure 4) of page 28-16 of the Manual (Section 28 : Fwd Ribs, Bhds & Bottom Skins), which doesn't seem to be used for anything. Does anybody know what are these 4 holes for? I ask because I didn't find the answer in the Manual, though I'm tempted to use those holes to install an electric connector bus for the bunch of wires which come from the Stick grip . Regards Carlos --- Este email est=C3=A1 livre de v=C3=ADrus e malware porque a prote=C3=A7=C3 =A3o avast! Antivirus est=C3=A1 ativa. http://www.avast.com ________________________________ Message 4 _____________________________________ Time: 12:38:43 PM PST US Subject: RV10-List: Re: Holes in the Landing Gear Mounts From: "Rocketman1988" Those holes are for the Mid Seat Rail Supports that you assembled in step 1 and 2. There are also several threads that identify the fact that the plans do not tell you when to install these supports, only that they should be left out in order to drill and ream the gear leg mounting hole... Read this topic online here: http://forums.matronics.com/viewtopic.php?p=435945#435945 ________________________________ Message 5 _____________________________________ Time: 12:56:38 PM PST US From: Linn Walters Subject: Re: RV10-List: Re: Holes in the Landing Gear Mounts I got so frustrated trying to use the 4 bolts/nuts to attach those 'spacers' that I created a plate with three nutplates to go on one side of the web (that you can't see) ..... and the bolt/nut to go on the other side of the web. Because I could. Linn On 12/20/2014 3:35 PM, Rocketman1988 wrote: > > Those holes are for the Mid Seat Rail Supports that you assembled in step 1 and 2. > > There are also several threads that identify the fact that the plans do not tell you when to install these supports, only that they should be left out in order to drill and ream the gear leg mounting hole... > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=435945#435945 > > > ----- > No virus found in this message. > Checked by AVG - www.avg.com > > ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message rv10-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/RV10-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/rv10-list Browse Digests http://www.matronics.com/digest/rv10-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.