----------------------------------------------------------
                           RV10-List Digest Archive
                                      ---
                     Total Messages Posted Wed 12/31/14: 3
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 02:00 PM - propellor governor  (bob88)
     2. 02:24 PM - Re: propellor governor  (Rick Lark)
     3. 04:59 PM - PlaneAround 180 Degree Centre Latch Installation Instructions  (Patrick Pulis)
 
 
 
________________________________  Message 1  _____________________________________


Time: 02:00:19 PM PST US
Subject: RV10-List: propellor governor
From: "bob88" <marty.crooks@comcast.net>


I have a new governor from Vans (but not a Vans supplied engine). The model is
MT P-860-3. The spec sheet says it is for a Lyc IO 360 but I thought I got it
for the IO 540...is the governor OK for either engine?


Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=436467#436467


________________________________  Message 2  _____________________________________


Time: 02:24:01 PM PST US
Subject: Re: RV10-List: propellor governor
From: Rick Lark <larkrv10@gmail.com>

Bob that's what they sent me for my IO 540.  I just rotated the control arm
on mine for proper alignment with the prop cable.  If you're interested,
search "MT P-860-3 Governor rotation" on VAF.
Rick
#40956
Southampton, Ont

On Wed, Dec 31, 2014 at 4:56 PM, bob88 <marty.crooks@comcast.net> wrote:

>
> I have a new governor from Vans (but not a Vans supplied engine). The
> model is MT P-860-3. The spec sheet says it is for a Lyc IO 360 but I
> thought I got it for the IO 540...is the governor OK for either engine?
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=436467#436467
>
>

________________________________  Message 3  _____________________________________


Time: 04:59:28 PM PST US
Subject: RV10-List: PlaneAround 180 Degree Centre Latch Installation Instructions
From: Patrick Pulis <rv10free2fly@yahoo.com.au>

Happy New Year to all my RV-10 colleagues, may you all have a safe flying ye
ar.

Could anyone please send me a link or a copy of the installation instruction
s for the Plane Around 180 degree centre latch for the RV-10 doors.  I just c
an seem to find them!

Many thanks in anticipation.

Warm regards and thanks

Patrick Pulis
Adelaide, South Australia

> On 1 Jan 2015, at 08:50, Rick Lark <larkrv10@gmail.com> wrote:
> 
> Bob that's what they sent me for my IO 540.  I just rotated the control ar
m on mine for proper alignment with the prop cable.  If you're interested, s
earch "MT P-860-3 Governor rotation" on VAF.
> Rick
> #40956
> Southampton, Ont
> 
>> On Wed, Dec 31, 2014 at 4:56 PM, bob88 <marty.crooks@comcast.net> wrote:
>> 
>> I have a new governor from Vans (but not a Vans supplied engine). The mod
el is MT P-860-3. The spec sheet says it is for a Lyc IO 360 but I thought I
 got it for the IO 540...is the governor OK for either engine?
>> 
>> 
>> 
>> 
>> Read this topic online here:
>> 
>> http://forums.matronics.com/viewtopic.php?p=436467#436467
>> 
>> 
>> 
>> 
>> 
>> 
>> 
>> ==========
>> br> fts!)
>> r> > com" target="_blank">www.aeroelectric.com
>> w.buildersbooks.com" target="_blank">www.buildersbooks.com
>> p.com" target="_blank">www.homebuilthelp.com
>> e.com" target="_blank">www.mypilotstore.com
>> " target="_blank">www.mrrace.com
>> target="_blank">http://www.matronics.com/contribution
>>           -Matt Dralle, List Admin.
>> ==========
>> -List" target="_blank">http://www.matronics.com/Navigator?RV10-List
>> ==========
>> FORUMS -
>> _blank">http://forums.matronics.com
>> ==========
>> 
>> 
>> 
> 
> 
> 
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
> 

 

-------------------------------------------------------------------------------------
                       Other Matronics Email List Services
-------------------------------------------------------------------------------------
Post A New Message               rv10-list@matronics.com
UN/SUBSCRIBE                     http://www.matronics.com/subscription
List FAQ                         http://www.matronics.com/FAQ/RV10-List.htm
Web Forum Interface To Lists     http://forums.matronics.com
Matronics List Wiki              http://wiki.matronics.com
Full Archive Search Engine       http://www.matronics.com/search
7-Day List Browse                http://www.matronics.com/browse/rv10-list
Browse Digests                   http://www.matronics.com/digest/rv10-list
Browse Other Lists               http://www.matronics.com/browse
Live Online Chat!                http://www.matronics.com/chat
Archive Downloading              http://www.matronics.com/archives
Photo Share                      http://www.matronics.com/photoshare
Other Email Lists                http://www.matronics.com/emaillists
Contributions                    http://www.matronics.com/contribution
-------------------------------------------------------------------------------------

These Email List Services are sponsored solely by Matronics and through the 
generous Contributions of its members.