---------------------------------------------------------- RV10-List Digest Archive --- Total Messages Posted Tue 06/09/15: 12 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 07:44 AM - reminder of window options other than Vans (Pascal) 2. 08:11 AM - Re: reminder of window options other than Vans (Danny Riggs) 3. 08:15 AM - Re: reminder of window options other than Vans (Ed Kranz) 4. 08:59 AM - Re: reminder of window options other than Vans (Shannon Hicks) 5. 09:20 AM - Re: reminder of window options other than Vans (Danny Riggs) 6. 09:43 AM - Re: reminder of window options other than Vans (Bob Leffler) 7. 09:54 AM - Re: reminder of window options other than Vans (Shannon Hicks) 8. 01:56 PM - Registration form 8050-1 (Jeff Carpenter) 9. 02:10 PM - Re: Registration form 8050-1 (Ed Kranz) 10. 02:31 PM - Re: Registration form 8050-1 (Justin Jones) 11. 10:21 PM - Re: Registration form 8050-1 (Ed Kranz) 12. 10:33 PM - Re: Registration form 8050-1 (Justin Jones) ________________________________ Message 1 _____________________________________ Time: 07:44:42 AM PST US From: "Pascal" Subject: RV10-List: reminder of window options other than Vans This weekend I was reminded that many may have forgotten that there is the option to get better quality parts from http://www.vansaircrafttires.com/categories/RV%252d10/ (Desser Tires) than what is in the kits. I was involved with the front windscreen fitting, when my Vans bought one was warped in the bottom corner. They come pretty close to be ready to install without major surgery. The side windows, I hear, fit right in =9Cas is=9D. Also Desser is where Vans gets the tires in the kits. If I were doing all this again I would just order the tire package- http://www.vansaircrafttires.com/rv-10-main-tire-package-special-save-10- two-15-600-6pr-retreads-two-aero-classic-easy-flate-tubes/?page_context= category&faceted_search=0. Better tires, tubes and the same price. I have seen first hand the attention to detail Desser strives for. I gain nothing from this other than knowing that I have told new builders that there are great options, for the same, maybe less, than getting what is in the kits. If you havent bought the windows and windscreen, I guarantee you will not regret going this route, less cutting, shaping and better glass in general. Pascal ________________________________ Message 2 _____________________________________ Time: 08:11:30 AM PST US From: Danny Riggs Subject: RE: RV10-List: reminder of window options other than Vans I can concur about Desser. Good products. Dan From: rv10flyer@live.com Subject: RV10-List: reminder of window options other than Vans =0A =0A =0A =0A This weekend I was reminded that many may have forgotten that there is the =0A option to get better quality parts from http://www.vansaircrafttires.com/ca tegories/RV%252d10/ =0A (Desser Tires) than what is in the kits.=0A =0A I was involved with the front windscreen fitting=2C when my Vans bought one =0A was warped in the bottom corner. They come pretty close to be ready to inst all =0A without major surgery. The side windows=2C I hear=2C fit right in =93as is =94. Also =0A Desser is where Vans gets the tires in the kits. If I were doing all this a gain =0A I would just order the tire package- http://www.vansaircrafttires.com/rv-10 -main-tire-package-special-save-10-two-15-600-6pr-retreads-two-aero-classic -easy-flate-tubes/?page_context=category&faceted_search=0. =0A Better tires=2C tubes and the same price.=0A =0A I have seen first hand the attention to detail Desser strives for. I gain =0A nothing from this other than knowing that I have told new builders that the re =0A are great options=2C for the same=2C maybe less=2C than getting what is in the =0A kits.=0A =0A If you havent bought the windows and windscreen=2C I guarantee you will not =0A regret going this route=2C less cutting=2C shaping and better glass in =0A general.=0A =0A Pascal =0A =0A =0A =0A =0A ============0A ============0A ============0A ============0A =0A ________________________________ Message 3 _____________________________________ Time: 08:15:17 AM PST US Subject: Re: RV10-List: reminder of window options other than Vans From: Ed Kranz I have all the Cee Baileys (Desser) windows in my plane. There was no major cutting required to install, but there was a bit of belt sander trimming on all of the windows to get a perfect fit. From what I've read of the Van's windows, it was quite a bit less work, but none of them just "popped right in". I am very happy with the end results though. On Tue, Jun 9, 2015 at 9:40 AM, Pascal wrote: > This weekend I was reminded that many may have forgotten that there is > the option to get better quality parts from > http://www.vansaircrafttires.com/categories/RV%252d10/ (Desser Tires) > than what is in the kits. > > I was involved with the front windscreen fitting, when my Vans bought one > was warped in the bottom corner. They come pretty close to be ready to > install without major surgery. The side windows, I hear, fit right in =9Cas > is=9D. Also Desser is where Vans gets the tires in the kits. If I w ere doing > all this again I would just order the tire package- > http://www.vansaircrafttires.com/rv-10-main-tire-package-special-save-10- two-15-600-6pr-retreads-two-aero-classic-easy-flate-tubes/?page_context=c ategory&faceted_search=0. > Better tires, tubes and the same price. > > I have seen first hand the attention to detail Desser strives for. I gain > nothing from this other than knowing that I have told new builders that > there are great options, for the same, maybe less, than getting what is i n > the kits. > > If you havent bought the windows and windscreen, I guarantee you will not > regret going this route, less cutting, shaping and better glass in genera l. > > Pascal > > * > =========== onics.com/Navigator?RV10-List> =========== =========== om/contribution> =========== > > * > > ________________________________ Message 4 _____________________________________ Time: 08:59:55 AM PST US Subject: Re: RV10-List: reminder of window options other than Vans From: Shannon Hicks As someone who just installed the rear windows, they were a major PIA. I don't know if they were easier than Van's but I had real issues getting them installed. The curve on the plexi did not match the curve of the cabin top and required a lot of force to keep them flush. I ended up having to use ratchet straps and gorilla tape to keep them somewhat in place. Even with all of that, they ended up somewhat proud on some of the edges. I have dry fit the windshield and have a 1/2" gap between the cabin top vertical flange as well as a gap between the upper fuselage and the plex in several places. None of these items are insurmountable, but they have definitely required much more work to get them to fit than I had thought. Shannon Hicks On Tue, Jun 9, 2015 at 10:12 AM, Ed Kranz wrote: > I have all the Cee Baileys (Desser) windows in my plane. There was no > major cutting required to install, but there was a bit of belt sander > trimming on all of the windows to get a perfect fit. From what I've read of > the Van's windows, it was quite a bit less work, but none of them just > "popped right in". I am very happy with the end results though. > > On Tue, Jun 9, 2015 at 9:40 AM, Pascal wrote: > >> This weekend I was reminded that many may have forgotten that there is >> the option to get better quality parts from >> http://www.vansaircrafttires.com/categories/RV%252d10/ (Desser Tires) >> than what is in the kits. >> >> I was involved with the front windscreen fitting, when my Vans bought on e >> was warped in the bottom corner. They come pretty close to be ready to >> install without major surgery. The side windows, I hear, fit right in =9Cas >> is=9D. Also Desser is where Vans gets the tires in the kits. If I were doing >> all this again I would just order the tire package- >> http://www.vansaircrafttires.com/rv-10-main-tire-package-special-save-10 -two-15-600-6pr-retreads-two-aero-classic-easy-flate-tubes/?page_context= category&faceted_search=0. >> Better tires, tubes and the same price. >> >> I have seen first hand the attention to detail Desser strives for. I gai n >> nothing from this other than knowing that I have told new builders that >> there are great options, for the same, maybe less, than getting what is in >> the kits. >> >> If you havent bought the windows and windscreen, I guarantee you will no t >> regret going this route, less cutting, shaping and better glass in gener al. >> >> Pascal >> >> * >> >> get="_blank">http://www.matronics.com/Navigator?RV10-List >> tp://forums.matronics.com >> _blank">http://www.matronics.com/contribution >> >> * >> >> > * > =========== onics.com/Navigator?RV10-List> =========== =========== om/contribution> =========== > > * > > ________________________________ Message 5 _____________________________________ Time: 09:20:42 AM PST US From: Danny Riggs Subject: RE: RV10-List: reminder of window options other than Vans I ended up using small holes in the glass and put clecos to hold. They got filled in of course during the final finishing. Subject: Re: RV10-List: reminder of window options other than Vans From: civeng123@gmail.com As someone who just installed the rear windows=2C they were a major PIA. I don't know if they were easier than Van's but I had real issues getting th em installed. The curve on the plexi did not match the curve of the cabin t op and required a lot of force to keep them flush. I ended up having to us e ratchet straps and gorilla tape to keep them somewhat in place. Even wit h all of that=2C they ended up somewhat proud on some of the edges. I have dry fit the windshield and have a 1/2" gap between the cabin top ver tical flange as well as a gap between the upper fuselage and the plex in se veral places. None of these items are insurmountable=2C but they have definitely required much more work to get them to fit than I had thought. Shannon Hicks On Tue=2C Jun 9=2C 2015 at 10:12 AM=2C Ed Kranz wrote: I have all the Cee Baileys (Desser) windows in my plane. There was no major cutting required to install=2C but there was a bit of belt sander trimming on all of the windows to get a perfect fit. From what I've read of the Van 's windows=2C it was quite a bit less work=2C but none of them just "popped right in". I am very happy with the end results though. On Tue=2C Jun 9=2C 2015 at 9:40 AM=2C Pascal wrote: =0A =0A =0A =0A This weekend I was reminded that many may have forgotten that there is the =0A option to get better quality parts from http://www.vansaircrafttires.com/ca tegories/RV%252d10/ =0A (Desser Tires) than what is in the kits.=0A =0A I was involved with the front windscreen fitting=2C when my Vans bought one =0A was warped in the bottom corner. They come pretty close to be ready to inst all =0A without major surgery. The side windows=2C I hear=2C fit right in =93as is =94. Also =0A Desser is where Vans gets the tires in the kits. If I were doing all this a gain =0A I would just order the tire package- http://www.vansaircrafttires.com/rv-10 -main-tire-package-special-save-10-two-15-600-6pr-retreads-two-aero-classic -easy-flate-tubes/?page_context=category&faceted_search=0. =0A Better tires=2C tubes and the same price.=0A =0A I have seen first hand the attention to detail Desser strives for. I gain =0A nothing from this other than knowing that I have told new builders that the re =0A are great options=2C for the same=2C maybe less=2C than getting what is in the =0A kits.=0A =0A If you havent bought the windows and windscreen=2C I guarantee you will not =0A regret going this route=2C less cutting=2C shaping and better glass in =0A general.=0A =0A Pascal =0A =0A =0A =0A =0A get="_blank">http://www.matronics.com/Navigator?RV10-List=0A tp://forums.matronics.com=0A _blank">http://www.matronics.com/contribution=0A =0A =0A =0A =0A =0A get="_blank">http://www.matronics.com/Navigator?RV10-List=0A tp://forums.matronics.com=0A _blank">http://www.matronics.com/contribution=0A =0A =0A =0A =0A =0A ============0A ============0A ============0A ============0A =0A ________________________________ Message 6 _____________________________________ Time: 09:43:32 AM PST US From: Bob Leffler Subject: Re: RV10-List: reminder of window options other than Vans There is usually a flat spot on the door frame that needs to be built up to f ollow the natural arc of the window and door. I fabricated "finger" out of aluminum strips and cleco'd them to the cabin c over. I would be hesitant drilling holes in the windows and filling due t o potential cracking and crazing issues. Sent from my iPhone On Jun 9, 2015, at 12:17 PM, Danny Riggs wrote: I ended up using small holes in the glass and put clecos to hold. They got f illed in of course during the final finishing. Subject: Re: RV10-List: reminder of window options other than Vans From: civeng123@gmail.com As someone who just installed the rear windows, they were a major PIA. I do n't know if they were easier than Van's but I had real issues getting them i nstalled. The curve on the plexi did not match the curve of the cabin top an d required a lot of force to keep them flush. I ended up having to use ratc het straps and gorilla tape to keep them somewhat in place. Even with all o f that, they ended up somewhat proud on some of the edges. I have dry fit the windshield and have a 1/2" gap between the cabin top vert ical flange as well as a gap between the upper fuselage and the plex in seve ral places. None of these items are insurmountable, but they have definitely required mu ch more work to get them to fit than I had thought. Shannon Hicks On Tue, Jun 9, 2015 at 10:12 AM, Ed Kranz wrote: I have all the Cee Baileys (Desser) windows in my plane. There was no major c utting required to install, but there was a bit of belt sander trimming on a ll of the windows to get a perfect fit. =46rom what I've read of the Van's w indows, it was quite a bit less work, but none of them just "popped right in ". I am very happy with the end results though. On Tue, Jun 9, 2015 at 9:40 AM, Pascal wrote: This weekend I was reminded that many may have forgotten that there is the o ption to get better quality parts from http://www.vansaircrafttires.com/cate gories/RV%252d10/ (Desser Tires) than what is in the kits. I was involved with the front windscreen fitting, when my Vans bought one wa s warped in the bottom corner. They come pretty close to be ready to install without major surgery. The side windows, I hear, fit right in =9Cas i s=9D. Also Desser is where Vans gets the tires in the kits. If I were d oing all this again I would just order the tire package- http://www.vansairc rafttires.com/rv-10-main-tire-package-special-save-10-two-15-600-6pr-retread s-two-aero-classic-easy-flate-tubes/?page_context=category&faceted_search= 0. Better tires, tubes and the same price. I have seen first hand the attention to detail Desser strives for. I gain no thing from this other than knowing that I have told new builders that there a re great options, for the same, maybe less, than getting what is in the kits .. If you havent bought the windows and windscreen, I guarantee you will not re gret going this route, less cutting, shaping and better glass in general. Pascal get="_blank">http://www.matronics.com/Navigator?RV10-List tp://forums.matronics.com _blank">http://www.matronics.com/contribution get="_blank">http://www.matronics.com/Navigator?RV10-List tp://forums.matronics.com _blank">http://www.matronics.com/contribution arget="_blank">http://www.matronics.com/Navigator?RV10-List http://forums.matronics.com ="_blank">http://www.matronics.com/contribution D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D ________________________________ Message 7 _____________________________________ Time: 09:54:30 AM PST US Subject: Re: RV10-List: reminder of window options other than Vans From: Shannon Hicks This was not related to the flat spot and was about equal on both rear windows. When I place them, the top of the glass (or the bottom if I held it by the top) was a good 4 inches from touching the window flange. SH On Jun 9, 2015 11:46 AM, "Bob Leffler" wrote: > There is usually a flat spot on the door frame that needs to be built up > to follow the natural arc of the window and door. > > I fabricated "finger" out of aluminum strips and cleco'd them to the cabi n > cover. I would be hesitant drilling holes in the windows and filling d ue > to potential cracking and crazing issues. > > Sent from my iPhone > > On Jun 9, 2015, at 12:17 PM, Danny Riggs wrote: > > I ended up using small holes in the glass and put clecos to hold. They go t > filled in of course during the final finishing. > > ------------------------------ > Date: Tue, 9 Jun 2015 10:56:35 -0500 > Subject: Re: RV10-List: reminder of window options other than Vans > From: civeng123@gmail.com > To: rv10-list@matronics.com > > As someone who just installed the rear windows, they were a major PIA. I > don't know if they were easier than Van's but I had real issues getting > them installed. The curve on the plexi did not match the curve of the cab in > top and required a lot of force to keep them flush. I ended up having to > use ratchet straps and gorilla tape to keep them somewhat in place. Even > with all of that, they ended up somewhat proud on some of the edges. > > I have dry fit the windshield and have a 1/2" gap between the cabin top > vertical flange as well as a gap between the upper fuselage and the plex in > several places. > > None of these items are insurmountable, but they have definitely required > much more work to get them to fit than I had thought. > > Shannon Hicks > > > On Tue, Jun 9, 2015 at 10:12 AM, Ed Kranz wrote: > > I have all the Cee Baileys (Desser) windows in my plane. There was no > major cutting required to install, but there was a bit of belt sander > trimming on all of the windows to get a perfect fit. From what I've read of > the Van's windows, it was quite a bit less work, but none of them just > "popped right in". I am very happy with the end results though. > > On Tue, Jun 9, 2015 at 9:40 AM, Pascal wrote: > > This weekend I was reminded that many may have forgotten that there is > the option to get better quality parts from > http://www.vansaircrafttires.com/categories/RV%252d10/ (Desser Tires) > than what is in the kits. > > I was involved with the front windscreen fitting, when my Vans bought one > was warped in the bottom corner. They come pretty close to be ready to > install without major surgery. The side windows, I hear, fit right in =9Cas > is=9D. Also Desser is where Vans gets the tires in the kits. If I w ere doing > all this again I would just order the tire package- > http://www.vansaircrafttires.com/rv-10-main-tire-package-special-save-10- two-15-600-6pr-retreads-two-aero-classic-easy-flate-tubes/?page_context=c ategory&faceted_search=0. > Better tires, tubes and the same price. > > I have seen first hand the attention to detail Desser strives for. I gain > nothing from this other than knowing that I have told new builders that > there are great options, for the same, maybe less, than getting what is i n > the kits. > > If you havent bought the windows and windscreen, I guarantee you will not > regret going this route, less cutting, shaping and better glass in genera l. > > Pascal > > * > > get="_blank">http://www.matronics.com/Navigator?RV10-List > tp://forums.matronics.com > _blank">http://www.matronics.com/contribution > > * > > > * > > get="_blank">http://www.matronics.com/Navigator?RV10-List > tp://forums.matronics.com > _blank">http://www.matronics.com/contribution > > * > > > * > > arget="_blank">http://www.matronics.com/Navigator?RV10-List > http://forums.matronics.com > ="_blank">http://www.matronics.com/contribution > > * > > * > > D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D > List"">http://www.matronics.com/Navigator?RV10-List > D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D > //forums.matronics.com > D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D > ot;">http://www.matronics.com/contribution > D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D > > * > > * > =========== onics.com/Navigator?RV10-List> =========== =========== om/contribution> =========== > > * > > ________________________________ Message 8 _____________________________________ Time: 01:56:10 PM PST US From: Jeff Carpenter Subject: RV10-List: Registration form 8050-1 I've got my bill of sale in hand from Vans and am filling out form 8050-1 to send in to the FAA. What, if any, considerations should I make before filling in the blanks? Jeff Carpenter 40304 Westcott Press 1121 Isabel Street Burbank, CA 91506 jeff@westcottpress.com 818-861-7300 ________________________________ Message 9 _____________________________________ Time: 02:10:36 PM PST US Subject: Re: RV10-List: Registration form 8050-1 From: Ed Kranz I just finished my registration. Some things: You are the kit manufacturer. So in that box, I put Kranz, Edward J RV-10 Make sure your name is listed exactly how it is on the 8050-2 from Vans. Mine was LAST, FIRST MI. Make sure to print your name below your signature. And then don't forget the 8050-88, which needs to be notarized. On Tue, Jun 9, 2015 at 3:52 PM, Jeff Carpenter wrote: > I've got my bill of sale in hand from Vans and am filling out form 8050-1 > to send in to the FAA. What, if any, considerations should I make before > filling in the blanks? > > Jeff Carpenter > 40304 > > > Westcott Press > 1121 Isabel Street > Burbank, CA 91506 > jeff@westcottpress.com > 818-861-7300 > > > * > > > * > > ________________________________ Message 10 ____________________________________ Time: 02:31:19 PM PST US From: Justin Jones Subject: Re: RV10-List: Registration form 8050-1 I just went thru this. They are very particular about how to do it. Follow t his guide exactly: http://www.ruleaviation.com/forms/8050_1%20rev%204.pdf It worked perfectly for me. Justin > On Jun 9, 2015, at 12:52, Jeff Carpenter wrote: > > I've got my bill of sale in hand from Vans and am filling out form 8050-1 t o send in to the FAA. What, if any, considerations should I make before fill ing in the blanks? > > Jeff Carpenter > 40304 > > > Westcott Press > 1121 Isabel Street > Burbank, CA 91506 > jeff@westcottpress.com > 818-861-7300 > > > > > > 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > ________________________________ Message 11 ____________________________________ Time: 10:21:45 PM PST US Subject: Re: RV10-List: Registration form 8050-1 From: Ed Kranz Justin, The manufacturer field on that example form is incorrect for our aircraft. It might be accurate for an powered parachute like a SixChuter, but for E-AB, the manufacturer is the builder's name. See Mel's comment here: http://www.vansairforce.com/community/showthread.php?t=29321 Or, you can look up the registration of other RV10 builders. Ed On Tue, Jun 9, 2015 at 4:27 PM, Justin Jones wrote: > I just went thru this. They are very particular about how to do it. Follow > this guide exactly: > > http://www.ruleaviation.com/forms/8050_1%20rev%204.pdf > > It worked perfectly for me. > > Justin > > > On Jun 9, 2015, at 12:52, Jeff Carpenter wrote: > > I've got my bill of sale in hand from Vans and am filling out form 8050-1 > to send in to the FAA. What, if any, considerations should I make before > filling in the blanks? > > Jeff Carpenter > 40304 > > > Westcott Press > 1121 Isabel Street > Burbank, CA 91506 > jeff@westcottpress.com > 818-861-7300 > > > * > > D============================================ > List"">http://www.matronics.com/Navigator?RV10-List > D============================================ > //forums.matronics.com > D============================================ > ot;">http://www.matronics.com/contribution > D============================================ > > * > > * > > > * > > ________________________________ Message 12 ____________________________________ Time: 10:33:47 PM PST US From: Justin Jones Subject: Re: RV10-List: Registration form 8050-1 Thanks for catching that Ed. I missed that. You are correct. Justin > On Jun 9, 2015, at 21:17, Ed Kranz wrote: > > Justin, > > The manufacturer field on that example form is incorrect for our aircraft. It might be accurate for an powered parachute like a SixChuter, but for E-A B, the manufacturer is the builder's name. > > See Mel's comment here: http://www.vansairforce.com/community/showthread.p hp?t=29321 > > Or, you can look up the registration of other RV10 builders. > > Ed > >> On Tue, Jun 9, 2015 at 4:27 PM, Justin Jones wrote: >> I just went thru this. They are very particular about how to do it. Follo w this guide exactly: >> >> http://www.ruleaviation.com/forms/8050_1%20rev%204.pdf >> >> It worked perfectly for me. >> >> Justin >> >> >> >>> On Jun 9, 2015, at 12:52, Jeff Carpenter wrote: >>> >>> I've got my bill of sale in hand from Vans and am filling out form 8050- 1 to send in to the FAA. What, if any, considerations should I make before f illing in the blanks? >>> >>> Jeff Carpenter >>> 40304 >>> >>> >>> Westcott Press >>> 1121 Isabel Street >>> Burbank, CA 91506 >>> jeff@westcottpress.com >>> 818-861-7300 >>> >>> >>> >>> >>> >>> >>> D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D >>> List"">http://www.matronics.com/Navigator?RV10-List >>> D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D >>> //forums.matronics.com >>> D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D >>> ot;">http://www.matronics.com/contribution >>> D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D >>> >> >> >> get="_blank">http://www.matronics.com/Navigator?RV10-List >> tp://forums.matronics.com >> _blank">http://www.matronics.com/contribution >> > > > 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message rv10-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/RV10-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/rv10-list Browse Digests http://www.matronics.com/digest/rv10-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.