---------------------------------------------------------- RV10-List Digest Archive --- Total Messages Posted Sat 06/20/15: 2 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 06:48 AM - Re: Re: More on the red cube... (Albert) 2. 06:50 PM - Re: More on the red cube... (Rick Lark) ________________________________ Message 1 _____________________________________ Time: 06:48:01 AM PST US From: "Albert" Subject: RE: RV10-List: Re: More on the red cube... I have the unit mounted in the tunnel as per Vans. No problems with accuracy although variations in filling the tanks can cause variations between calculated and actual amounts. In any case I'm well satisfied with that location. I have a bottom cover into the tunnel so I can quickly inspect the tunnel for leaks as well as clean the filter. 980 hours. Albert Gardner RV-10 N991RV Yuma, AZ (Little warm here but it's a dry heat) -----Original Message----- From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of rv10flyer Sent: Friday, June 19, 2015 7:19 PM Subject: RV10-List: Re: More on the red cube... Same here Rob, have not been off more than .5 gallon. [quote="rv10rob(at)gmail.com"]The simplest way to go is to mount it in the tunnel, per plans. Perfectly accurate there (at least with my IO-540 w/ a standard FI system). -Rob ________________________________ Message 2 _____________________________________ Time: 06:50:10 PM PST US Subject: Re: RV10-List: More on the red cube... From: Rick Lark Bob88, I mounted mine on a piece of .050" thick SS plate just above the fuel servo. I copied Ivan Kristensen's example. Rick #40956 Southampton, Ont On Fri, Jun 19, 2015 at 3:00 PM, bob88 wrote: > > Has anyone with experience mounting the red cube between the servo and > spider hanging free inline (no bracket, just suspended in the hose line)? > This looks like it will take 45 deg fittings on the cube and it will hang > at about a 45 deg uphill flow position. Seems like this is simplest way to > go... > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=443816#443816 > > ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message rv10-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/RV10-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/rv10-list Browse Digests http://www.matronics.com/digest/rv10-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.