Today's Message Index:
----------------------
1. 03:16 PM - Re: Vans Aircraft Banquet (Lenny Iszak)
2. 03:21 PM - Re: More on the red cube... (Lenny Iszak)
3. 06:00 PM - Re: Re: More on the red cube... (Kelly McMullen)
4. 08:29 PM - N110DV for sale ()
5. 08:41 PM - Re: Re: More on the red cube... (Rick Lark)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Vans Aircraft Banquet |
He recommended ScotchWeld. Tested it and it wasn't very good.
I ended up using Sikaflex 295UV, because in all my tests it came out the strongest
of anything else I tried. I was never able to separate the fiberglass from
the plexi.
But as with many "improvements" over Van's recommendation it didn't work out all
that well. My paint is wrinkling over it, probably because i sanded through
most of the fiberglass layer that covers it. Oh well...
Lenny
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=444194#444194
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: More on the red cube... |
Does anyone have the lengths of the two hoses required to move the redcube between
the servo and spider?
Lenny
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=444195#444195
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: More on the red cube... |
I used about 4.5 inches and maybe 24", with the cube mounted to a fab'd
bracket under the #1 intake tube.
On Mon, Jun 29, 2015 at 3:18 PM, Lenny Iszak <lenard@rapiddecision.com>
wrote:
>
> Does anyone have the lengths of the two hoses required to move the redcube
> between the servo and spider?
>
> Lenny
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=444195#444195
>
>
Message 4
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
I have decided to put my RV10 on the market. (It is listed on
Barnstormers http://www.barnstormers.com/cat.php?) under most recent and
featured ads. The airplane is in great condition and has proven to be a
reliable IFR capable family traveler. Changing life priorities and
owning an RV-12 have prompted offering the airplane for sale. Should
you be aware of anyone in the market for a 10 I would appreciate your
pointing them to us.
Many thanks.
Dick Sipp
Message 5
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: More on the red cube... |
Lenny, Steve from Aircraft Specialty made all my oil and fuel hoses (great
to deal with btw), my servo to red cube hose is 12", the red cube to
spider is 21". Of course it kind of depends on the location of the flow
transducer. Mine is on a SS bracket just under the case, almost identical
to what Ivan Kristensen did.
Rick
On Mon, Jun 29, 2015 at 6:18 PM, Lenny Iszak <lenard@rapiddecision.com>
wrote:
>
> Does anyone have the lengths of the two hoses required to move the redcube
> between the servo and spider?
>
> Lenny
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=444195#444195
>
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|