Today's Message Index:
----------------------
1. 09:43 AM - removing seat (amekler)
2. 10:12 AM - Re: removing seat (Bob Turner)
3. 10:21 AM - Re: removing seat (Carl Froehlich)
4. 10:52 AM - Re: removing seat (Geoff Combs)
5. 11:15 AM - Re: IO-540 mount ears nuts (Jae Chang)
6. 12:33 PM - Re: Re: removing seat (Linn Walters)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
I need to remove my front seat back for a upholstery repair
Can the seat back be removed or must I remove the whole seat?
What is easiest?
Alan
ps does anyone have a schematic of the seat?
Alan
N668G
330 hrs
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=445671#445671
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: removing seat |
I imagine it can be done either way, but I'd remove the whole seat. With a small
modification (shorten the rail, or bevel the front slide on the seat) you can
remove the seat without removing the flap cover.
--------
Bob Turner
RV-10 QB
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=445672#445672
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Don't even try to remove the seat back. Take the whole seat out.
Carl
-----Original Message-----
From: owner-rv10-list-server@matronics.com
[mailto:owner-rv10-list-server@matronics.com] On Behalf Of amekler
Sent: Friday, August 07, 2015 12:38 PM
Subject: RV10-List: removing seat
I need to remove my front seat back for a upholstery repair Can the seat
back be removed or must I remove the whole seat?
What is easiest?
Alan
ps does anyone have a schematic of the seat?
Alan
N668G
330 hrs
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=445671#445671
Message 4
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
You can remove the upper back pretty easy. Roll your seat cover up about 6-8
inches and then there are 4 1/4-28 screws with
Lock nuts remove these. Very easy. See photo They might be a little harder
to get to while in the aircraft
Geoff Combs
-----Original Message-----
From: owner-rv10-list-server@matronics.com
[mailto:owner-rv10-list-server@matronics.com] On Behalf Of Carl Froehlich
Sent: Friday, August 07, 2015 1:18 PM
Subject: RE: RV10-List: removing seat
--> <carl.froehlich@verizon.net>
Don't even try to remove the seat back. Take the whole seat out.
Carl
-----Original Message-----
From: owner-rv10-list-server@matronics.com
[mailto:owner-rv10-list-server@matronics.com] On Behalf Of amekler
Sent: Friday, August 07, 2015 12:38 PM
Subject: RV10-List: removing seat
I need to remove my front seat back for a upholstery repair Can the seat
back be removed or must I remove the whole seat?
What is easiest?
Alan
ps does anyone have a schematic of the seat?
Alan
N668G
330 hrs
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=445671#445671
Message 5
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: IO-540 mount ears nuts |
I find it amazing that you find better instructions with a lowly Ikea
chair than you do with a new engine! ;)
On 8/6/2015 12:44 AM, Dan Charrois wrote:
>
> Bingo - I think you nailed it. I'd thought the hardware in there was for the
injector, but it does appear as though nuts and washers matching the description
of those I've seen mentioned earlier in this maillist for the mounting ears
are in there - that must be them. Thanks!
>
> Dan
>
>
--
#40533 RV-10
First flight 10/19/2011
Phase 1 Done 11/26/2011
do not archive
Message 6
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: removing seat |
I beveled the fwd upper part of the nylon insert back about 1/2" all the
way across (real thin at the fwd end) so the rear of the seat can be
lifted to clear the flap cover. No need to shorten the rail. I tapped
the mounting holes in the seat lock and used bolts to hold it in place.
Lift the seat cushion up and a ratchet makes quick work of the bolts.
You have to either remove the stop or the lock .....
Linn
On 8/7/2015 1:08 PM, Bob Turner wrote:
>
> I imagine it can be done either way, but I'd remove the whole seat. With a small
modification (shorten the rail, or bevel the front slide on the seat) you
can remove the seat without removing the flap cover.
>
> --------
> Bob Turner
> RV-10 QB
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=445672#445672
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
>
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|