---------------------------------------------------------- RV10-List Digest Archive --- Total Messages Posted Thu 08/13/15: 9 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 04:26 AM - Re: Stick travel (John Trollinger) 2. 09:48 AM - Re: removing seat (Alan Mekler MD) 3. 10:03 AM - Re: removing seat (Ed Kranz) 4. 10:07 AM - Re: removing seat (Sean Stephens) 5. 10:14 AM - Re: removing seat (Alan Mekler MD) 6. 10:18 AM - Re: removing seat (Marcus Cooper) 7. 10:44 AM - Re: removing seat (Tim Olson) 8. 01:40 PM - Re: removing seat (David Clifford) 9. 03:43 PM - Re: removing seat (Alan Mekler MD) ________________________________ Message 1 _____________________________________ Time: 04:26:06 AM PST US Subject: Re: RV10-List: Stick travel From: John Trollinger I did the same thing, works like a charm On Wed, Aug 12, 2015 at 8:25 AM, Geoff Combs wrote: > Myron > This came from I think Deems but it works really good. It's a piece ok > angle > aluminum with a notch cut to required > Stop. Use 2 10/32 screws or bolts with lock nuts. > > Geoff Combs > > -----Original Message----- > From: owner-rv10-list-server@matronics.com > [mailto:owner-rv10-list-server@matronics.com] On Behalf Of woxofswa > Sent: Wednesday, August 12, 2015 12:57 AM > To: rv10-list@matronics.com > Subject: RV10-List: Stick travel > > > I would like to limit my elevator down travel ever so slightly (about a 1/4 > inch of stick travel.). I'd like to query this fabulous brain trust on the > preferred method to accomplish that. [/b] > > -------- > Myron Nelson > Mesa, AZ > Flew May 10 2014 > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=445853#445853 > > ________________________________ Message 2 _____________________________________ Time: 09:48:36 AM PST US From: Alan Mekler MD Subject: Re: RV10-List: removing seat I took the seat out today Could not get a socket wrench in so had to use an open end which made it tedious .. Any one come across a small socket set that would fit? Alan Sent from my iPhone > On Aug 7, 2015, at 1:18 PM, Carl Froehlich wrote: > > > Don't even try to remove the seat back. Take the whole seat out. > > Carl > > -----Original Message----- > From: owner-rv10-list-server@matronics.com > [mailto:owner-rv10-list-server@matronics.com] On Behalf Of amekler > Sent: Friday, August 07, 2015 12:38 PM > To: rv10-list@matronics.com > Subject: RV10-List: removing seat > > > I need to remove my front seat back for a upholstery repair Can the seat > back be removed or must I remove the whole seat? > What is easiest? > Alan > > ps does anyone have a schematic of the seat? > > Alan > N668G > 330 hrs > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=445671#445671 > > > > > > > > > > > > > > ________________________________ Message 3 _____________________________________ Time: 10:03:01 AM PST US Subject: Re: RV10-List: removing seat From: Ed Kranz Would one of these fit? On Thu, Aug 13, 2015 at 11:31 AM, Alan Mekler MD wrote: > > I took the seat out today > Could not get a socket wrench in so had to use an open end which made it > tedious . > Any one come across a small socket set that would fit? > Alan > > > Sent from my iPhone > > > On Aug 7, 2015, at 1:18 PM, Carl Froehlich > wrote: > > > carl.froehlich@verizon.net> > > > > Don't even try to remove the seat back. Take the whole seat out. > > > > Carl > > > > -----Original Message----- > > From: owner-rv10-list-server@matronics.com > > [mailto:owner-rv10-list-server@matronics.com] On Behalf Of amekler > > Sent: Friday, August 07, 2015 12:38 PM > > To: rv10-list@matronics.com > > Subject: RV10-List: removing seat > > > > > > I need to remove my front seat back for a upholstery repair Can the seat > > back be removed or must I remove the whole seat? > > What is easiest? > > Alan > > > > ps does anyone have a schematic of the seat? > > > > Alan > > N668G > > 330 hrs > > > > > > > > > > Read this topic online here: > > > > http://forums.matronics.com/viewtopic.php?p=445671#445671 > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ________________________________ Message 4 _____________________________________ Time: 10:07:21 AM PST US From: Sean Stephens Subject: Re: RV10-List: removing seat I ran into that issue also. I believe the carevout for the forward bolt in the seat rail stop is too small to get a standard wall socket in there. If I remember correctly, I purchased a set of thin wall sockets and that did the trick. -Sean #40303 (bird at the paint shop. pilot has lack of flying withdrawls) > Alan Mekler MD > August 13, 2015 at 11:31 AM > > I took the seat out today > Could not get a socket wrench in so had to use an open end which made > it tedious . > Any one come across a small socket set that would fit? > Alan > > > Sent from my iPhone > > ________________________________ Message 5 _____________________________________ Time: 10:14:43 AM PST US From: Alan Mekler MD Subject: Re: RV10-List: removing seat I tried one of those the head was too big to fit onto the bolt Alan Sent from my iPhone > On Aug 13, 2015, at 12:59 PM, Ed Kranz wrote: > > Would one of these fit? > > >> On Thu, Aug 13, 2015 at 11:31 AM, Alan Mekler MD w rote: >> >> I took the seat out today >> Could not get a socket wrench in so had to use an open end which made it t edious . >> Any one come across a small socket set that would fit? >> Alan >> >> >> Sent from my iPhone >> >> > On Aug 7, 2015, at 1:18 PM, Carl Froehlich wrote: >> > on.net> >> > >> > Don't even try to remove the seat back. Take the whole seat out. >> > >> > Carl >> > >> > -----Original Message----- >> > From: owner-rv10-list-server@matronics.com >> > [mailto:owner-rv10-list-server@matronics.com] On Behalf Of amekler >> > Sent: Friday, August 07, 2015 12:38 PM >> > To: rv10-list@matronics.com >> > Subject: RV10-List: removing seat >> > >> > >> > I need to remove my front seat back for a upholstery repair Can the sea t >> > back be removed or must I remove the whole seat? >> > What is easiest? >> > Alan >> > >> > ps does anyone have a schematic of the seat? >> > >> > Alan >> > N668G >> > 330 hrs >> > >> > >> > >> > >> > Read this topic online here: >> > >> > http://forums.matronics.com/viewtopic.php?p=445671#445671 >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> >> >> = >> -List" rel="noreferrer" target="_blank">http://www.matronics.com/Navi gator?RV10-List >> ========== >> FORUMS - >> eferrer" target="_blank">http://forums.matronics.com >> ========== >> b Site - >> -Matt Dralle, List Admin. >> rel="noreferrer" target="_blank">http://www.matronics.com/contributio n >> ========== > > > 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > ________________________________ Message 6 _____________________________________ Time: 10:18:58 AM PST US Subject: Re: RV10-List: removing seat From: Marcus Cooper Ive used the ratchet wrenches a lot. I cant remember if ti will work there, but they really make life easy when applicable. The quality brands are worth the extra $$. Marcus > On Aug 14, 2015, at 1:31 AM, Alan Mekler MD wrote: > > > I took the seat out today > Could not get a socket wrench in so had to use an open end which made it tedious .. > Any one come across a small socket set that would fit? > Alan > > > Sent from my iPhone > >> On Aug 7, 2015, at 1:18 PM, Carl Froehlich wrote: >> >> >> Don't even try to remove the seat back. Take the whole seat out. >> >> Carl >> >> -----Original Message----- >> From: owner-rv10-list-server@matronics.com >> [mailto:owner-rv10-list-server@matronics.com] On Behalf Of amekler >> Sent: Friday, August 07, 2015 12:38 PM >> To: rv10-list@matronics.com >> Subject: RV10-List: removing seat >> >> >> I need to remove my front seat back for a upholstery repair Can the seat >> back be removed or must I remove the whole seat? >> What is easiest? >> Alan >> >> ps does anyone have a schematic of the seat? >> >> Alan >> N668G >> 330 hrs >> >> >> >> >> Read this topic online here: >> >> http://forums.matronics.com/viewtopic.php?p=445671#445671 >> >> >> >> >> >> >> >> >> >> >> >> >> >> > > > > > ________________________________ Message 7 _____________________________________ Time: 10:44:49 AM PST US From: Tim Olson Subject: Re: RV10-List: removing seat And, don't buy the ones that don't reverse. You can sometimes get stuck not being able to get the Wrench off, if you don't have the reversing ones. Tim > On Aug 13, 2015, at 12:13 PM, Marcus Cooper wrote: > > > Ive used the ratchet wrenches a lot. I cant remember if ti will work there, but they really make life easy when applicable. The quality brands are worth the extra $$. > > Marcus > > >> On Aug 14, 2015, at 1:31 AM, Alan Mekler MD wrote: >> >> >> I took the seat out today >> Could not get a socket wrench in so had to use an open end which made it tedious .. >> Any one come across a small socket set that would fit? >> Alan >> >> >> Sent from my iPhone >> >>> On Aug 7, 2015, at 1:18 PM, Carl Froehlich wrote: >>> >>> >>> Don't even try to remove the seat back. Take the whole seat out. >>> >>> Carl >>> >>> -----Original Message----- >>> From: owner-rv10-list-server@matronics.com >>> [mailto:owner-rv10-list-server@matronics.com] On Behalf Of amekler >>> Sent: Friday, August 07, 2015 12:38 PM >>> To: rv10-list@matronics.com >>> Subject: RV10-List: removing seat >>> >>> >>> I need to remove my front seat back for a upholstery repair Can the seat >>> back be removed or must I remove the whole seat? >>> What is easiest? >>> Alan >>> >>> ps does anyone have a schematic of the seat? >>> >>> Alan >>> N668G >>> 330 hrs >>> >>> >>> >>> >>> Read this topic online here: >>> >>> http://forums.matronics.com/viewtopic.php?p=445671#445671 > > > > > > ________________________________ Message 8 _____________________________________ Time: 01:40:33 PM PST US From: David Clifford Subject: Re: RV10-List: removing seat A thin wall 1/4" drive socket works great. I just ground a standard socket down to fit and keep it separated for just that purpose to remove the seat. Sent from my iPad > On Aug 13, 2015, at 12:31 PM, Alan Mekler MD wrote: > > > I took the seat out today > Could not get a socket wrench in so had to use an open end which made it tedious .. > Any one come across a small socket set that would fit? > Alan > > > Sent from my iPhone > >> On Aug 7, 2015, at 1:18 PM, Carl Froehlich wrote: >> >> >> Don't even try to remove the seat back. Take the whole seat out. >> >> Carl >> >> -----Original Message----- >> From: owner-rv10-list-server@matronics.com >> [mailto:owner-rv10-list-server@matronics.com] On Behalf Of amekler >> Sent: Friday, August 07, 2015 12:38 PM >> To: rv10-list@matronics.com >> Subject: RV10-List: removing seat >> >> >> I need to remove my front seat back for a upholstery repair Can the seat >> back be removed or must I remove the whole seat? >> What is easiest? >> Alan >> >> ps does anyone have a schematic of the seat? >> >> Alan >> N668G >> 330 hrs >> >> >> >> >> Read this topic online here: >> >> http://forums.matronics.com/viewtopic.php?p=445671#445671 > > > > > ________________________________ Message 9 _____________________________________ Time: 03:43:11 PM PST US Subject: Re: RV10-List: removing seat From: Alan Mekler MD sounds like the easiest way. alan > On Aug 7, 2015, at 12:38 PM, amekler wrote: > > > I need to remove my front seat back for a upholstery repair > Can the seat back be removed or must I remove the whole seat? > What is easiest? > Alan > > ps does anyone have a schematic of the seat? > > Alan > N668G > 330 hrs > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=445671#445671 > > > > > > > > > > ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message rv10-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/RV10-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/rv10-list Browse Digests http://www.matronics.com/digest/rv10-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.