---------------------------------------------------------- RV10-List Digest Archive --- Total Messages Posted Sat 10/10/15: 12 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 08:32 AM - where is static port located? (amekler) 2. 09:31 AM - Re: where is static port located? (John Trollinger) 3. 09:36 AM - Re: where is static port located? (bdgillespie215@gmail.com) 4. 09:56 AM - Re: where is static port located? (Tcwtech) 5. 09:57 AM - WTB: RV-10 Kit (fdombroski) 6. 09:57 AM - Re: where is static port located? (Albert) 7. 10:07 AM - Re: where is static port located? (Marcus Cooper) 8. 11:36 AM - Found it (Alan Mekler MD) 9. 11:54 AM - Re: Found it (William Greenley) 10. 12:09 PM - Re: Found it (Bob Turner) 11. 01:13 PM - Re: Re: Found it (Alan Mekler MD) 12. 10:11 PM - Re: Re: Fuel Sender - Installation/Sealing (Phillip Perry) ________________________________ Message 1 _____________________________________ Time: 08:32:10 AM PST US Subject: RV10-List: where is static port located? From: "amekler" my pitot static transponder check is due and my avionics guy wants to know where my static port is located. i 've looked but can't seem to find it Alan N668G Read this topic online here: http://forums.matronics.com/viewtopic.php?p=447797#447797 ________________________________ Message 2 _____________________________________ Time: 09:31:27 AM PST US Subject: Re: RV10-List: where is static port located? From: John Trollinger you should have one on the left and right side of the plane in the tail cone. On Sat, Oct 10, 2015 at 11:28 AM, amekler wrote: > > my pitot static transponder check is due and my avionics guy wants to know > where my static port is located. i 've looked but can't seem to find it > Alan > N668G > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=447797#447797 > > ________________________________ Message 3 _____________________________________ Time: 09:36:13 AM PST US From: bdgillespie215@gmail.com Subject: Re: RV10-List: where is static port located? There should be two. Both on the tail cone just forward of the horizontal stabilizer. Ref section 10-25 in plans. Byron Sent from my iPhone > On Oct 10, 2015, at 11:28 AM, amekler wrote: > > > my pitot static transponder check is due and my avionics guy wants to know where my static port is located. i 've looked but can't seem to find it > Alan > N668G > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=447797#447797 > > > > > > > > > > ________________________________ Message 4 _____________________________________ Time: 09:56:47 AM PST US From: Tcwtech Subject: Re: RV10-List: where is static port located? Empennage, about 1 ft in front of horizontal stabilizer. Bob Newman TCW Technologies, LLC 610-928-3420 > On Oct 10, 2015, at 11:28 AM, amekler wrote: > > > my pitot static transponder check is due and my avionics guy wants to know where my static port is located. i 've looked but can't seem to find it > Alan > N668G > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=447797#447797 > > > > > > > > > > ________________________________ Message 5 _____________________________________ Time: 09:57:02 AM PST US Subject: RV10-List: WTB: RV-10 Kit From: "fdombroski" Prefer QB, but open to top quality standard build. Prefer close to North East, but will travel west for the right project/deal. Looking for a winter project. Please let me know what you have. email frankdombroski at gmail.com Best, Frank -------- Frank Dombroski RV-10 2.0 N46VT soon to be flying KSMQ Somerset Airport NJ Read this topic online here: http://forums.matronics.com/viewtopic.php?p=447798#447798 ________________________________ Message 6 _____________________________________ Time: 09:57:03 AM PST US From: "Albert" Subject: RE: RV10-List: where is static port located? I take it that you are not the builder. Most static ports are on each side of the tail cone near the longeron. They are ofter the round head of a pull rivet but some have installed commerical static ports that might be larger. If they are completely flush they don't seem to work as will and have errors. If you have angle-of-attack the AOA port is on the bottom of the pitot tube. Albert Gardner N991RV Yuma, AZ -----Original Message----- From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of amekler Sent: Saturday, October 10, 2015 8:28 AM Subject: RV10-List: where is static port located? my pitot static transponder check is due and my avionics guy wants to know where my static port is located. i 've looked but can't seem to find it Alan N668G Read this topic online here: http://forums.matronics.com/viewtopic.php?p=447797#447797 ________________________________ Message 7 _____________________________________ Time: 10:07:37 AM PST US Subject: Re: RV10-List: where is static port located? From: Marcus Cooper Alan, Typically it is on both sides of the fuselage aft of the luggage door by a couple of feet about midway up the side. Should be a small silver disk or large pop rivet. Marcus Sent from my iPhone > On Oct 10, 2015, at 11:28 AM, amekler wrote: > > > my pitot static transponder check is due and my avionics guy wants to know where my static port is located. i 've looked but can't seem to find it > Alan > N668G > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=447797#447797 > > > > > > > > > > ________________________________ Message 8 _____________________________________ Time: 11:36:22 AM PST US From: Alan Mekler MD Subject: RV10-List: Found it Very hard to see the small static hole Looked like a rivet Alan Ps leaving a paper clip in it so the avionics guy can find it Sent from my iPhone
________________________________ Message 9 _____________________________________ Time: 11:54:06 AM PST US From: "William Greenley" Subject: RE: RV10-List: Found it It is a rivet, at least a pop rivet if done according to plans. -----Original Message----- From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Alan Mekler MD Sent: Saturday, October 10, 2015 2:06 PM Subject: RV10-List: Found it Very hard to see the small static hole Looked like a rivet Alan Ps leaving a paper clip in it so the avionics guy can find it ________________________________ Message 10 ____________________________________ Time: 12:09:50 PM PST US Subject: RV10-List: Re: Found it From: "Bob Turner" There is most likely a second one on the other side. -------- Bob Turner RV-10 QB Read this topic online here: http://forums.matronics.com/viewtopic.php?p=447808#447808 ________________________________ Message 11 ____________________________________ Time: 01:13:41 PM PST US Subject: Re: RV10-List: Re: Found it From: Alan Mekler MD yes, found that as well. alan > On Oct 10, 2015, at 3:06 PM, Bob Turner wrote: > > > There is most likely a second one on the other side. > > -------- > Bob Turner > RV-10 QB > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=447808#447808 > > > > > > > > > > ________________________________ Message 12 ____________________________________ Time: 10:11:22 PM PST US Subject: Re: RV10-List: Re: Fuel Sender - Installation/Sealing From: Phillip Perry Thanks for all the info. I'll just slather the rubber gaskets up with EZ Turn and give them shot. Thanks again, Phil On Thu, Oct 8, 2015 at 6:23 PM, dmaib@me.com wrote: > > I installed mine with the rubber gasket that comes with the sender. Put a > little fuel lube on the gasket and the screws, but am not sure that is even > necessary. 7 years and 800 hours with no leaks. During this time, I have > removed each side once to replace the sender and the right side another > time chasing a grounding problem. Very easy job. > I believe the secret is to go easy when tightening the screws. Don't over > tighten them, and tighten them evenly. The senders are made to be installed > with the rubber gasket. > > -------- > David Maib > RV-10 #40559 > New Smyrna Beach, FL > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=447764#447764 > > ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message rv10-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/RV10-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/rv10-list Browse Digests http://www.matronics.com/digest/rv10-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.