---------------------------------------------------------- RV10-List Digest Archive --- Total Messages Posted Sat 11/14/15: 6 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 09:37 AM - Re: Re: AeroElectric-List: Stratux Build (Pascal) 2. 09:48 AM - Re: Re: AeroElectric-List: Stratux Build (Dj Merrill) 3. 07:05 PM - Wheel Servicing (kearney) 4. 08:22 PM - Re: Wheel Servicing (Kelly McMullen) 5. 09:04 PM - Re: Wheel Servicing (Bob Leffler) 6. 11:11 PM - Re: Wheel Servicing (Pascal) ________________________________ Message 1 _____________________________________ Time: 09:37:59 AM PST US From: "Pascal" Subject: Re: RV10-List: Re: AeroElectric-List: Stratux Build I have FltplanGo, and there is the option to add a custom ADS-B. I just dont know what the "port" would be. How did you get it configured on the WingX? Thx -----Original Message----- From: Dj Merrill Sent: Thursday, November 12, 2015 6:01 PM Subject: RV10-List: Re: AeroElectric-List: Stratux Build On 11/12/2015 7:55 PM, Justin Jones wrote: > For those of you looking for an inexpensive solution for an ADS-B in (with > AHRS if desired), this appears to be a relatively easy project. I am going > to tackle it early next month. It is very easy. I gathered the parts together and assembled it inside a 3D printed case during one of our EAA meetings. I had a chance to fly with it a couple of weeks ago, and the iPad/Stratux/WingX combination saw the same ADS-B traffic as the SkyRadar/GRT-HX combination. There is a beginners guide here: https://github.com/ssokol/stratux/wiki/Stratux-Beginner's-Guide The 3D case files can be found at: http://www.thingiverse.com/thing:1019324 -Dj -- Dj Merrill - N1JOV - EAA Chapter 87 Sportsman 2+2 Builder #7118 N421DJ - http://deej.net/sportsman/ Glastar Flyer N866RH - http://deej.net/glastar/ ________________________________ Message 2 _____________________________________ Time: 09:48:41 AM PST US Subject: Re: RV10-List: Re: AeroElectric-List: Stratux Build From: Dj Merrill On 11/14/2015 12:34 PM, Pascal wrote: > How did you get it configured on the WingX? The Stratux creates a private wireless network. On the iPad, all you have to do is go to the wireless settings and join the "stratux" wireless network. WingX then sees the ADS-B receiver and "just works". -Dj -- Dj Merrill - N1JOV - EAA Chapter 87 Sportsman 2+2 Builder #7118 N421DJ - http://deej.net/sportsman/ Glastar Flyer N866RH - http://deej.net/glastar/ ________________________________ Message 3 _____________________________________ Time: 07:05:36 PM PST US Subject: RV10-List: Wheel Servicing From: "kearney" Hi I am just starting my annual inspection and have a couple of questions related to wheel servicing. There are: 1. Does anyone have a simple / safe / effective means for lifting and supporting a wing while a wheel is removed. I have a motorcycle jack that I have used under the fuse but am wondering if there is something better. 2. How often should tires be swapped from side to side Cheers Les Read this topic online here: http://forums.matronics.com/viewtopic.php?p=449398#449398 ________________________________ Message 4 _____________________________________ Time: 08:22:36 PM PST US Subject: Re: RV10-List: Wheel Servicing From: Kelly McMullen Depends on the type of aircraft. You can use a padded sawhorse if it is tall enough and you have helper to move it in place. Or most wing jacks work fine when you replace tie down eye with a round headed carriage bolt for the jack point. To get even wear you would have to reverse the tire on the wheel. Swapping wheels side for side will not do anything. On 11/14/2015 7:33 PM, kearney wrote: > > Hi > > I am just starting my annual inspection and have a couple of questions related to wheel servicing. There are: > > 1. Does anyone have a simple / safe / effective means for lifting and supporting a wing while a wheel is removed. I have a motorcycle jack that I have used under the fuse but am wondering if there is something better. > > 2. How often should tires be swapped from side to side > > Cheers > > Les > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=449398#449398 > > ________________________________ Message 5 _____________________________________ Time: 09:04:19 PM PST US From: Bob Leffler Subject: Re: RV10-List: Wheel Servicing I have jacks that use a hard point in the wing tie down hole. They use an inexpensive bottle jack from harbor freight. I think it really depends on how much you are flying. I swapped mine when I was around 100 tach hours. They didn't really show any wear, but I swapped them anyways. Sent from my iPad > On Nov 14, 2015, at 9:33 PM, kearney wrote: > > > Hi > > I am just starting my annual inspection and have a couple of questions related to wheel servicing. There are: > > 1. Does anyone have a simple / safe / effective means for lifting and supporting a wing while a wheel is removed. I have a motorcycle jack that I have used under the fuse but am wondering if there is something better. > > 2. How often should tires be swapped from side to side > > Cheers > > Les > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=449398#449398 > > > > > > > > > > ________________________________ Message 6 _____________________________________ Time: 11:11:41 PM PST US From: "Pascal" Subject: Re: RV10-List: Wheel Servicing I'm using a couple of work horses that are adjustable under the wings and they have help well. The tires- look at the outside (as the rest doesnt get much wear, once the tread starts to disappear, its time to flip (as in outside becomes inside of wheel) I just bought replacement tires as the originals are now reaching the end of the tread life. The center of the tires look pretty darn new- darn it!! -----Original Message----- From: kearney Sent: Saturday, November 14, 2015 6:33 PM Subject: RV10-List: Wheel Servicing Hi I am just starting my annual inspection and have a couple of questions related to wheel servicing. There are: 1. Does anyone have a simple / safe / effective means for lifting and supporting a wing while a wheel is removed. I have a motorcycle jack that I have used under the fuse but am wondering if there is something better. 2. How often should tires be swapped from side to side Cheers Les Read this topic online here: http://forums.matronics.com/viewtopic.php?p=449398#449398 ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message rv10-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/RV10-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/rv10-list Browse Digests http://www.matronics.com/digest/rv10-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.