---------------------------------------------------------- RV10-List Digest Archive --- Total Messages Posted Tue 11/17/15: 7 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 06:19 AM - wheel jack (Chris Hukill) 2. 09:27 AM - Re: wheel jack (Rob Kermanj) 3. 03:33 PM - Re: wheel jack (Shannon Hicks) 4. 03:50 PM - Re: wheel jack (Alan Mekler MD) 5. 05:05 PM - Re: wheel jack (Albert) 6. 06:13 PM - Re: wheel jack (Linn Walters) 7. 08:12 PM - Re: wheel jack (gulf) ________________________________ Message 1 _____________________________________ Time: 06:19:46 AM PST US From: "Chris Hukill" Subject: RV10-List: wheel jack this is how I did it ________________________________ Message 2 _____________________________________ Time: 09:27:49 AM PST US From: Rob Kermanj Subject: Re: RV10-List: wheel jack Nice! How about making the adopter for sale? do not archive. > On Nov 17, 2015, at 9:16 AM, Chris Hukill wrote: > > this is how I did it > > ________________________________ Message 3 _____________________________________ Time: 03:33:28 PM PST US Subject: Re: RV10-List: wheel jack From: Shannon Hicks I'm in for one! Shannon On Tue, Nov 17, 2015 at 11:24 AM, Rob Kermanj wrote: > Nice! > > How about making the adopter for sale? > > do not archive. > > On Nov 17, 2015, at 9:16 AM, Chris Hukill wrote: > > this is how I did it > > > > ________________________________ Message 4 _____________________________________ Time: 03:50:40 PM PST US From: Alan Mekler MD Subject: Re: RV10-List: wheel jack Me too! Alan N668G Sent from my iPhone > On Nov 17, 2015, at 6:29 PM, Shannon Hicks wrote: > > I'm in for one! > > Shannon > >> On Tue, Nov 17, 2015 at 11:24 AM, Rob Kermanj wrote: >> Nice! >> >> How about making the adopter for sale? >> >> do not archive. >>> On Nov 17, 2015, at 9:16 AM, Chris Hukill wrote: >>> >>> this is how I did it >>> >>> > ________________________________ Message 5 _____________________________________ Time: 05:05:27 PM PST US From: "Albert" Subject: RE: RV10-List: wheel jack If you have gear leg fairings installed this method won't work. There is also an extension that goes into the gear leg after you remove the axel nut. It has a place where a bottle jack would fit to raise the wheel off of the ground. But, you have to remove the wheel pant first. First flat I had away from home I found the two bottom screws in my wheel pant were almot sitting on the ground and I couldn't remove them. Now those botton screws are hex head so I can get to them. Even so I prefer my wing jacks. Albert Gardner RV-10 N991RV Yuma, AZ From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Chris Hukill Sent: Tuesday, November 17, 2015 7:16 AM Subject: RV10-List: wheel jack this is how I did it ________________________________ Message 6 _____________________________________ Time: 06:13:32 PM PST US Subject: Re: RV10-List: wheel jack From: Linn Walters I could see the problem with the lower screws coming so I moved them up 2" from the wheel cutout. I have 6 nutplates on my Pitts that I can't get to with the wings on ..... and the holes are terribly noticeable. I give a lot of thought to where I place the nutplates now! Again, my scissors jack fits under a 3' X 3/4" iron pipe inserted in the main axle. Lots cheaper than gear leg fitting and it works with the gear fairings on. Linn On 11/17/2015 8:02 PM, Albert wrote: > > If you have gear leg fairings installed this method won't work. There > is also an extension that goes into the gear leg after you remove the > axel nut. It has a place where a bottle jack would fit to raise the > wheel off of the ground. But, you have to remove the wheel pant first. > First flat I had away from home I found the two bottom screws in my > wheel pant were almot sitting on the ground and I couldn't remove > them. Now those botton screws are hex head so I can get to them. Even > so I prefer my wing jacks. > > Albert Gardner > > RV-10 N991RV > > Yuma, AZ > > *From:*owner-rv10-list-server@matronics.com > [mailto:owner-rv10-list-server@matronics.com] *On Behalf Of *Chris Hukill > *Sent:* Tuesday, November 17, 2015 7:16 AM > *To:* matronics > *Subject:* RV10-List: wheel jack > > this is how I did it > ________________________________ Message 7 _____________________________________ Time: 08:12:49 PM PST US From: "gulf" Subject: RE: RV10-List: wheel jack Count me in for one if you wind up making a batch for everybody From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Chris Hukill Sent: Tuesday, November 17, 2015 6:16 AM Subject: RV10-List: wheel jack this is how I did it ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message rv10-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/RV10-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/rv10-list Browse Digests http://www.matronics.com/digest/rv10-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.