---------------------------------------------------------- RV10-List Digest Archive --- Total Messages Posted Tue 12/08/15: 7 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 03:54 AM - Re: Slick Mag 1100 hrs. (Rob Kermanj) 2. 04:55 AM - Re: Heavy Duty Gas Struts (rv10flyer) 3. 08:31 AM - Re: Re: Heavy Duty Gas Struts (Jae Chang) 4. 12:47 PM - Re: AEROSPORT PRODUCTS NEW AEROVENTS (Rob Kermanj) 5. 02:17 PM - Re: AEROSPORT PRODUCTS NEW AEROVENTS (Ben Westfall) 6. 02:38 PM - Re: AEROSPORT PRODUCTS NEW AEROVENTS (Rob Kermanj) 7. 03:15 PM - Re: AEROSPORT PRODUCTS NEW AEROVENTS (Geoff Combs) ________________________________ Message 1 _____________________________________ Time: 03:54:56 AM PST US From: Rob Kermanj Subject: Re: RV10-List: Slick Mag 1100 hrs. Just a clarification: The SB shows a new cushion design and a new mag drive as a matched set that prevents the cushions falling into the case during installation. The issue of the cushions getting brittle, breaking and falling into the case remains. Do not archive > On Dec 7, 2015, at 10:52 AM, David Saylor wrote: > > I poked around and found Lyc Service Instruction 1299B. It has p/ns, pictures, applicability, yada yada. I'm not sure if they work on all Lycomings but the SI gives SN ranges. --D > > On Sunday, December 6, 2015, Tim Olson > wrote: > You don't happen to have the info on the p/n or manufacturer and compatibility with our IO-540's do you? > I've had mine out a couple times but have not replaced them and they're almost 1200 hours old so I figured I'd order 2 or 3 pairs, since I'll have 2 airplanes to care for. > Tim > > > > On Dec 6, 2015, at 7:29 PM, David Saylor > wrote: > >> I installed two Slicks on a newer Lycoming at work the other day. The drive pads were a different design with tabs that engaged slots in the drive gears. It was pretty easy to feel the pads snap into place, and once engaged they stayed in place really well. >> >> I know in the past (my own plane in particular) I've battled trying to keep the pads in place while wresting the mags into the holes. The new design makes it pretty easy. >> >> --Dave >> >> On Sun, Dec 6, 2015 at 12:16 PM, Rob Kermanj > wrote: >> On my last flight, I felt a miss on climb out so I decided to pull the mags and take a look. >> >> As soon as I pulled the mags, I noticed that pieces of Mag Drive Cushions were missing on both mags and I could not find them in the mag hole. >> >> So I drained the oil and pull the Oil Suction Screen out and to my pleasant surprise, both pieces were found in the strainer. >> >> The part no. for the cushions is LW13641. I recommend that they are replaced every time the mags are pulled out. The new parts feel soft and the old parts were brittle, I assume due to heat. >> >> The cushions are held in place temporarily with fuel lube during the mag installation so you want to be sure they do not fall out while you are inserting the mag into the drive. >> >> The mag components all checked out and everything looked good. I cleaned all the parts and replaced one rotor and the engine runs very smooth now. Not sure if the cushions had anything to do with the engine miss or not. >> >> DO NOT ARCHIVE. >> >> >> >> >> >> >> >> Rob Kermanj >> >> >> >> ________________________________ Message 2 _____________________________________ Time: 04:55:36 AM PST US Subject: RV10-List: Re: Heavy Duty Gas Struts From: "rv10flyer" I have installed A1A1F5O-100-287/600N 10017y1 struts after 4 years and a knot on my head. I need to turn them around for the dampening. They were slightly shorter than original struts from 2011 build. I did have to remove a washer or two on each end as the fitting was thicker. I have noticed that the doors when closed, but unlatched sit out farther and we must pull in to ensure the center cam and pins engage properly. I have Sean's latch and painted door. -------- Wayne G. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=450817#450817 ________________________________ Message 3 _____________________________________ Time: 08:31:29 AM PST US Subject: Re: RV10-List: Re: Heavy Duty Gas Struts From: Jae Chang I actually prefer to have my door operate this way. IE, stock, the door will start to close on its own about 2 feet away from closing. With 2 ft to go, it can still build up a good bit of momentum and slam the door shut. Worse if someone actually slams it shut for you, then the door will REALLY slam shut. Not good. :( With the greater force, it will resist getting slammed shut. At least it should. Latching will def be a bit harder as you say, though. Jae On 12/8/2015 4:52 AM, rv10flyer wrote: > > I have installed A1A1F5O-100-287/600N 10017y1 struts after 4 years and a knot on my head. I need to turn them around for the dampening. They were slightly shorter than original struts from 2011 build. I did have to remove a washer or two on each end as the fitting was thicker. I have noticed that the doors when closed, but unlatched sit out farther and we must pull in to ensure the center cam and pins engage properly. I have Sean's latch and painted door. > > -------- > Wayne G. ________________________________ Message 4 _____________________________________ Time: 12:47:41 PM PST US From: Rob Kermanj Subject: Re: RV10-List: AEROSPORT PRODUCTS NEW AEROVENTS Jeoff, Zack was going to email me pics for the vents but I have not received it na don=99t have his email address. Your website does not seem to have a picture uploaded yet. Thanks. Rob Kermanj > On Dec 2, 2015, at 7:13 AM, Flysrv10 wrote: > > Hi Jeff. > > Thanks again for providing great products four our planes. > > I want a pair in black at the introductory price. > > Call for my CC. > > Rob Kermanj > 772-418-1417 > > Sent from my iPhone > >> On Dec 1, 2015, at 5:34 PM, aerosport1 wrote: >> >> >> Aerosport Products would like to announce our new AEROVENTS. >> These are precision machined from aluminum and anodized either >> black or clear. The vents come with either the 2" scat tube nut or ring nut. >> They require a 2.125" hole and have a 1.20" outlet. These vents seal off >> when closed to 99%. >> >> These vents will retail for $115.00 plus shipping and are IN STOCK now by phone >> or on the web at the end of the week. Call us if you have any questions. >> >> We will be offering an introductory special (ORDER 2 or MORE) for $105.00 plus shipping the month of December 2015 Phone orders only. >> >> Geoff Combs Aerosport Products >> http://aerosportproducts.com >> >> -------- >> Geoff Combs >> RV-10 QB N829GW >> Flying 500 hrs >> 40033 >> >> >> >> >> Read this topic online here: >> >> http://forums.matronics.com/viewtopic.php?p=450720#450720 >> >> >> >> >> Attachments: >> >> http://forums.matronics.com//files/vent_6_181.jpg >> >> >> >> =========== =========== =========== =========== =========== >> >> >> ________________________________ Message 5 _____________________________________ Time: 02:17:48 PM PST US From: "Ben Westfall" Subject: RE: RV10-List: AEROSPORT PRODUCTS NEW AEROVENTS http://www.vansairforce.com/community/showthread.php?t=132140 -Ben From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Rob Kermanj Sent: Tuesday, December 8, 2015 12:44 PM Subject: Re: RV10-List: AEROSPORT PRODUCTS NEW AEROVENTS Jeoff, Zack was going to email me pics for the vents but I have not received it na don=99t have his email address. Your website does not seem to have a picture uploaded yet. Thanks. Rob Kermanj ________________________________ Message 6 _____________________________________ Time: 02:38:03 PM PST US From: Rob Kermanj Subject: Re: RV10-List: AEROSPORT PRODUCTS NEW AEROVENTS Thank you. Do not archive Rob Kermanj > On Dec 8, 2015, at 5:14 PM, Ben Westfall wrote: > > http://www.vansairforce.com/community/showthread.php?t=132140 > > -Ben > > > From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com ] On Behalf Of Rob Kermanj > Sent: Tuesday, December 8, 2015 12:44 PM > To: rv10-list@matronics.com > Subject: Re: RV10-List: AEROSPORT PRODUCTS NEW AEROVENTS > > Jeoff, > > Zack was going to email me pics for the vents but I have not received it na don=99t have his email address. > > Your website does not seem to have a picture uploaded yet. > > Thanks. > Rob Kermanj ________________________________ Message 7 _____________________________________ Time: 03:15:59 PM PST US From: "Geoff Combs" Subject: RE: RV10-List: AEROSPORT PRODUCTS NEW AEROVENTS Here is a picture of the new vents. Geoff Geoff Combs Aerosport 8090 Howe Industrial Parkway Canal, Winchester, Ohio 43110 614-834-5227 From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Rob Kermanj Sent: Tuesday, December 08, 2015 3:44 PM Subject: Re: RV10-List: AEROSPORT PRODUCTS NEW AEROVENTS Jeoff, Zack was going to email me pics for the vents but I have not received it na don=99t have his email address. Your website does not seem to have a picture uploaded yet. Thanks. Rob Kermanj On Dec 2, 2015, at 7:13 AM, Flysrv10 > wrote: Hi Jeff. Thanks again for providing great products four our planes. I want a pair in black at the introductory price. Call for my CC. Rob Kermanj 772-418-1417 Sent from my iPhone On Dec 1, 2015, at 5:34 PM, aerosport1 > wrote: > Aerosport Products would like to announce our new AEROVENTS. These are precision machined from aluminum and anodized either black or clear. The vents come with either the 2" scat tube nut or ring nut. They require a 2.125" hole and have a 1.20" outlet. These vents seal off when closed to 99%. These vents will retail for $115.00 plus shipping and are IN STOCK now by phone or on the web at the end of the week. Call us if you have any questions. We will be offering an introductory special (ORDER 2 or MORE) for $105.00 plus shipping the month of December 2015 Phone orders only. Geoff Combs Aerosport Products http://aerosportproducts.com -------- Geoff Combs RV-10 QB N829GW Flying 500 hrs 40033 Read this topic online here: http://forums.matronics.com/viewtopic.php?p=450720#450720 Attachments: http://forums.matronics.com//files/vent_6_181.jpg ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message rv10-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/RV10-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/rv10-list Browse Digests http://www.matronics.com/digest/rv10-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.