---------------------------------------------------------- RV10-List Digest Archive --- Total Messages Posted Thu 12/10/15: 10 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 06:47 AM - FAB Plans (Phillip Perry) 2. 06:58 AM - Re: FAB Plans (Bob Condrey) 3. 07:46 AM - Re: FAB Plans (Jae Chang) 4. 08:04 AM - Re: FAB Plans (Jesse Saint) 5. 08:25 AM - Re: FAB Plans (Miller John) 6. 08:30 AM - Re: FAB Plans (Carl Froehlich) 7. 08:53 AM - Re: FAB Plans (Phillip Perry) 8. 09:37 AM - Re: FAB Plans (Ron Mathia) 9. 02:14 PM - Re: FAB Plans (Geoff Combs) 10. 03:06 PM - Re: FAB Plans (Phillip Perry) ________________________________ Message 1 _____________________________________ Time: 06:47:32 AM PST US From: Phillip Perry Subject: RV10-List: FAB Plans Does anyone have a digital copy of the FAB plans? I've misplaced mine and have a couple of items to finish off before wrapping it up. Thanks, Phil Sent from my iPhone ________________________________ Message 2 _____________________________________ Time: 06:58:03 AM PST US Subject: Re: RV10-List: FAB Plans From: Bob Condrey Here you go! Bob On Thu, Dec 10, 2015 at 8:43 AM, Phillip Perry wrote: > > Does anyone have a digital copy of the FAB plans? I've misplaced mine and > have a couple of items to finish off before wrapping it up. > > Thanks, > Phil > > > Sent from my iPhone > > ________________________________ Message 3 _____________________________________ Time: 07:46:55 AM PST US Subject: Re: RV10-List: FAB Plans From: Jae Chang Might as well reinforce the bottom now to prevent the filter from wearing thru the fiberglass as well. -- #40533 RV-10 First flight 10/19/2011 Phase 1 Done 11/26/2011 do not archive On 12/10/2015 6:43 AM, Phillip Perry wrote: > > Does anyone have a digital copy of the FAB plans? I've misplaced mine and have a couple of items to finish off before wrapping it up. > > Thanks, > Phil > ________________________________ Message 4 _____________________________________ Time: 08:04:55 AM PST US From: Jesse Saint Subject: Re: RV10-List: FAB Plans Agree completely. Jesse Saint Saint Aviation, Inc. jesse@saintaviation.com C: 352-427-0285 F: 815-377-3694 Sent from my iPhone > On Dec 10, 2015, at 10:43 AM, Jae Chang wrote: > > > Might as well reinforce the bottom now to prevent the filter from wearing thru the fiberglass as well. > > -- > #40533 RV-10 > First flight 10/19/2011 > Phase 1 Done 11/26/2011 > do not archive > > >> On 12/10/2015 6:43 AM, Phillip Perry wrote: >> >> Does anyone have a digital copy of the FAB plans? I've misplaced mine and have a couple of items to finish off before wrapping it up. >> >> Thanks, >> Phil > > > > > ________________________________ Message 5 _____________________________________ Time: 08:25:27 AM PST US Subject: Re: RV10-List: FAB Plans From: Miller John I fabd a metal plate for the bottom then use 2 long AN3 bolts to hold it to the flange of the induction unit. Works very well!!! grumpy do not archive > On Dec 10, 2015, at 10:01 AM, Jesse Saint wrote: > > > Agree completely. > > Jesse Saint > Saint Aviation, Inc. > jesse@saintaviation.com > C: 352-427-0285 > F: 815-377-3694 > > Sent from my iPhone > >> On Dec 10, 2015, at 10:43 AM, Jae Chang wrote: >> >> >> Might as well reinforce the bottom now to prevent the filter from wearing thru the fiberglass as well. >> >> -- >> #40533 RV-10 >> First flight 10/19/2011 >> Phase 1 Done 11/26/2011 >> do not archive >> >> >>> On 12/10/2015 6:43 AM, Phillip Perry wrote: >>> >>> Does anyone have a digital copy of the FAB plans? I've misplaced mine and have a couple of items to finish off before wrapping it up. >>> >>> Thanks, >>> Phil >> >> >> >> >> > > > > > ________________________________ Message 6 _____________________________________ Time: 08:30:57 AM PST US From: "Carl Froehlich" Subject: RE: RV10-List: FAB Plans Yep - proseal in a piece of .032" aluminum and then sandwich the fiberglass between the alt air door and this piece of aluminum. Add four simple brackets to prevent the filter from becoming conical. Another option is to flip the top plate over an use the larger K&N E-1000 filter. Photos attached. Carl -----Original Message----- From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Jae Chang Sent: Thursday, December 10, 2015 10:43 AM Subject: Re: RV10-List: FAB Plans Might as well reinforce the bottom now to prevent the filter from wearing thru the fiberglass as well. -- #40533 RV-10 First flight 10/19/2011 Phase 1 Done 11/26/2011 do not archive On 12/10/2015 6:43 AM, Phillip Perry wrote: > > Does anyone have a digital copy of the FAB plans? I've misplaced mine and have a couple of items to finish off before wrapping it up. > > Thanks, > Phil > ________________________________ Message 7 _____________________________________ Time: 08:53:53 AM PST US From: Phillip Perry Subject: Re: RV10-List: FAB Plans Beat you to it.... Sent from my iPhone > On Dec 10, 2015, at 10:27 AM, Carl Froehlich w rote: > > Yep - proseal in a piece of .032" aluminum and then sandwich the fiberglas s > between the alt air door and this piece of aluminum. Add four simple > brackets to prevent the filter from becoming conical. Another option is t o > flip the top plate over an use the larger K&N E-1000 filter. Photos > attached. > > Carl > > -----Original Message----- > From: owner-rv10-list-server@matronics.com > [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Jae Chang > Sent: Thursday, December 10, 2015 10:43 AM > To: rv10-list@matronics.com > Subject: Re: RV10-List: FAB Plans > > > Might as well reinforce the bottom now to prevent the filter from wearing > thru the fiberglass as well. > > -- > #40533 RV-10 > First flight 10/19/2011 > Phase 1 Done 11/26/2011 > do not archive > > >> On 12/10/2015 6:43 AM, Phillip Perry wrote: >> >> Does anyone have a digital copy of the FAB plans? I've misplaced mine an d > have a couple of items to finish off before wrapping it up. >> >> Thanks, >> Phil > > > > > > > ________________________________ Message 8 _____________________________________ Time: 09:37:11 AM PST US From: "Ron Mathia" Subject: RE: RV10-List: FAB Plans Hi Phillip, Do you have any other picture for the installation of the FAB? I'm not sure, from the instructions, how to install the foam block to the cowling. Regards, Ron -----Original Message----- From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Phillip Perry Sent: Thursday, December 10, 2015 11:51 AM Subject: Re: RV10-List: FAB Plans Beat you to it.... ________________________________ Message 9 _____________________________________ Time: 02:14:25 PM PST US From: "Geoff Combs" Subject: RE: RV10-List: FAB Plans Attached is a full scale PDF of the aluminum plate I glued in the bottom as Phil and others did. Works great. Glued in with Tank seal/ Proseal. Geoff Geoff Combs -----Original Message----- From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Phillip Perry Sent: Thursday, December 10, 2015 11:51 AM Subject: Re: RV10-List: FAB Plans Beat you to it.... ________________________________ Message 10 ____________________________________ Time: 03:06:45 PM PST US From: Phillip Perry Subject: Re: RV10-List: FAB Plans Hi Ron, I checked and don't have any photos of my foam block exercise. However if you google RV-10 Filtered Air Box, you will find a number of hits. The foam block is shaped somewhat like a brick and is oriented so you're tunneling through the fat side of the brick; if you can visualize that. You just have to shape the outside corners enough to wedge it into the nose of snorkel. I used epoxy to hold it into position, but wish I had used something more forgiving. I have a couple of clumps of epoxy way down there that I'll probably never remove. Using an adhesive would make it cleaner and just as easy. I plugged the intake of the induction system with a rag to avoid the foam shavings from finding its way downstream. I also used a vacuum to suck out foam shavings as I was digging. Glassing it was easy. I removed some of the gel coat so I could get a good bond, then pre-loaded my fabric with epoxy and stuck it in position. I didn't need a balloon to hold it like some of the photos show. I just checked in on it every 30 minutes or so to make sure it wasn't slumping and to adjust it if needed. It looked really good at the end of everything. The worst part was getting the foam block shaped enough to get it fit the cowling and then digging it back out. (Though the adhesive would make that much easier.) Phil Sent from my iPhone > On Dec 10, 2015, at 11:33 AM, Ron Mathia wrote: > > > Hi Phillip, > > Do you have any other picture for the installation of the FAB? > I'm not sure, from the instructions, how to install the foam block to the > cowling. > > Regards, Ron > > -----Original Message----- > From: owner-rv10-list-server@matronics.com > [mailto:owner-rv10-list-server@matronics.com] On Behalf Of Phillip Perry > Sent: Thursday, December 10, 2015 11:51 AM > To: rv10-list@matronics.com > Subject: Re: RV10-List: FAB Plans > > Beat you to it.... > > > > > > ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message rv10-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/RV10-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/rv10-list Browse Digests http://www.matronics.com/digest/rv10-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.