Today's Message Index:
----------------------
1. 06:37 PM - Control Stick Slop - Bushings (Phillip Perry)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Control Stick Slop - Bushings |
I've managed to run into the control stick slop that a handful of other
people have reported. It looks like the bushing I have is undersized or
the bell crank hole is over sized. I haven't dug far enough into to
determine which it is, but I'm betting it's the welded part (IE: Bell
Crank).
I've thought about building a custom bushing, but thought I'd order one
more set from Vans and be extremely careful in prepping it, to remove as
much slop as possible before going any further down the path.
Looking on Vans site this evening, I can't find that bushing anywhere for
purchase. It's labeled as BUSHING 065 x .375 x 2.313.
Have any of you successfully ordered as 2nd set from Vans? Just wondering
it it could be hiding under a different stock number.
Thanks
Phil
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|