Today's Message Index:
----------------------
1. 01:53 AM - Harness Strap & Headset Bracket (Patrick Pulis)
2. 05:00 AM - Re: Harness Strap & Headset Bracket (bill.peyton)
3. 05:22 AM - Re: Harness Strap & Headset Bracket (Bill Watson)
4. 06:43 AM - Re: Harness Strap & Headset Bracket (Carl Froehlich)
5. 06:44 AM - Re: FS: Slick 6393 Mag and Mag Drive (Barry)
6. 12:03 PM - Re: Re: Harness Strap & Headset Bracket (Patrick Pulis)
7. 12:05 PM - Re: Harness Strap & Headset Bracket (Patrick Pulis)
8. 12:44 PM - Re: Harness Strap & Headset Bracket (David Saylor)
9. 01:01 PM - Re: Harness Strap & Headset Bracket (Carl Froehlich)
10. 02:04 PM - Re: Re: Harness Strap & Headset Bracket (Don McDonald)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Harness Strap & Headset Bracket |
Could anyone please direct me to where I could purchase those brackets which are
attached to the overhead console, from which I can hang harnesses and headsets
from please?
Your assistance would again be greatly appreciated please.
Warm regards
Patrick
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Harness Strap & Headset Bracket |
http://www.planeinnovations.com/product-category/brackets/
--------
Bill
WA0SYV
Aviation Partners, LLC
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=452757#452757
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Harness Strap & Headset Bracket |
**warning** completely unsolicited input follows:
Com'on builder, you can make your own belt hangers. Try these
<http://www.mykitlog.com/users/display_log.php?user=MauleDriver&project=224&category=7984&log=152315&row=15>
- they look good and work even better.
Someone suggested hanging the front seat headsets on the side underneath
the panel. Out of sight and sun yet easily accessible if you get them
before belting in. I made a hook with a piece of aluminum tubing and
blind riveted to that first vertical behind the firewall. And when
flying solo, no action required for the unused headset.
Bill "providing information you already had but discarded" Watson
On 2/11/2016 4:49 AM, Patrick Pulis wrote:
>
> Could anyone please direct me to where I could purchase those brackets which
are attached to the overhead console, from which I can hang harnesses and headsets
from please?
>
> Your assistance would again be greatly appreciated please.
>
> Warm regards
>
> Patrick
>
>
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
Message 4
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Harness Strap & Headset Bracket |
Headsets holders are above and on either side of the tunnel on a simple
single piece of =BD=94 aluminum tubing attached under the panel. The
ends of
the tubing have a few inches of plastic hose to protect the headsets.
Harness strap holders are Z brackets made from .040=94 aluminum and
attached
to the inboard door hinge screws on each side.
Carl
From: owner-rv10-list-server@matronics.com
[mailto:owner-rv10-list-server@matronics.com] On Behalf Of Bill Watson
Sent: Thursday, February 11, 2016 8:19 AM
Subject: Re: RV10-List: Harness Strap & Headset Bracket
**warning** completely unsolicited input follows:
Com'on builder, you can make your own belt hangers. Try these
<http://www.mykitlog.com/users/display_log.php?user=MauleDriver&project
=224&
category=7984&log=152315&row=15> - they look good and work even
better.
Someone suggested hanging the front seat headsets on the side underneath
the
panel. Out of sight and sun yet easily accessible if you get them
before
belting in. I made a hook with a piece of aluminum tubing and blind
riveted
to that first vertical behind the firewall. And when flying solo, no
action
required for the unused headset.
Bill "providing information you already had but discarded" Watson
On 2/11/2016 4:49 AM, Patrick Pulis wrote:
<mailto:rv10free2fly@yahoo.com.au> <rv10free2fly@yahoo.com.au>
Could anyone please direct me to where I could purchase those brackets
which
are attached to the overhead console, from which I can hang harnesses
and
headsets from please?
Your assistance would again be greatly appreciated please.
Warm regards
Patrick
This email has been sent from a virus-free computer protected by Avast.
<https://www.avast.com/sig-email> www.avast.com
Message 5
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: FS: Slick 6393 Mag and Mag Drive |
Mag is Sold
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=452761#452761
Message 6
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Harness Strap & Headset Bracket |
Perfect, many thanks Bill.
Warm regards
Patrick
> On 11 Feb 2016, at 23:26, bill.peyton <peyton.b@sbcglobal.net> wrote:
>
>
> http://www.planeinnovations.com/product-category/brackets/
>
> --------
> Bill
> WA0SYV
> Aviation Partners, LLC
>
>
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=452757#452757
>
>
>
>
>
>
>
>
>
>
Message 7
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Harness Strap & Headset Bracket |
Any pictures please Carl?
Warm regards
Patrick
> On 12 Feb 2016, at 01:10, Carl Froehlich <carl.froehlich@verizon.net> wrot
e:
>
> Headsets holders are above and on either side of the tunnel on a simple si
ngle piece of =C2=BD=9D aluminum tubing attached under the panel. The
ends of the tubing have a few inches of plastic hose to protect the headset
s.
>
> Harness strap holders are Z brackets made from .040=9D aluminum and a
ttached to the inboard door hinge screws on each side.
>
> Carl
>
> From: owner-rv10-list-server@matronics.com [mailto:owner-rv10-list-server@
matronics.com] On Behalf Of Bill Watson
> Sent: Thursday, February 11, 2016 8:19 AM
> To: rv10-list@matronics.com
> Subject: Re: RV10-List: Harness Strap & Headset Bracket
>
> **warning** completely unsolicited input follows:
>
> Com'on builder, you can make your own belt hangers. Try these - they look
good and work even better.
>
> Someone suggested hanging the front seat headsets on the side underneath t
he panel. Out of sight and sun yet easily accessible if you get them before
belting in. I made a hook with a piece of aluminum tubing and blind riveted
to that first vertical behind the firewall. And when flying solo, no actio
n required for the unused headset.
>
> Bill "providing information you already had but discarded" Watson
>
>
> On 2/11/2016 4:49 AM, Patrick Pulis wrote:
>
> Could anyone please direct me to where I could purchase those brackets whi
ch are attached to the overhead console, from which I can hang harnesses and
headsets from please?
>
> Your assistance would again be greatly appreciated please.
>
> Warm regards
>
> Patrick
>
>
>
>
>
>
>
> This email has been sent from a virus-free computer protected by Avast.
> www.avast.com
>
Message 8
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Harness Strap & Headset Bracket |
Here's another version.
--Dave
On Thursday, February 11, 2016, Patrick Pulis <rv10free2fly@yahoo.com.au>
wrote:
> Any pictures please Carl?
>
> Warm regards
>
> Patrick
>
> On 12 Feb 2016, at 01:10, Carl Froehlich <carl.froehlich@verizon.net
> <javascript:_e(%7B%7D,'cvml','carl.froehlich@verizon.net');>> wrote:
>
> Headsets holders are above and on either side of the tunnel on a simple
> single piece of =C2=BD=9D aluminum tubing attached under the panel.
The ends of
> the tubing have a few inches of plastic hose to protect the headsets.
>
>
> Harness strap holders are Z brackets made from .040=9D aluminum and
attached
> to the inboard door hinge screws on each side.
>
>
> Carl
>
>
> *From:* owner-rv10-list-server@matronics.com
> <javascript:_e(%7B%7D,'cvml','owner-rv10-list-server@matronics.com');> [
> mailto:owner-rv10-list-server@matronics.com
> <javascript:_e(%7B%7D,'cvml','owner-rv10-list-server@matronics.com');>] *
On
> Behalf Of *Bill Watson
> *Sent:* Thursday, February 11, 2016 8:19 AM
> *To:* rv10-list@matronics.com
> <javascript:_e(%7B%7D,'cvml','rv10-list@matronics.com');>
> *Subject:* Re: RV10-List: Harness Strap & Headset Bracket
>
>
> **warning** completely unsolicited input follows:
>
> Com'on builder, you can make your own belt hangers. Try these
> <http://www.mykitlog.com/users/display_log.php?user=MauleDriver&project
=224&category=7984&log=152315&row=15>
> - they look good and work even better.
>
> Someone suggested hanging the front seat headsets on the side underneath
> the panel. Out of sight and sun yet easily accessible if you get them
> before belting in. I made a hook with a piece of aluminum tubing and blin
d
> riveted to that first vertical behind the firewall. And when flying solo
,
> no action required for the unused headset.
>
> Bill "providing information you already had but discarded" Watson
>
>
> On 2/11/2016 4:49 AM, Patrick Pulis wrote:
>
> <javascript:_e(%7B%7D,'cvml','rv10free2fly@yahoo.com.au');>
>
>
> Could anyone please direct me to where I could purchase those brackets wh
ich are attached to the overhead console, from which I can hang harnesses a
nd headsets from please?
>
>
> Your assistance would again be greatly appreciated please.
>
>
> Warm regards
>
>
> Patrick
>
>
> This email has been sent from a virus-free computer protected by Avast.
> www.avast.com <https://www.avast.com/sig-email>
>
>
Message 9
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Harness Strap & Headset Bracket |
Here you go.
Carl
From: owner-rv10-list-server@matronics.com
[mailto:owner-rv10-list-server@matronics.com] On Behalf Of Patrick Pulis
Sent: Thursday, February 11, 2016 3:02 PM
Subject: Re: RV10-List: Harness Strap & Headset Bracket
Any pictures please Carl?
Warm regards
Patrick
On 12 Feb 2016, at 01:10, Carl Froehlich <carl.froehlich@verizon.net>
wrote:
Headsets holders are above and on either side of the tunnel on a simple
single piece of =C2=BD=9D aluminum tubing attached under the
panel. The ends of the tubing have a few inches of plastic hose to
protect the headsets.
Harness strap holders are Z brackets made from .040=9D aluminum
and attached to the inboard door hinge screws on each side.
Carl
From: owner-rv10-list-server@matronics.com
[mailto:owner-rv10-list-server@matronics.com] On Behalf Of Bill Watson
Sent: Thursday, February 11, 2016 8:19 AM
Subject: Re: RV10-List: Harness Strap & Headset Bracket
**warning** completely unsolicited input follows:
Com'on builder, you can make your own belt hangers. Try these
<http://www.mykitlog.com/users/display_log.php?user=MauleDriver&project
=224&category=7984&log=152315&row=15> - they look good and work
even better.
Someone suggested hanging the front seat headsets on the side underneath
the panel. Out of sight and sun yet easily accessible if you get them
before belting in. I made a hook with a piece of aluminum tubing and
blind riveted to that first vertical behind the firewall. And when
flying solo, no action required for the unused headset.
Bill "providing information you already had but discarded" Watson
On 2/11/2016 4:49 AM, Patrick Pulis wrote:
<mailto:rv10free2fly@yahoo.com.au> <rv10free2fly@yahoo.com.au>
Could anyone please direct me to where I could purchase those brackets
which are attached to the overhead console, from which I can hang
harnesses and headsets from please?
Your assistance would again be greatly appreciated please.
Warm regards
Patrick
This email has been sent from a virus-free computer protected by Avast.
<https://www.avast.com/sig-email> www.avast.com
Message 10
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Harness Strap & Headset Bracket |
Actually, I made the parts originally and sold them myself.=C2- Then was
contacted by (I think it was Paul) from Plane Innovations, and he bought al
l I had made.=C2- But I think Paul was killed in a plane crash several ye
ars back.=C2- I no longer make them because I've moved to Texas.=C2- Th
at's all I know.Don McDonald
From: Patrick Pulis <rv10free2fly@yahoo.com.au>
To: rv10-list@matronics.com
Sent: Thursday, February 11, 2016 1:59 PM
Subject: Re: RV10-List: Re: Harness Strap & Headset Bracket
Perfect, many thanks Bill.
Warm regards
Patrick
> On 11 Feb 2016, at 23:26, bill.peyton <peyton.b@sbcglobal.net> wrote:
>
>
> http://www.planeinnovations.com/product-category/brackets/
>
> --------
> Bill
> WA0SYV
> Aviation Partners, LLC
>
>
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=452757#452757
>
>
>
>
>
>
>
>
>
>
=C2- =C2- =C2- =C2- =C2- -Matt Dralle, List Admin.
S -
-
=C2- =C2- =C2- =C2- =C2- -Matt Dralle, List Admin.
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|