Today's Message Index:
----------------------
1. 06:26 AM - Re: Re: Service Bulletin (Tim Olson)
2. 06:41 AM - Re: Re: Service Bulletin (Kelly McMullen)
3. 12:31 PM - Re: Navworx upgrade new wires for ghosting (hotwheels)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Service Bulletin |
Kelly, thanks for the recommendation. The photos
on that Amazon link looked good, so I ordered one.
It'll be a bit before I get a chance to use it. Too
many irons in the fire. But, it looks like it'll
be just fine.
Tim
do not archive
On 5/8/2016 9:11 PM, Kelly McMullen wrote:
>
> I bought one of these:
> http://www.amazon.com/AbleScope-VA-400-Borescope-Endoscope-Articulating/dp/B00GY7C9ZW?ie=UTF8&psc=1&redirect=true&ref_=oh_aui_detailpage_o04_s00
>
>
> Hooked up to my laptop I can take photos or video. The articulating head
> is the primary attraction. Insert in cylinder, bend head 180 degrees to
> look at valves. Bend 90 to look at cylinder walls.
>
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Service Bulletin |
I got the recommendation from a review Aviation Consumer did some months
ago. I figured the price wasn't that different from the fixed head
scopes Harbor Freight has, and I always worried about mirrors getting
dropped in a cylinder.
All scopes I have seen take some practice to figure what distance from
the object works best with the auto focus. Generally you do better if
you can get the head as far away as possible, e.g. piston at bottom of
stroke. But it does work reasonably up close, and I have been able to
examine at least part of valve seats and valve heads to look for any
problems.
It supposedly works with tablets, but I have heard issues with getting
enough power for the LEDs and cameras from such devices. I just use a
Toshiba laptop that was retired from front line use 6 months ago.
I downloaded the software rather than use the older version on the
supplied mini-CD.
On 5/9/2016 6:23 AM, Tim Olson wrote:
>
> Kelly, thanks for the recommendation. The photos
> on that Amazon link looked good, so I ordered one.
> It'll be a bit before I get a chance to use it. Too
> many irons in the fire. But, it looks like it'll
> be just fine.
> Tim
>
> do not archive
>
> On 5/8/2016 9:11 PM, Kelly McMullen wrote:
>>
>> I bought one of these:
>> http://www.amazon.com/AbleScope-VA-400-Borescope-Endoscope-Articulating/dp/B00GY7C9ZW?ie=UTF8&psc=1&redirect=true&ref_=oh_aui_detailpage_o04_s00
>>
>>
>>
>> Hooked up to my laptop I can take photos or video. The articulating head
>> is the primary attraction. Insert in cylinder, bend head 180 degrees to
>> look at valves. Bend 90 to look at cylinder walls.
>>
>
>
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Navworx upgrade new wires for ghosting |
I keep a spreadsheet of all device / cable pinouts. There's a note on ADS600-B
Pin 35 description / notes state "Transponder Suppression OUT (ARINC does this)".
For my setup, pin 35 is not connected and ARINC connection is active to G330. No
ghosting issues after latest FW v4 and hardware rework.
Regards,
Jay
N433RV flying
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=456029#456029
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|