---------------------------------------------------------- RV10-List Digest Archive --- Total Messages Posted Sun 08/14/16: 3 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 06:58 PM - Trim Cable Nut (mhealydds) 2. 07:15 PM - Re: Trim Cable Nut (David Maib) 3. 07:25 PM - Re: Trim Cable Nut (Jesse Saint) ________________________________ Message 1 _____________________________________ Time: 06:58:25 PM PST US Subject: RV10-List: Trim Cable Nut From: "mhealydds" This may seem like a dumb question.....how did you get the elevator trim cable nut that is riveted to elevator cover plate threaded onto elevator trim control cable. I don't seem to have enough room to twist cover plate with nut around trim cable without elevator in the way. Thanks.....Matt (getting excited as end is in sight!) Read this topic online here: http://forums.matronics.com/viewtopic.php?p=459501#459501 ________________________________ Message 2 _____________________________________ Time: 07:15:13 PM PST US From: David Maib Subject: Re: RV10-List: Trim Cable Nut I installed #4 screws and nuts in lieu of riveting. I've been glad several times over the past 8 years. David Maib > On Aug 14, 2016, at 9:56 PM, mhealydds wrote: > > > This may seem like a dumb question.....how did you get the elevator trim cable nut that is riveted to elevator cover plate threaded onto elevator trim control cable. I don't seem to have enough room to twist cover plate with nut around trim cable without elevator in the way. > > Thanks.....Matt > > (getting excited as end is in sight!) > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=459501#459501 > > > > > > > > > > ________________________________ Message 3 _____________________________________ Time: 07:25:39 PM PST US From: Jesse Saint Subject: Re: RV10-List: Trim Cable Nut If you unscrew the screws holding the trim system onto the HS deck, you can pull out on one trim cable enough to bend it out of the hole in the elevator and screw the nut and plate on. Then do the same on the other side. Jesse Saint Saint Aviation, Inc. jesse@saintaviation.com C: 352-427-0285 F: 815-377-3694 Sent from my iPhone > On Aug 14, 2016, at 10:14 PM, David Maib wrote: > > > I installed #4 screws and nuts in lieu of riveting. I've been glad several times over the past 8 years. > > David Maib > > >> On Aug 14, 2016, at 9:56 PM, mhealydds wrote: >> >> >> This may seem like a dumb question.....how did you get the elevator trim cable nut that is riveted to elevator cover plate threaded onto elevator trim control cable. I don't seem to have enough room to twist cover plate with nut around trim cable without elevator in the way. >> >> Thanks.....Matt >> >> (getting excited as end is in sight!) >> >> >> >> >> Read this topic online here: >> >> http://forums.matronics.com/viewtopic.php?p=459501#459501 > > > > > ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message rv10-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/RV10-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/rv10-list Browse Digests http://www.matronics.com/digest/rv10-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.