---------------------------------------------------------- RV10-List Digest Archive --- Total Messages Posted Sun 02/12/17: 5 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 05:31 AM - Re: W1002 Weldment Query (bill.peyton) 2. 07:30 AM - Re: W1002 Weldment Query (kearney) 3. 08:05 AM - Re: Re: W1002 Weldment Query (Phillip Perry) 4. 10:07 AM - Re: Re: W1002 Weldment Query (Jesse Saint) 5. 12:16 PM - Re: Re: W1002 Weldment Query (Kelly McMullen) ________________________________ Message 1 _____________________________________ Time: 05:31:35 AM PST US Subject: RV10-List: Re: W1002 Weldment Query From: "bill.peyton" I too had issues with alignment. I used a rope and Polly to stretch the mount. I was able to get all holes lined up. I started with the top, which lined up without much effort for me, then the bottom two outside holes which required a lot of stretching. The hard part was inserting the bolts after having to remove the mount again. -------- Bill WA0SYV Aviation Partners, LLC Read this topic online here: http://forums.matronics.com/viewtopic.php?p=466044#466044 ________________________________ Message 2 _____________________________________ Time: 07:30:14 AM PST US Subject: RV10-List: Re: W1002 Weldment Query From: "kearney" Hmmm This sounds like the problem I had. Unfortunately, when I used clamps and ropes etc there was a significant flex in the firewall due to the weldments. To me it seems like there is a design issue here. Cheers Les Read this topic online here: http://forums.matronics.com/viewtopic.php?p=466046#466046 ________________________________ Message 3 _____________________________________ Time: 08:05:32 AM PST US From: Phillip Perry Subject: Re: RV10-List: Re: W1002 Weldment Query All these problems makes me want to go back and re-check mine. I didn't have any issues. Sent from my iPhone > On Feb 12, 2017, at 9:17 AM, kearney wrote: > > > Hmmm > > This sounds like the problem I had. Unfortunately, when I used clamps and ropes etc there was a significant flex in the firewall due to the weldments. To me it seems like there is a design issue here. > > Cheers > > Les > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=466046#466046 > > > > > > > > > ________________________________ Message 4 _____________________________________ Time: 10:07:03 AM PST US From: Jesse Saint Subject: Re: RV10-List: Re: W1002 Weldment Query The W1002 is not the engine mount. He's talking about the part that it bolts to aft of the firewall. Jesse Saint Saint Aviation, Inc. jesse@saintaviation.com C: 352-427-0285 F: 815-377-3694 Sent from my iPhone > On Feb 12, 2017, at 10:56 AM, Phillip Perry wrote: > > > All these problems makes me want to go back and re-check mine. I didn't have any issues. > > Sent from my iPhone > >> On Feb 12, 2017, at 9:17 AM, kearney wrote: >> >> >> Hmmm >> >> This sounds like the problem I had. Unfortunately, when I used clamps and ropes etc there was a significant flex in the firewall due to the weldments. To me it seems like there is a design issue here. >> >> Cheers >> >> Les >> >> >> >> >> Read this topic online here: >> >> http://forums.matronics.com/viewtopic.php?p=466046#466046 >> >> >> >> >> >> >> >> >> > > > > ________________________________ Message 5 _____________________________________ Time: 12:16:22 PM PST US From: Kelly McMullen Subject: Re: RV10-List: Re: W1002 Weldment Query The area being discussed was built for you in your quick build. -sent from the I-droid implanted in my forearm On Sun, Feb 12, 2017 at 8:56 AM, Phillip Perry wrote: > > All these problems makes me want to go back and re-check mine. I didn't > have any issues. > > Sent from my iPhone > > > On Feb 12, 2017, at 9:17 AM, kearney wrote: > > > > > > Hmmm > > > > This sounds like the problem I had. Unfortunately, when I used clamps > and ropes etc there was a significant flex in the firewall due to the > weldments. To me it seems like there is a design issue here. > > > > Cheers > > > > Les > > > > > > > > > > Read this topic online here: > > > > http://forums.matronics.com/viewtopic.php?p=466046#466046 > > > > > > > > > > > > > > > > > > > > ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message rv10-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/RV10-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/rv10-list Browse Digests http://www.matronics.com/digest/rv10-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.