Today's Message Index:
----------------------
1. 08:08 AM - Break model. (Rob Kermanj)
2. 08:29 AM - Re: Break model. (Tim Olson)
3. 08:30 AM - Re: Break model. (Home)
4. 08:52 AM - Re: Break model. (Rob Kermanj)
5. 09:01 AM - Re: Break model. (John Miller)
6. 10:16 AM - Re: Break model. (Rob Kermanj)
7. 12:39 PM - Re: Cleveland Brake parts. (Kelly McMullen)
8. 05:59 PM - Re: Vinyl lettering (rvdave)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Guys,
Need help. Break failure at run up area. Need the wheel and caliper model to get
o ring and pads. Thanks a bunch.
Sent from my iPhone
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Break model. |
Hi Rob,
If you are using stock Cleveland, then this is it:
Brake Assembly 30-59E
Brake Pads 66-112
Rivets 105-2
Disc part number RA164-07500 For Rapco version
Wheel Assembly is 40-59A
For caliper o-rings if you can go Viton, do it:
The Viton o-rings are M83248/1-224 V-75
Hope that helps you out!
Tim
On 2/24/2017 10:07 AM, Rob Kermanj wrote:
>
> Guys,
>
> Need help. Break failure at run up area. Need the wheel and caliper model to
get o ring and pads. Thanks a bunch.
>
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Break model. |
Not sure if this is what you are looking for.... had this noted in my POH.
Main Brakes: 30-59E assy Torque 75-80 in-lb dry Linings: Cleveland 66-112 Rivets:
105-2 Disc: 164-07500 Fluid: Aeroshell Mil-H-5606G
Sent from my iPad
> On Feb 24, 2017, at 11:07 AM, Rob Kermanj <flysrv10@gmail.com> wrote:
>
>
> Guys,
>
> Need help. Break failure at run up area. Need the wheel and caliper model to
get o ring and pads. Thanks a bunch.
>
> Sent from my iPhone
>
>
>
Message 4
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Break model. |
Thank you! On my way to ABQ to pick up the parts.
Sent from my iPhone
> On Feb 24, 2017, at 9:27 AM, Home <bdgillespie215@gmail.com> wrote:
>
>
> Not sure if this is what you are looking for.... had this noted in my POH.
>
> Main Brakes: 30-59E assy Torque 75-80 in-lb dry Linings: Cleveland 66-112 Rivets:
105-2 Disc: 164-07500 Fluid: Aeroshell Mil-H-5606G
>
> Sent from my iPad
>
>> On Feb 24, 2017, at 11:07 AM, Rob Kermanj <flysrv10@gmail.com> wrote:
>>
>>
>> Guys,
>>
>> Need help. Break failure at run up area. Need the wheel and caliper model to
get o ring and pads. Thanks a bunch.
>>
>> Sent from my iPhone
>>
>>
>>
>
>
>
>
Message 5
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Break model. |
Hope this helps!
grumpy
Cleveland, Wheel 40-59A; Disc 164-07500
Grease seals: 153-00300 outer; 153-00400 inner. Snap ring 155-00100.
Lining 066-11200. Rivet 105-00200. Dust Sheld 157-00900; Wheel bolts
AN5-34A; MS21044-N5 nuts
Timken Bearing LM274949-2-629, cotter pin AN 380-3-8. Torque halves
150in lb dry
> On Feb 24, 2017, at 10:52 AM, Rob Kermanj <flysrv10@gmail.com> wrote:
>
>
> Thank you! On my way to ABQ to pick up the parts.
>
> Sent from my iPhone
>
>> On Feb 24, 2017, at 9:27 AM, Home <bdgillespie215@gmail.com> wrote:
>>
>>
>> Not sure if this is what you are looking for.... had this noted in my
POH.
>>
>> Main Brakes: 30-59E assy Torque 75-80 in-lb dry =EF=82=B7 Linings:
Cleveland 66-112 =EF=82=B7 Rivets: 105-2 Disc: 164-07500 =EF=82=B7
Fluid: Aeroshell Mil-H-5606G
>>
>> Sent from my iPad
>>
>>> On Feb 24, 2017, at 11:07 AM, Rob Kermanj <flysrv10@gmail.com>
wrote:
>>>
>>>
>>> Guys,
>>>
>>> Need help. Break failure at run up area. Need the wheel and caliper
model to get o ring and pads. Thanks a bunch.
>>>
>>> Sent from my iPhone
>>>
>>>
>>>
>>
>>
>>
>>
>
>
>
>
Message 6
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Break model. |
Thanks guys for the quick help. On my way to abq to get the parts.
Sent from my iPhone
> On Feb 24, 2017, at 10:01 AM, John Miller <gengrumpy@aol.com> wrote:
>
> Hope this helps!
>
> grumpy
> Cleveland, Wheel 40-59A; Disc 164-07500
>
> Grease seals: 153-00300 outer; 153-00400 inner. Snap ring 155-00100. Linin
g 066-11200. Rivet 105-00200. Dust Sheld 157-00900; Wheel bolts AN5-34A; M
S21044-N5 nuts
>
> Timken Bearing LM274949-2-629, cotter pin AN 380-3-8. Torque halves 150in l
b dry
>
>
>> On Feb 24, 2017, at 10:52 AM, Rob Kermanj <flysrv10@gmail.com> wrote:
>>
>>
>> Thank you! On my way to ABQ to pick up the parts.
>>
>> Sent from my iPhone
>>
>>> On Feb 24, 2017, at 9:27 AM, Home <bdgillespie215@gmail.com> wrote:
>>>
>>>
>>> Not sure if this is what you are looking for.... had this noted in my PO
H.
>>>
>>> Main Brakes: 30-59E assy Torque 75-80 in-lb dry =EF=82=B7 Linings: Cleve
land 66-112 =EF=82=B7 Rivets: 105-2 Disc: 164-07500 =EF=82=B7 Fluid: A
eroshell Mil-H-5606G
>>>
>>> Sent from my iPad
>>>
>>>> On Feb 24, 2017, at 11:07 AM, Rob Kermanj <flysrv10@gmail.com> wrote:
>>>>
>>>>
>>>> Guys,
>>>>
>>>> Need help. Break failure at run up area. Need the wheel and caliper mo
del to get o ring and pads. Thanks a bunch.
>>>>
>>>> Sent from my iPhone
>>>>
>>>>
>>>>
>>>
>>>
>>>
>>>
>>
==========================
=========
==========================
=========
==========================
=========
==========================
=========
==========================
=========
>>
>>
>>
>
Message 7
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Cleveland Brake parts. |
Just revising the subject line to give a break to anyone searching the
archives for Cleveland brake information.
-sent from the I-droid implanted in my forearm
On Fri, Feb 24, 2017 at 11:15 AM, Rob Kermanj <flysrv10@gmail.com> wrote:
> Thanks guys for the quick help. On my way to abq to get the parts.
>
> Sent from my iPhone
>
> On Feb 24, 2017, at 10:01 AM, John Miller <gengrumpy@aol.com> wrote:
>
> Hope this helps!
>
> grumpy
> Cleveland, Wheel 40-59A; Disc 164-07500
> Grease seals: 153-00300 outer; 153-00400 inner. Snap ring 155-00100.
> Lining 066-11200. Rivet 105-00200. Dust Shield 157-00900; Wheel bolts
> AN5-34A; MS21044-N5 nuts
>
> Timken Bearing LM274949-2-629, cotter pin AN 380-3-8. Torque halves 150in
> lb dry
>
> On Feb 24, 2017, at 10:52 AM, Rob Kermanj <flysrv10@gmail.com> wrote:
>
>
> Thank you! On my way to ABQ to pick up the parts.
>
> Sent from my iPhone
>
> On Feb 24, 2017, at 9:27 AM, Home <bdgillespie215@gmail.com> wrote:
>
>
> Not sure if this is what you are looking for.... had this noted in my POH
.
>
> Main Brakes: 30-59E assy Torque 75-80 in-lb dry =EF=82=B7 Linings: Clevel
and
> 66-112 =EF=82=B7 Rivets: 105-2 Disc: 164-07500 =EF=82=B7 Fluid: Aer
oshell Mil-H-5606G
>
> Sent from my iPad
>
> On Feb 24, 2017, at 11:07 AM, Rob Kermanj <flysrv10@gmail.com> wrote:
>
>
> Guys,
>
> Need help. Break failure at run up area. Need the wheel and caliper mode
l
> to get o ring and pads. Thanks a bunch.
>
> Sent from my iPhone
>
>
> http://www.matronics.com/Navi==============
================
> ========================
=======================nbsp;
- NEW
> MATRONICS LIST WI==================
=========
> ========================s
p;  "htt
> p://www.matronics.com/contribution" class="">http://www.matronics.
> com/=======================
=====================
>
>
Message 8
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Vinyl lettering |
I think I found one that I'm going to work with that has a pretty nice interactive
website with a lot of flexibility and a reasonably priced product .
Doityourselflettering.com , we'll see how it works out.
--------
Dave Ford
RV6 for sale
RV10 building
Cadillac, MI
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=466616#466616
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|