---------------------------------------------------------- RV10-List Digest Archive --- Total Messages Posted Wed 05/23/18: 8 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 01:06 AM - Re: Jet Shades | Removable Tinted Panels Block UV/Glare/Heat While Flying! (Alan Mekler MD) 2. 06:26 AM - Re: Re: Sun Visor (Bill Boyd) 3. 06:57 AM - Re: Re: Sun Visor (parish) 4. 08:18 AM - Re: Sun Visor (Greg McFarlane) 5. 10:58 AM - Re: Re: Sun Visor (Vernon Franklin) 6. 12:40 PM - Wing attach hardware (Gordon Anderson) 7. 01:37 PM - SkyBeacon ADS-B Out Solution (Albert) 8. 01:47 PM - Re: SkyBeacon ADS-B Out Solution (Tim Olson) ________________________________ Message 1 _____________________________________ Time: 01:06:57 AM PST US From: Alan Mekler MD Subject: Re: RV10-List: Jet Shades | Removable Tinted Panels Block UV/Glare/Heat While Flying! At sun n fun templates were made from his 10 Alan Sent from my iPhone > On May 22, 2018, at 9:09 PM, John Miller wrote: > > > How did he order for a 10? Their website does not mention ones for a 10. > > Grumpy > >> On May 22, 2018, at 3:42 PM, Alan Mekler MD wrote: >> >> >> My friend has ordered these for his RV 10 theyre pricey will have to report how well they work >> https://jet-shades.com/ >> >> >> Sent from my iPhone >> >> >> >> > > > > > ________________________________ Message 2 _____________________________________ Time: 06:26:30 AM PST US From: Bill Boyd Subject: Re: RV10-List: Re: Sun Visor Raise your hand if you'd like to see pics of Bob's DIY visors... :-) On Tue, May 22, 2018 at 4:14 PM, Bob Turner wrote: > > Okay guys. If you place any value on =98looks=99 just skip th is post. > I=99ll pay airplane prices for airplane parts, but a sun visor? I t ook a > piece of 2x4, drilled a hole thru it, cut it lengthwise so now I had two > semi-circular holes, put it together with some bolts and wingnuts on the > center post. Tension on the bolts adjusted so it slides up and down on th e > post with some force applied, but otherwise stays put. I think I put some > felt or velco inside the hole, not sure. Two dowl rods extend out > horizontally on each side. Attached to each rod is a green plastic visor > from ACS with its suction cup removed ($15 iirc). These have pretty good > optical quality. I can move them up/down, or side to side a bit, but no > side window coverage. Rotate up and out of the way when not in use. Look > like hell but they work. > > -------- > Bob Turner > RV-10 QB > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=480318#480318 > > =========== =========== =========== =========== =========== > > ________________________________ Message 3 _____________________________________ Time: 06:57:41 AM PST US Subject: Re: RV10-List: Re: Sun Visor From: parish wqAKClNlbnQgZnJvbSBteSBULU1vYmlsZSA0RyBMVEUgRGV2aWNlCi0tLS0tLS0tIE9yaWdpbmFs IG1lc3NhZ2UgLS0tLS0tLS1Gcm9tOiBCaWxsIEJveWQgPHNwb3J0YXY4ckBnbWFpbC5jb20+IERh dGU6IDUvMjMvMTggIDk6MjMgQU0gIChHTVQtMDU6MDApIFRvOiBydjEwLWxpc3RAbWF0cm9uaWNz LmNvbSBTdWJqZWN0OiBSZTogUlYxMC1MaXN0OiBSZTogU3VuIFZpc29yIApSYWlzZSB5b3VyIGhh bmQgaWYgeW91J2QgbGlrZSB0byBzZWUgcGljcyBvZiBCb2IncyBESVkgdmlzb3JzLi4uCjotKQpP biBUdWUsIE1heSAyMiwgMjAxOCBhdCA0OjE0IFBNLCBCb2IgVHVybmVyIDxib2J0dXJuZXJAYWx1 bS5ycGkuZWR1PiB3cm90ZToKLS0+IFJWMTAtTGlzdCBtZXNzYWdlIHBvc3RlZCBieTogIkJvYiBU dXJuZXIiIDxib2J0dXJuZXJAYWx1bS5ycGkuZWR1PgoKCgpPa2F5IGd1eXMuIElmIHlvdSBwbGFj ZSBhbnkgdmFsdWUgb24g4oCYbG9va3PigJkganVzdCBza2lwIHRoaXMgcG9zdC4KCknigJlsbCBw YXkgYWlycGxhbmUgcHJpY2VzIGZvciBhaXJwbGFuZSBwYXJ0cywgYnV0IGEgc3VuIHZpc29yPyBJ IHRvb2sgYSBwaWVjZSBvZiAyeDQsIGRyaWxsZWQgYSBob2xlIHRocnUgaXQsIGN1dCBpdCBsZW5n dGh3aXNlIHNvIG5vdyBJIGhhZCB0d28gc2VtaS1jaXJjdWxhciBob2xlcywgcHV0IGl0IHRvZ2V0 aGVyIHdpdGggc29tZSBib2x0cyBhbmQgd2luZ251dHMgb24gdGhlIGNlbnRlciBwb3N0LiBUZW5z aW9uIG9uIHRoZSBib2x0cyBhZGp1c3RlZCBzbyBpdCBzbGlkZXMgdXAgYW5kIGRvd24gb24gdGhl IHBvc3Qgd2l0aCBzb21lIGZvcmNlIGFwcGxpZWQsIGJ1dCBvdGhlcndpc2Ugc3RheXMgcHV0LiBJ IHRoaW5rIEkgcHV0IHNvbWUgZmVsdCBvciB2ZWxjbyBpbnNpZGUgdGhlIGhvbGUsIG5vdCBzdXJl LiBUd28gZG93bCByb2RzIGV4dGVuZCBvdXQgaG9yaXpvbnRhbGx5IG9uIGVhY2ggc2lkZS4gQXR0 YWNoZWQgdG8gZWFjaCByb2QgaXMgYSBncmVlbiBwbGFzdGljIHZpc29yIGZyb20gQUNTIHdpdGgg aXRzIHN1Y3Rpb24gY3VwIHJlbW92ZWQgKCQxNSBpaXJjKS4gVGhlc2UgaGF2ZSBwcmV0dHkgZ29v ZCBvcHRpY2FsIHF1YWxpdHkuIEkgY2FuIG1vdmUgdGhlbSB1cC9kb3duLCBvciBzaWRlIHRvIHNp ZGUgYSBiaXQsIGJ1dCBubyBzaWRlIHdpbmRvdyBjb3ZlcmFnZS4gUm90YXRlIHVwIGFuZCBvdXQg b2YgdGhlIHdheSB3aGVuIG5vdCBpbiB1c2UuIExvb2sgbGlrZSBoZWxsIGJ1dCB0aGV5IHdvcmsu CgoKCi0tLS0tLS0tCgpCb2IgVHVybmVyCgpSVi0xMCBRQgoKCgoKCgoKCgpSZWFkIHRoaXMgdG9w aWMgb25saW5lIGhlcmU6CgoKCmh0dHA6Ly9mb3J1bXMubWF0cm9uaWNzLmNvbS92aWV3dG9waWMu cGhwP3A9NDgwMzE4IzQ4MDMxOAoKCgoKCgoKCgoKCgoKPT09PT09PT09PT09PT09PT09PT09PT09 PT09PT09PT09PT09CgotTGlzdCIgcmVsPSJub3JlZmVycmVyIiB0YXJnZXQ9Il9ibGFuayI+aHR0 cDovL3d3dy5tYXRyb25pY3MuY29tL05hdmlnYXRvcj9SVjEwLUxpc3QKCj09PT09PT09PT09PT09 PT09PT09PT09PT09PT09PT09PT09PQoKIEZPUlVNUyAtCgplZmVycmVyIiB0YXJnZXQ9Il9ibGFu ayI+aHR0cDovL2ZvcnVtcy5tYXRyb25pY3MuY29tCgo9PT09PT09PT09PT09PT09PT09PT09PT09 PT09PT09PT09PT0KCldJS0kgLQoKZXJyZXIiIHRhcmdldD0iX2JsYW5rIj5odHRwOi8vd2lraS5t YXRyb25pY3MuY29tCgo9PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT0KCmIgU2l0 ZSAtCgrCoCDCoCDCoCDCoCDCoCAtTWF0dCBEcmFsbGUsIExpc3QgQWRtaW4uCgpyZWw9Im5vcmVm ZXJyZXIiIHRhcmdldD0iX2JsYW5rIj5odHRwOi8vd3d3Lm1hdHJvbmljcy5jb20vY29udHJpYnV0 aW9uCgo9PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT0KCgoKCgoKCgoK ________________________________ Message 4 _____________________________________ Time: 08:18:22 AM PST US Subject: RV10-List: Re: Sun Visor From: "Greg McFarlane" Ive got the visors that Blue Sky make specifically for the RV10 and would recommend them. They are made well and they fit and work extremely well, and look good. Fitting was simple with each side only needing one hole in the pillar and secured by the one screw. After the initial fit I applied release agent to the square mounting peg and built up around the peg about 3/4inch with a epoxy/flox mix which gave more security and support to the mount and also a more finished look, IMHO Cheers from Western Australia Read this topic online here: http://forums.matronics.com/viewtopic.php?p=480345#480345 ________________________________ Message 5 _____________________________________ Time: 10:58:42 AM PST US From: Vernon Franklin Subject: Re: RV10-List: Re: Sun Visor Definitely! Bob, where are the goods? Vernon On Wed, May 23, 2018 at 9:03 AM parish wrote: > > > Sent from my T-Mobile 4G LTE Device > > -------- Original message -------- > From: Bill Boyd > Date: 5/23/18 9:23 AM (GMT-05:00) > To: rv10-list@matronics.com > Subject: Re: RV10-List: Re: Sun Visor > > Raise your hand if you'd like to see pics of Bob's DIY visors... > > :-) > > On Tue, May 22, 2018 at 4:14 PM, Bob Turner > wrote: > >> >> Okay guys. If you place any value on =98looks=99 just skip t his post. >> I=99ll pay airplane prices for airplane parts, but a sun visor? I took a >> piece of 2x4, drilled a hole thru it, cut it lengthwise so now I had two >> semi-circular holes, put it together with some bolts and wingnuts on the >> center post. Tension on the bolts adjusted so it slides up and down on t he >> post with some force applied, but otherwise stays put. I think I put som e >> felt or velco inside the hole, not sure. Two dowl rods extend out >> horizontally on each side. Attached to each rod is a green plastic visor >> from ACS with its suction cup removed ($15 iirc). These have pretty good >> optical quality. I can move them up/down, or side to side a bit, but no >> side window coverage. Rotate up and out of the way when not in use. Look >> like hell but they work. >> >> -------- >> Bob Turner >> RV-10 QB >> >> >> >> >> Read this topic online here: >> >> http://forums.matronics.com/viewtopic.php?p=480318#480318 >> >> >> >> >> >> >> ======================== =========== >> -List" rel="noreferrer" target="_blank">http://www.matronics.com/ >> Navigator?RV10-List >> ======================== =========== >> FORUMS - >> eferrer" target="_blank">http://forums.matronics.com >> ======================== =========== >> WIKI - >> errer" target="_blank">http://wiki.matronics.com >> ======================== =========== >> b Site - >> -Matt Dralle, List Admin. >> rel="noreferrer" target="_blank">http://www.matronics.com/contributi on >> ======================== =========== >> >> >> >> > -- Vernon Franklin ________________________________ Message 6 _____________________________________ Time: 12:40:44 PM PST US Subject: RV10-List: Wing attach hardware From: Gordon Anderson Has anyone else out there noted that the single washer specified for each of the NAS wing attach bolts (page 44-11 figure 1) is not sufficient to prevent the nut binding up on the bolt thread runout before fully clamping the wing spars? Just curious if mine are an anomaly or if everyone spots the problem and fixes it by adding extra washers. Gordon 41015 in final assembly, Switzerland ________________________________ Message 7 _____________________________________ Time: 01:37:15 PM PST US From: "Albert" Subject: RV10-List: SkyBeacon ADS-B Out Solution Has anyone installed the SkyBeacon on a RV-10? Would like to see a report if so. Thanks, Albert Gardner RV-10 N991RV Yuma, AZ ________________________________ Message 8 _____________________________________ Time: 01:47:04 PM PST US Subject: Re: RV10-List: SkyBeacon ADS-B Out Solution From: Tim Olson If the software is anything like that of the Echo, I'd avoid it in a big way. Get something good and reliable with full aviation integration. Tim On 5/23/2018 3:33 PM, Albert wrote: > > Has anyone installed the SkyBeacon on a RV-10? Would like to see a report if > so. > Thanks, > Albert Gardner > RV-10 N991RV > Yuma, AZ > ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message rv10-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/RV10-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/rv10-list Browse Digests http://www.matronics.com/digest/rv10-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.