---------------------------------------------------------- RV10-List Digest Archive --- Total Messages Posted Sat 11/24/18: 3 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 02:20 AM - Re: Re: Door interior (John MacCallum) 2. 05:56 AM - Re: Re: Door interior (Kelly McMullen) 3. 02:34 PM - Re: Re: Door interior (John MacCallum) ________________________________ Message 1 _____________________________________ Time: 02:20:54 AM PST US From: John MacCallum Subject: Re: RV10-List: Re: Door interior Hi David, I installed a Overhead Console in my 10. I did so because I thought if I ever wanted to put Air Conditioning in it would be handy to have it there already. I havent done so as yet but I did put Map Lights where the Vents would go if I had have. In hind sight the Overhead console looks good and it does give you somewhere for your Head Sets to hang off and also have the Cabin Lights installed there on. It really wasnt hard to install and maybe took me about 8 or 10 hours including putting the lights in. Its your plane in the final analysis so you do what you would like. Cheers John MacCallum VH-DUU > On 22 Nov 2018, at 4:07 pm, David J. Fritzsche wrote: > > > This discussion is very interesting. I have been kicking around what to do with my interior, doors, inside, maybe overhead console, maybe not, headliner, etc. It is about decision time if I am ever going to finish the plane. I need to change some personal priorities. I appreciate the help some of you have provided when I had specific questions I directed at a few members. Always enjoy advice from those who have gone before. > > David > >> On 11/21/2018 11:41 AM, David Maib wrote: >> >> Im still on regular cylinders with the same light fabric from Abby that Tim describes. I also have the flush door handles. No problems. >> >> David Maib >> >> >>> On Nov 21, 2018, at 2:07 PM, Tim Olson wrote: >>> >>> >>> I wouldn't say it's a guaranteed problem. I'm still >>> running my original 2005 gas cylinders, with fabric covered >>> doors, and it hasn't been a problem yet. The doors are >>> fully resting open right now, in fact. >>> >>> I also think that having at least some sort of covering >>> will help a little to deaden sound. That said, a painted >>> door will look just fine too. I wouldn't hesitate to put >>> light fabric on again, myself. >>> Tim >>> >>>> On 11/21/2018 12:21 PM, Bill Watson wrote: >>>> Ditto on the weight and higher pressure gas cylinder. >>>>> On 11/21/2018 9:27 AM, bill.peyton wrote: >>>>> >>>>> I painted the interior of my doors. I used an epoxy based single stage paint with a flattening agent. To add texture to the surface I came back and spayed with a 1-3psi setting on the paint gun. This "spattered" liquid paint on to the surface. When it dries it looks slightly textured. I did this for all the interior surfaces that show. I also have the Aerosport headliner and interior panels. I matched the paint to the kydex interior panels. It is very difficult to put the material on the door surface and get a nice looking finish around the edges and windows. In addition, it adds weight to the door, which will cause you to use the higher pressure gas struts. >>>>> >>>>> -------- >>>>> Bill >>>>> WA0SYV >>>>> Aviation Partners, LLC >>>>> >>>>> >>>>> >>>>> >>>>> Read this topic online here: >>>>> >>>>> http://forums.matronics.com/viewtopic.php?p=485473#485473 >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>> --- >>>> This email has been checked for viruses by Avast antivirus software. >>>> https://www.avast.com/antivirus >>> >>> >>> >>> >> >> >> >> > > > ________________________________ Message 2 _____________________________________ Time: 05:56:50 AM PST US From: Kelly McMullen Subject: Re: RV10-List: Re: Door interior I think you will find a fair number of -10 builders combined the overhead console with two NACA scoops behind the baggage compartment to feed air vents overhead. It makes a big difference for me in Aridzona. I also installed map lights next to the vents. Sent from my IBM-360 main frame On Sat, Nov 24, 2018 at 3:25 AM John MacCallum wrote: > john.maccallum@bigpond.com> > > Hi David, > I installed a Overhead Console in my 10. I did so because I thought if I > ever wanted to put Air Conditioning in it would be handy to have it there > already. I haven=99t done so as yet but I did put Map Lights where the Vents > would go if I had have. In hind sight the Overhead console looks good and > it does give you somewhere for your Head Sets to hang off and also have t he > Cabin Lights installed there on. It really wasn=99t hard to instal l and > maybe took me about 8 or 10 hours including putting the lights in. > It=99s your plane in the final analysis so you do what you would li ke. > > Cheers > John MacCallum > VH-DUU > > > On 22 Nov 2018, at 4:07 pm, David J. Fritzsche > wrote: > > m > > > > > > This discussion is very interesting. I have been kicking around what t o > do with my interior, doors, inside, maybe overhead console, maybe not, > headliner, etc. It is about decision time if I am ever going to finish t he > plane. I need to change some personal priorities. I appreciate the help > some of you have provided when I had specific questions I directed at a f ew > members. Always enjoy advice from those who have gone before. > > > > David > > > >> On 11/21/2018 11:41 AM, David Maib wrote: > >> > >> I=99m still on regular cylinders with the same light fabric from Abby > that Tim describes. I also have the flush door handles. No problems. > >> > >> David Maib > >> > >> > >>> On Nov 21, 2018, at 2:07 PM, Tim Olson wrote: > >>> > >>> > >>> I wouldn't say it's a guaranteed problem. I'm still > >>> running my original 2005 gas cylinders, with fabric covered > >>> doors, and it hasn't been a problem yet. The doors are > >>> fully resting open right now, in fact. > >>> > >>> I also think that having at least some sort of covering > >>> will help a little to deaden sound. That said, a painted > >>> door will look just fine too. I wouldn't hesitate to put > >>> light fabric on again, myself. > >>> Tim > >>> > >>>> On 11/21/2018 12:21 PM, Bill Watson wrote: > >>>> Ditto on the weight and higher pressure gas cylinder. > >>>>> On 11/21/2018 9:27 AM, bill.peyton wrote: > billpeyton9@gmail.com> > >>>>> > >>>>> I painted the interior of my doors. I used an epoxy based single > stage paint with a flattening agent. To add texture to the surface I cam e > back and spayed with a 1-3psi setting on the paint gun. This "spattere d" > liquid paint on to the surface. When it dries it looks slightly textured .. > I did this for all the interior surfaces that show. I also have the > Aerosport headliner and interior panels. I matched the paint to the kyde x > interior panels. It is very difficult to put the material on the door > surface and get a nice looking finish around the edges and windows. In > addition, it adds weight to the door, which will cause you to use the > higher pressure gas struts. > >>>>> > >>>>> -------- > >>>>> Bill > >>>>> WA0SYV > >>>>> Aviation Partners, LLC > >>>>> > >>>>> > >>>>> > >>>>> > >>>>> Read this topic online here: > >>>>> > >>>>> http://forums.matronics.com/viewtopic.php?p=485473#485473 > >>>>> > >>>>> > >>>>> > >>>>> > >>>>> > >>>>> > >>>>> > >>>>> > >>>>> > >>>>> > >>>> --- > >>>> This email has been checked for viruses by Avast antivirus software. > >>>> https://www.avast.com/antivirus > >>> > >>> > >>> > >>> > >> > >> > >> > >> > > > > > > > > =========== =========== =========== =========== =========== =========== > > ________________________________ Message 3 _____________________________________ Time: 02:34:32 PM PST US From: John MacCallum Subject: Re: RV10-List: Re: Door interior Yes I have seen that done a few times. It gets well over 40 deg C here in Na rromine, NSW in Summer so it would be a good feature! It=99s always a race always to get to 7 or 8 thousand feet to cool off ! Cheers John MacCallum VH-DUU RV10 41016 > On 25 Nov 2018, at 12:54 am, Kelly McMullen wrote: > > I think you will find a fair number of -10 builders combined the overhead c onsole with two NACA scoops behind the baggage compartment to feed air vents overhead. It makes a big difference for me in Aridzona. I also installed ma p lights next to the vents. > Sent from my IBM-360 main frame > > >> On Sat, Nov 24, 2018 at 3:25 AM John MacCallum wrote: om> >> >> Hi David, >> I installed a Overhead Console in my 10. I did so because I thought if I ever wanted to put Air Conditioning in it would be handy to have it there a lready. I haven=99t done so as yet but I did put Map Lights where the V ents would go if I had have. In hind sight the Overhead console looks good a nd it does give you somewhere for your Head Sets to hang off and also have t he Cabin Lights installed there on. It really wasn=99t hard to instal l and maybe took me about 8 or 10 hours including putting the lights in. >> It=99s your plane in the final analysis so you do what you would li ke. >> >> Cheers >> John MacCallum >> VH-DUU >> >> > On 22 Nov 2018, at 4:07 pm, David J. Fritzsche wrot e: >> > m> >> > >> > This discussion is very interesting. I have been kicking around what t o do with my interior, doors, inside, maybe overhead console, maybe not, hea dliner, etc. It is about decision time if I am ever going to finish the pla ne. I need to change some personal priorities. I appreciate the help some o f you have provided when I had specific questions I directed at a few member s. Always enjoy advice from those who have gone before. >> > >> > David >> > >> >> On 11/21/2018 11:41 AM, David Maib wrote: >> >> >> >> I=99m still on regular cylinders with the same light fabric from Abby that Tim describes. I also have the flush door handles. No problems. >> >> >> >> David Maib >> >> >> >> >> >>> On Nov 21, 2018, at 2:07 PM, Tim Olson wrote: >> >>> >> >>> >> >>> I wouldn't say it's a guaranteed problem. I'm still >> >>> running my original 2005 gas cylinders, with fabric covered >> >>> doors, and it hasn't been a problem yet. The doors are >> >>> fully resting open right now, in fact. >> >>> >> >>> I also think that having at least some sort of covering >> >>> will help a little to deaden sound. That said, a painted >> >>> door will look just fine too. I wouldn't hesitate to put >> >>> light fabric on again, myself. >> >>> Tim >> >>> >> >>>> On 11/21/2018 12:21 PM, Bill Watson wrote: >> >>>> Ditto on the weight and higher pressure gas cylinder. >> >>>>> On 11/21/2018 9:27 AM, bill.peyton wrote: om> >> >>>>> >> >>>>> I painted the interior of my doors. I used an epoxy based single s tage paint with a flattening agent. To add texture to the surface I came ba ck and spayed with a 1-3psi setting on the paint gun. This "spattered" li quid paint on to the surface. When it dries it looks slightly textured. I d id this for all the interior surfaces that show. I also have the Aerosport h eadliner and interior panels. I matched the paint to the kydex interior pan els. It is very difficult to put the material on the door surface and get a nice looking finish around the edges and windows. In addition, it adds wei ght to the door, which will cause you to use the higher pressure gas struts. >> >>>>> >> >>>>> -------- >> >>>>> Bill >> >>>>> WA0SYV >> >>>>> Aviation Partners, LLC >> >>>>> >> >>>>> >> >>>>> >> >>>>> >> >>>>> Read this topic online here: >> >>>>> >> >>>>> http://forums.matronics.com/viewtopic.php?p=485473#485473 >> >>>>> >> >>>>> >> >>>>> >> >>>>> >> >>>>> >> >>>>> >> >>>>> >> >>>>> >> >>>>> >> >>>>> >> >>>> --- >> >>>> This email has been checked for viruses by Avast antivirus software. >> >>>> https://www.avast.com/antivirus >> >>> >> >>> >> >>> >> >>> >> >> >> >> >> >> >> >> >> > >> > >> > >> >> >> ========== >> br> fts!) >> r> > e.com" rel="noreferrer" target="_blank">www.mypilotstore.com >> rel="noreferrer" target="_blank">http://www.matronics.com/contributio n >> -Matt Dralle, List Admin. >> ========== >> -List" rel="noreferrer" target="_blank">http://www.matronics.com/Navi gator?RV10-List >> ========== >> FORUMS - >> eferrer" target="_blank">http://forums.matronics.com >> ========== >> WIKI - >> errer" target="_blank">http://wiki.matronics.com >> ========== >> b Site - >> -Matt Dralle, List Admin. >> rel="noreferrer" target="_blank">http://www.matronics.com/contributio n >> ========== >> >> >> ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message rv10-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/RV10-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/rv10-list Browse Digests http://www.matronics.com/digest/rv10-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.