---------------------------------------------------------- RV10-List Digest Archive --- Total Messages Posted Thu 10/15/20: 7 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 03:56 AM - Re: RV10 Main Tire tubes (Ron Walker) 2. 06:45 AM - Main Gear Tire Tubes (Doc) 3. 10:08 AM - Re: Yaw servo installation using RV-14 kit (Vol88) 4. 01:24 PM - Sky-Tec starters (dlm) 5. 01:53 PM - Re: Yaw servo installation using RV-14 kit (David Carr) 6. 02:13 PM - Re: Sky-Tec starters (Don McDonald) 7. 03:33 PM - Re: Sky-Tec starters (Kelly McMullen) ________________________________ Message 1 _____________________________________ Time: 03:56:32 AM PST US Subject: Re: RV10-List: RV10 Main Tire tubes From: Ron Walker It really should have been 15.00x6.00-6 A quick Amazon search yields: https://www.amazon.com/Stens-170-054-Tube/dp/B001OK6O2I/ref=sr_1_23?dchild=1&keywords=15x6.00-6+tr7+tube&qid=1602758998&s=automotive&sr=1-23 or https://www.amazon.com/TUBE-6-00-6-TR87-Manufacturer-320290-AD/dp/B008Y2CC6Q/ref=psdc_404809011_t4_B001OK6O2I For 12 bucks, it's not a huge impact to just order one and see if it works for your situation. --Ron On 10/14/20 8:40 PM, William Greenley wrote: > What is the tube part number, I could not find anything with Carlisle > 1500x6.00-6 T7? ________________________________ Message 2 _____________________________________ Time: 06:45:10 AM PST US From: Doc Subject: RV10-List: Main Gear Tire Tubes Guys: My error . The Carlisle Tube 15x6x6 is a TR87 (not T7). Carlisle part no. is 320290. Doc ________________________________ Message 3 _____________________________________ Time: 10:08:34 AM PST US Subject: RV10-List: Re: Yaw servo installation using RV-14 kit From: "Vol88" I installed the Van's yaw damper kit for Skyview ($160), which does not come with the tiller arm/bow (Garmin may call it a hoop) that connects the rudder cables to the servo. That is another $160 from Dynon. I also read on VAF that Garmin does not sell the hoop separately, only in their $550 kit, although Stein apparently had some hoops in stock. Someone posted a template to make your own hoop on VAF here: https://vansairforce.net/community/showthread.php?t=153870&page=6 You would still need to buy the Van's yaw damper mount. Tom Read this topic online here: http://forums.matronics.com/viewtopic.php?p=498838#498838 ________________________________ Message 4 _____________________________________ Time: 01:24:30 PM PST US From: dlm Subject: RV10-List: Sky-Tec starters time to overhaul the starter; anybody got a good and economical shop recommendation for the overhaul? ________________________________ Message 5 _____________________________________ Time: 01:53:53 PM PST US From: David Carr Subject: Re: RV10-List: Yaw servo installation using RV-14 kit Thanks for the help, lots of great experience on this list! David On Tue, Oct 13, 2020 at 6:15 PM Dan Beacom wrote: > > Same here. > > -Dan Beacom > > Sent from my iPad > > > On Oct 13, 2020, at 5:55 PM, Robert Skinner > wrote: > > > robskinner@sbcglobal.net> > > > > I did. It was easy and works just fine. > > > > Sent from Robert's > > > > > >> On Oct 13, 2020, at 5:16 PM, David Carr wrote: > >> > >> =EF=BB > >> Hi list, > >> > >> Has anyone attempted to install a Garmin yaw servo using the Van's > RV-14 yaw servo mounting kit? Trying to decide whether to go that route or > spring for the $550 Garmin kit. I'm working on a flying airplane, so all > fun will be had on hands and knees in the tailcone! > >> > >> David > > > > > > > > > > > =========== =========== =========== =========== =========== > > ________________________________ Message 6 _____________________________________ Time: 02:13:00 PM PST US From: Don McDonald Subject: Re: RV10-List: Sky-Tec starters A few friends here in Granbury TX (pecan Plantation)=C2- used to own bot h Sky Tech (starters) and Plane Power (alternators), but were bought out by Hartzell.... and they don't repair anything. On Thursday, October 15, 2020, 03:37:44 PM CDT, dlm wrote: time to overhaul the starter; anybody got a good and economical shop recom mendation for the overhaul? ________________________________ Message 7 _____________________________________ Time: 03:33:23 PM PST US Subject: Re: RV10-List: Sky-Tec starters From: Kelly McMullen Dave, Sorry, Skytec AFAIK has not released overhaul data, so only they can overhaul. I last had one done about 10 years ago. Service was like 1 day turnaround. At the time price was about $160. No clue what it is today. IIRC, it was about 50% of price of new one for certified aircraft. Kelly On 10/15/2020 1:20 PM, dlm wrote: > time to overhaul the starter; anybody got a good and economical shop > recommendation for the overhaul? ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message rv10-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/RV10-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/rv10-list Browse Digests http://www.matronics.com/digest/rv10-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.