Today's Message Index:
----------------------
1. 11:31 AM - Re: Door Weatherstripping (Robert Jones)
2. 05:34 PM - Re: Door Weatherstripping (Kelly McMullen)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Door Weatherstripping |
That would depend on which method you used to do the original weatherstrippi
ng. I used the 3/8X7/32 from McMaster Car available here https://www.mcmaste
r.com/door-seals/water-and-weather-resistant-hollow-foam-rubber-surface-moun
t-seals/
I left as much door frame material as possible and put this in the channel t
o be compressed as the door closes. Others used something like this https://
www.mcmaster.com/door-seals/oil-resistant-push-on-seals-with-bulb-on-side/.
They ground away enough of the door frame to push this on the edge to give a
good seal. The original choice and current fit will determine what will wor
k as a replacement.
Robert Jones
> On Nov 17, 2021, at 4:53 PM, Jim Combs <jiminlexky@gmail.com> wrote:
>
>
> I am 10 years in and need to replace my door weatherstripping.
>
> Anyone wish to share what they are using (Part number / Source?)
>
> Thanks, Jim Combs
> N312F (1470 hours)
==========================
=========
==========================
=========
==========================
=========
==========================
=========
==========================
=========
>
>
>
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Door Weatherstripping |
I did not modify my door frame for the Grainger seals. I got my seals from
https://www.aircraftdoorseals.com/categories/vans-aircraft/rv-10.html
Call and verify to get what you need, as the price was about double what is
shown, earlier this year. Easy to install, seems to be fine so far.
On Wed, Nov 17, 2021 at 5:53 PM Jim Combs <jiminlexky@gmail.com> wrote:
>
> I am 10 years in and need to replace my door weatherstripping.
>
> Anyone wish to share what they are using (Part number / Source?)
>
> Thanks, Jim Combs
> N312F (1470 hours)
>
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|