Today's Message Index:
----------------------
1. 07:23 AM - Aeroshell 6 (Marcus Cooper)
2. 07:42 AM - Re: Aeroshell 6 (Bob Leffler)
3. 07:59 AM - Re: Aeroshell 6 (Saint Aviation)
4. 04:53 PM - Re: Aeroshell 6 (Bob Turner)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Im slow getting my conditional inspection done this year in part due to no availability
of Aeroshell 6 for the prop hub. Does anyone have a source for 14 oz
tubes or a good alternative? Everything Ive come across indicates you have to
do a complete gun disassembly to switch to a different grease.
Thanks,
Marcus
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Hartzell switched to a different product last year, but I don=92t know if y
ou can co-mingle the grease. I suspect not.
I made the switch when I had my prop serviced last year.
Get Outlook for iOS<https://aka.ms/o0ukef>
________________________________
From: owner-rv10-list-server@matronics.com <owner-rv10-list-server@matronic
s.com> on behalf of Marcus Cooper <cooprv7@yahoo.com>
Sent: Thursday, December 8, 2022 10:22:58 AM
Subject: RV10-List: Aeroshell 6
I=92m slow getting my conditional inspection done this year in part due to
no availability of Aeroshell 6 for the prop hub. Does anyone have a source
for 14 oz tubes or a good alternative? Everything I=92ve come across indic
ates you have to do a complete gun disassembly to switch to a different gre
ase.
Thanks,
Marcus
Message 3
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
You can absolutely NOT co-mingle the grease. They have been using the
new grease for several years now. There will be a sticker on the prop
hub (mostly hidden by the spinner front plate) that will say what grease
is used. They say that if you use the wrong grease, you have 25 hours to
get the prop torn down, cleaned and resealed. Don=99t ask me how I
know. Make sure you use the grease that is in the hub.
Also, most prop shops tell me that the grease needs to be added every
100-500 hours (differing based on the source), not necessarily every
year.
Jesse Saint
Saint Aviation, Inc.
jesse@saintaviation.com
C: 352-427-0285
> On Dec 8, 2022, at 10:42 AM, Bob Leffler <bob@thelefflers.com> wrote:
>
> Hartzell switched to a different product last year, but I don=99t
know if you can co-mingle the grease. I suspect not.
>
> I made the switch when I had my prop serviced last year.
>
> Get Outlook for iOS <https://aka.ms/o0ukef>
> From: owner-rv10-list-server@matronics.com
<owner-rv10-list-server@matronics.com> on behalf of Marcus Cooper
<cooprv7@yahoo.com>
> Sent: Thursday, December 8, 2022 10:22:58 AM
> To: rv10-list@matronics.com <rv10-list@matronics.com>
> Subject: RV10-List: Aeroshell 6
>
>
> I=99m slow getting my conditional inspection done this year in
part due to no availability of Aeroshell 6 for the prop hub. Does anyone
have a source for 14 oz tubes or a good alternative? Everything I=99
ve come across indicates you have to do a complete gun disassembly to
switch to a different grease.
>
> Thanks,
> Marcus
>
>
> ==========
> Email Forum -
> -List">http://www.matronics.com/Navigator?RV10-List
> ==========
> p; - MATRONICS WEB FORUMS -
> ums.matronics.com
> ==========
> p; - NEW MATRONICS LIST WIKI -
> matronics.com
> ==========
> p; - List Contribution Web Site -
> p; -Matt Dralle, List Admin.
> ps://matronics.com/contribution
> ==========
>
>
>
Message 4
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Yep, the "new grease" (Nyco something??)can NOT be mixed with Aeroshell 6, you
need to take the hub apart and clean out all the old grease. However, Aeroshell
5 can be mixed with 6 (you have to placard against low temperature operations,
I forget the number but it's pretty cold.) if you can find that. In line with
an earlier post, I know of at least one A&P who recommends never re-greasing
the hub, as over-greasing causes all sorts of problems. Of course this is contrary
to Hartzell's instructions, do at your own risk.
--------
Bob Turner
RV-10 QB
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=509477#509477
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|