Today's Message Index:
----------------------
1. 06:49 AM - Day 20 (Albert Gardner)
2. 09:20 AM - Re: Day 20 (rveighta@comcast.net)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Finished the side skins today and started work on the roll bar. Prety
ingenious method of making the roll bar. All the pieces fit together
very well. Got to get the fuse down off the work bench now. Looks like
it's going to be too high to work on the inside up there.
Albert Gardner
RV-10 N991RV
Yuma, AZ
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Albert, I'm a little bit ahead of you on fuselage progress, and I found it
easier to work inside the fuselage with it turned on it's side on
a couple of low sawhorses.=C2- By the way, when you get to the fuel lines
, it may help to practice making the tubing bends with some
scrap tubing before attempting your first run. I didn't and messed up the r
un from the fuel pump to the tank.
Walt Shipley
RV8, RV8A, RV12 Fuselage
----- Original Message -----
From: "Albert Gardner" <ibspud@roadrunner.com>
Sent: Saturday, August 21, 2010 9:48:59 AM
Subject: RV12-List: Day 20
Finished the side skins today and started work on the roll bar. Prety ingen
ious method of making the roll bar. All the pieces fit together very well.
Got to get the fuse down off the work bench now. Looks like it's going to b
e too high to work on the inside up there. Albert Gardner RV-10 N991RV Yuma
, AZ =C2-
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|